Prity K1-9 kW Uputstvo za upotrebu peći na drva

1. Uvod

This manual provides essential information for the safe and efficient installation, operation, and maintenance of your Prity K1-9 kW wood-burning stove. Please read these instructions carefully before using the appliance and retain them for future reference. Proper installation and adherence to these guidelines will ensure optimal performance, safety, and longevity of your stove.

2. Sigurnosne informacije

Always prioritize safety when installing and operating your wood-burning stove. Failure to follow safety instructions can result in fire, property damage, or personal injury.

2.1 Opće sigurnosne smjernice

• Ensure the stove is installed by a qualified professional in accordance with all local and national building and fire safety regulations.
• Only use approved fuels as specified in this manual.
• Držite djecu i kućne ljubimce dalje od vrućih površina peći.
• Ne skladištite zapaljive materijale u blizini peći.
• Regularly inspect and clean the chimney and flue pipe to prevent creosote buildup.
• Always have a working smoke detector and carbon monoxide detector in your home.

2.2 Minimalne udaljenosti od zapaljivih materijala

Održavajte sljedeće minimalne udaljenosti od zapaljivih materijala kako biste spriječili opasnost od požara:

• pozadi: 400 mm
• Sides (Left and Right): 400 mm
• Front (in the entire radiation area of the pane): 800 mm
• plafon: 600 mm
• sprat: 0 mm (if non-combustible hearth is used)

Ensure the floor beneath the stove and extending beyond the minimum front and side clearances is made of a non-combustible material.

2.3 Permitted Fuel

Samo koristiti suho ogrjevno drvo i drveni briketi. Wood moisture content should be 16% ± 4% according to EN 13240:2006, EN 13229:2006, EN 12815:2006 Annex B, Table B.1. Do not burn treated wood, household waste, plastics, or any other unauthorized materials, as this can damage the stove, create hazardous emissions, and void your warranty.

3. Proizvod je gotovview

The Prity K1-9 kW wood-burning stove is designed for efficient heating with a focus on durability and user-friendly features. It features a robust construction and a classic design.

3.1 Ključne karakteristike

• Right-hand door with large, straight ceramic glass for a clear view od plamena.
• Durable black lacquered metal body.
• Combustion chamber lined with fireclay for improved heat retention and resistance to permanent combustion.
• Discreet wooden handles for comfortable and safe operation.
• Separate primary and secondary air controls for efficient combustion management.
• Capable of accommodating large logs.
• Equipped with a large, easily accessible ash pan.
• Integrated wood storage compartment below the firebox.
• Butterfly valve in the flue gas pipe for regulating draft and optimizing flue gas temperature.

3.2 Komponente proizvoda

Slika 1: Front view of the Prity K1-9 kW wood-burning stove in operation, showcasing the large glass door and the fire within the combustion chamber. The top flue pipe connection is visible.

Slika 2: Front view of the Prity K1-9 kW wood-burning stove without fire, showing the interior of the combustion chamber lined with fireclay and the ash pan below.

Slika 3: The Prity K1-9 kW wood-burning stove installed in a room, demonstrating its freestanding nature and the integrated wood storage compartment filled with logs.

Slika 4: Pozadi view of the Prity K1-9 kW wood-burning stove, showing the solid construction and the top flue pipe connection.

4. Postavljanje i instalacija

Installation must be performed by a certified installer and comply with all relevant local and national regulations, including those concerning chimney construction and ventilation.

4.1 Location and Hearth Requirements

• Position the stove on a level, non-combustible hearth that extends beyond the minimum clearances specified in Section 2.2.
• Ensure adequate ventilation in the room where the stove is installed to support combustion and prevent negative pressure.

4.2 Priključak dimovodne cijevi

• The stove features a top flue pipe connection with a diameter of 130 mm.
• Connect the stove to a suitable chimney system using appropriate flue pipes and connectors. Ensure all connections are sealed and airtight.
• The chimney must be of adequate height and diameter to provide the required draft (minimum 12 Pa at nominal heat output).

4.3 First Firing

During the first few firings, the paint on the stove may emit an odor and some smoke as it cures. Ensure the room is well-ventilated during this period. Start with small fires and gradually increase the heat over several days to allow the materials to settle.

5. Uputstvo za upotrebu

5.1 Utovar goriva

• Open the combustion chamber door and place dry firewood or wood briquettes onto the horizontal grate.
• Do not overfill the combustion chamber. Leave space for air circulation.
• Close the door securely after loading fuel.

5.2 Kontrole zraka

The Prity K1-9 kW stove features separate primary and secondary air controls:

• primarni zrak: Used for ignition and burning solid fuels from below. Open fully during ignition and adjust as needed for sustained burning.
• Sekundarni zrak: Introduced above the fuel to burn off uncombusted gases, increasing efficiency and reducing emissions. Adjust for a clean burn and clear glass.

5.3 Leptir ventil

The butterfly valve in the flue pipe allows for fine-tuning of the draft. Adjust it to control the intensity of the fire and optimize flue gas temperature. Close it partially to slow down the burn, and open it more to increase the draft.

5.4 Ash Pan

The large ash pan collects ash from the combustion process. Regularly empty the ash pan to prevent ash buildup from obstructing the primary air supply and affecting combustion efficiency.

6. Održavanje

Redovno održavanje je ključno za siguran i efikasan rad vaše peći.

6.1 Uklanjanje pepela

• Allow the stove to cool completely before removing ash.
• Carefully slide out the ash pan and dispose of the ash in a non-combustible container. Even cold-looking ash can contain hot embers.
• Do not let ash accumulate to the point where it touches the grate.

6.2 Čišćenje stakla

• Clean the ceramic glass when the stove is cold.
• Use a specialized glass cleaner for wood stoves or a damp cloth dipped in fine ash to remove soot.
• Avoid abrasive cleaners or sharp objects that could scratch the glass.

6.3 Čišćenje dimnjaka i dimovodnih cijevi

• Have your chimney and flue pipes inspected and cleaned by a certified chimney sweep at least once a year, or more frequently if you burn continuously.
• This prevents creosote buildup, which is a major cause of chimney fires.

6.4 Opšti pregled

• Periodically check door seals, hinges, and air controls for wear and tear. Replace worn parts as necessary.
• Ensure the fireclay lining is intact. Minor cracks are normal, but significant damage may require replacement.

7. Otkrivanje problema

Ovaj odjeljak se bavi uobičajenim problemima s kojima se možete susresti prilikom korištenja peći na drva.

7.1 Poor Draft / Smoke Spillage

• Uzrok: Cold chimney, blocked flue, insufficient air supply, or negative room pressure.
• Rješenje: Ensure chimney is warm before lighting (use a firelighter). Check for blockages in the flue pipe or chimney. Open primary air fully. Ensure adequate room ventilation.

7.2 Excessive Smoke / Inefficient Burn

• Uzrok: Wet fuel, insufficient air, or incorrect air control settings.
• Rješenje: Use only dry firewood. Increase primary and secondary air supply. Adjust butterfly valve for better draft.

7.3 Glass Blackening

• Uzrok: Wet fuel, low burning temperature, or insufficient secondary air.
• Rješenje: Ensure fuel is dry. Burn hotter fires. Increase secondary air to promote cleaner combustion. Clean glass as per Section 6.2.

For persistent issues, consult a qualified stove technician.

8. Specifikacije

Technical details for the Prity K1-9 kW Wood-Burning Stove:

Slika 5: Energy Efficiency Label, indicating an A-class rating and 9.0 kW nominal heat output for the Prity K1 series.

Slika 6: Declaration of Performance (DoP) for the Prity K1 series, detailing essential characteristics and performance values in English, including minimum clearances and emissions data.

9. Garancija i podrška

Information regarding specific warranty terms is not provided in the product details. Please refer to your purchase documentation or contact your retailer for warranty details.

9.1 Rezervni dijelovi

Information regarding the availability of spare parts is currently unavailable. For inquiries about replacement parts, please contact your retailer or the manufacturer, Prity.

9.2 Kontakt proizvođača

For further assistance or technical support, please contact Prity or your authorized dealer.

Proizvođač: Prity 95 Ltd
Adresa: 33, M. Raikovitch str., 5140 Lyaskovets, Bulgaria