3M Performance Spray Gun Starter Kit 26778

1. Uvod

This manual provides essential instructions for the safe and effective use of the 3M Performance Spray Gun Starter Kit, Model 26778. This kit is designed for professional painters and includes the 3M Performance Spray Gun, PPS Series 2.0 Paint Spray Cup System, and various replaceable Gravity HVLP Atomizing Heads. The system is engineered to optimize paint application for automotive coatings, including solid colors, pearls, metallics, clearcoats, sealers, and primers.

The 3M Performance Spray Gun features a lightweight, impact-resistant composite body reinforced with stainless steel, and a unique replaceable nozzle system that prevents paint from passing through the gun body, simplifying cleaning and reducing cross-contamination risks.

2. Važne informacije o sigurnosti

UPOZORENJE: This product is intended for industrial and professional use only. It is not designed or packaged for consumer sale or use. Users must be trained professionals and operate the equipment in compliance with all relevant regulations and standards (e.g., OSHA, ANSI), as well as all product documentation, instructions for use, warnings, and restrictions.

Improper use of 3M industrial and commercial products can lead to injury, illness, or death. Consult your safety professionals, industrial hygienists, or other local experts for assistance with product selection and use. For additional product information, visit www.3M.com.

• Always wear appropriate personal protective equipment (PPE), including respiratory protection, eye protection, and gloves, when operating the spray gun.
• Ensure adequate ventilation in the work area to prevent inhalation of hazardous fumes.
• Nikada ne usmjeravajte pištolj za prskanje prema sebi ili drugima.
• Disconnect the air supply before performing any maintenance, cleaning, or changing components.
• Koristite samo originalne 3M rezervne dijelove i pribor.
• Dispose of waste materials, including used atomizing heads and PPS cups, according to local environmental regulations.

3. Komponente kompleta

The 3M Performance Spray Gun Starter Kit 26778 includes the following items:

• 1 x 3M Performance Spray Gun body
• 15 x Gravity HVLP Atomizing Heads (5 each of sizes 1.2, 1.3, and 1.4)
• 1 x 3M PPS Series 2.0 Cup
• 5 x Standard size disposable liners
• 4 x Standard size disposable lids with 200 micron filter
• 1 x Standard size disposable lid with 125 micron filter
• 3 x Sealing plugs
• 1 x ogrlica za zaključavanje
• 1 x Airflow control valve

Image 1: All components of the 3M Performance Spray Gun Starter Kit 26778, including the spray gun, multiple atomizing heads, PPS cups, liners, and lids.

Slika 2: Zatvarač view of the 3M Performance Spray Gun, PPS Series 2.0 cup, and various atomizing heads.

4. Upute za postavljanje

1. Attach Airflow Control Valve: Connect the airflow control valve to the air inlet of the spray gun body. Ensure a secure, airtight connection.
2. Odaberite glavu za raspršivanje: Choose the appropriate atomizing head size (1.2, 1.3, or 1.4) based on the coating material and desired finish.
3. Pričvrstite glavu za raspršivanje: Align the selected atomizing head with the front of the spray gun body. Secure it by turning the quick-turn locking collar until it is firmly in place.
4. Assemble PPS Series 2.0 Cup:
   • Insert a disposable liner into the PPS Series 2.0 Cup.
   • Pour the prepared coating material into the liner.
   • Select the appropriate disposable lid (200 micron for most coatings, 125 micron for finer finishes) and snap it onto the liner.
   • Attach the assembled PPS cup system to the spray gun body. Ensure the lid's connection point aligns with the atomizing head.
5. Priključite dovod zraka: Connect your air compressor hose to the airflow control valve. Ensure the air pressure is set according to the coating manufacturer's recommendations and the spray gun's specifications (maximum 130.53 PSI).

Image 3: The 3M Performance Spray Gun and its components, illustrating how they fit together during assembly.

5. Uputstvo za upotrebu

The 3M Performance Spray Gun is designed for high transfer efficiency and a large, adjustable fan pattern, providing a smooth trigger pull for consistent application.

1. Podesite pritisak zraka: Use the airflow control valve to fine-tune the air pressure to achieve the desired spray pattern and atomization for your specific coating. Refer to the coating manufacturer's data sheet for recommended pressure settings.
2. Podesite uzorak ventilatora: The spray gun allows for adjustment of the fan pattern. Consult the gun's specific controls for widening or narrowing the spray.
3. Test sprej: Before applying to the final surface, perform a test spray on a scrap piece of material to verify the spray pattern, atomization, and fluid output. Adjust settings as necessary.
4. primjena: Maintain a consistent distance and speed while spraying to ensure an even coating. Overlap each pass by approximately 50% for uniform coverage.
5. Kontrola okidača: Engage the trigger fully for consistent spray. Release the trigger at the end of each pass to avoid excessive material buildup.

6. Održavanje i čišćenje

Jedan od ključnih advan-atages of the 3M Performance Spray Gun system is its simplified cleaning process, as paint does not pass through the gun body.

1. Isključite dovod zraka: Always disconnect the air supply from the spray gun before cleaning or disassembling.
2. Remove PPS Cup System: Detach the PPS Series 2.0 Cup system from the spray gun body.
3. Dispose of Liner and Lid: Remove the disposable liner and lid containing any remaining coating material. Dispose of these components according to local environmental regulations.
4. Uklonite glavu za raspršivanje: Unscrew the locking collar and remove the atomizing head.
5. Clean Atomizing Head: The atomizing head can be cleaned with appropriate solvent or cleaning solution. Ensure all paint residue is removed from the nozzles and air passages. Allow to dry completely.
6. Clean Spray Gun Body: Wipe down the exterior of the spray gun body with a clean cloth dampened with solvent, if necessary. Since paint does not pass through the gun body, internal cleaning is generally not required.
7. Skladištenje: Store the spray gun and components in a clean, dry environment.

Note: The replaceable atomizing heads are designed for multiple uses, provided they are cleaned thoroughly after each use.

7. Otkrivanje problema

This section addresses common issues that may arise during the operation of the 3M Performance Spray Gun. For more complex problems, contact 3M technical support.

8. Specifikacije

9. Garancija i podrška

For information regarding product warranty, technical support, or service, please contact 3M directly through their official webweb-mjesto ili kanali korisničke podrške. Prilikom kontaktiranja podrške, obavezno imajte pri ruci broj modela proizvoda (26778) i detalje o kupovini.

Posjetite www.3M.com for further details and contact information.