1. Uvod
This manual provides detailed instructions for the installation, operation, and maintenance of your SEBSON Outdoor Motion Detector (Model: IR_OUT_BA). Please read this manual thoroughly before installation and use to ensure safe and correct operation. Keep this manual for future reference.
Slika 1.1: Prednja strana view of the SEBSON Outdoor Motion Detector.
2. Sigurnosna uputstva
Uvijek se pridržavajte sljedećih sigurnosnih mjera opreza kako biste spriječili ozljede ili oštećenje uređaja:
- električna sigurnost: Installation and maintenance should only be performed by a qualified electrician. Always disconnect the main power supply before any installation, wiring, or maintenance work.
- Voltage: Osigurajte radnu voltage of 230V AC matches your electrical supply.
- IP44 ocjena: This device is rated IP44, meaning it is protected against solid objects larger than 1mm and splashing water from any direction. It is suitable for outdoor use but must not be submerged in water.
- Montaža: Mount the device securely on a stable surface. Do not install near flammable materials or heat sources.
- djeca: Držite materijale za pakovanje i male dijelove dalje od djece.
3. Sadržaj paketa
Paket uključuje:
- 1x SEBSON Outdoor Motion Detector (Model: IR_OUT_BA)
4. Proizvod je gotovview i karakteristike
The SEBSON Outdoor Motion Detector is designed for reliable motion detection in outdoor environments. Key features include:
- Raspon detekcije: Up to 12 meters with a 180° infrared sensor.
- Podesiva glava senzora: Can be swiveled vertically by 300° for precise area coverage.
- Adjustable Illumination Duration (TIME): From 10 seconds to 7 minutes.
- Adjustable Ambient Brightness (LUX): Operates between 3 and 2000 lux, allowing for day and night operation settings.
- LED kompatibilan: Podržava LED lamps and other energy-saving bulbs up to 300W, and incandescent bulbs up to 1200W.
- Izdržljiv dizajn: IP44 rated for outdoor use, anthracite color, made of plastic.
Slika 4.1: Gotovoview of key product features: 12m/180° detection, up to 300W LED, IP44 rating, 10 sec - 7 min duration, 3-2000 LUX sensitivity, 230V operation.
Image 4.2: Dimensions of the motion detector (96mm x 86mm x 60mm) and its 300° vertical swiveling capability.
5. Postavljanje i instalacija
Slijedite ove korake za pravilnu instalaciju:
- Pripremite se za instalaciju: Prije početka rada, provjerite je li glavni dovod struje u područje instalacije isključen prekidačem.
- Odaberite lokaciju za montažu: Select a suitable outdoor wall for surface mounting. Consider the desired detection area and avoid locations directly exposed to strong sunlight, heat sources (e.g., vents), or rapidly changing temperatures, which can cause false triggers. The recommended mounting height is 1.8m - 2.5m.
- Montaža baze:
- Carefully open the motion detector housing.
- Use the base of the detector as a template to mark the drilling points on the wall.
- Izbušite rupe na označenim mjestima. Po potrebi umetnite odgovarajuće tiple.
- Secure the detector's base firmly to the wall using screws.
- Ožičenje: Connect the electrical wires to the terminal block inside the detector. This device requires a 3-wire connection.
- Connect the Live wire (L) from the power supply.
- Connect the Neutral wire (N) from the power supply.
- Connect the Switched Live wire (L') to your light fixture.
Slika 5.1: Primjerample wiring diagram. Ensure correct Live (L), Neutral (N), and Switched Live (L') connections.
- Zatvori smještaj: Carefully close the detector housing, ensuring no wires are pinched.
- Vrati snagu: Once installation is complete and all connections are secure, restore the main power supply.
Image 5.2: The motion detector installed on an exterior wall, demonstrating typical placement.
6. Upute za upotrebu i podešavanja
The motion detector features two adjustable dials for customizing its operation:
Slika 6.1: Krupni plan view of the 'TIME' and 'LUX' adjustment dials on the motion detector.
6.1. TIME Adjustment (Illumination Duration)
The 'TIME' dial controls how long the connected light remains on after motion is detected and no further motion is sensed. The duration can be set from approximately 10 seconds to 7 minutes.
- Turn the dial clockwise (+) for a longer illumination duration.
- Turn the dial counter-clockwise (-) for a shorter illumination duration.
6.2. LUX Adjustment (Ambient Brightness Sensitivity)
The 'LUX' dial determines the ambient light level at which the motion detector will activate. It can be set from 3 lux (dark) to 2000 lux (daylight).
- Okrenite brojčanik prema sun icon for activation in brighter conditions (e.g., during the day).
- Okrenite brojčanik prema moon icon for activation only in darker conditions (e.g., at night).
6.3. Adjusting the Sensor Head
The sensor head can be manually swiveled vertically by 300° to fine-tune the detection area. Adjust it to cover the desired zone and avoid areas where unwanted triggers might occur (e.g., public pathways, moving foliage).
Image 6.2: Diagram illustrating the 180° detection range up to 12 meters and the function of TIME and LUX adjustment dials.
7. Održavanje
To ensure optimal performance and longevity of your motion detector:
- čišćenje: Regularly clean the sensor lens and the outer casing s mekim, suhim ili blago damp cloth. Do not use abrasive cleaners, solvents, or harsh chemicals, as these can damage the surface or the sensor.
- inspekcija: Periodically check the mounting screws for tightness and ensure the housing remains securely closed. Inspect the wiring for any signs of wear or damage.
- Faktori okoline: Keep the detection area clear of obstructions like growing plants or debris that could interfere with the sensor's operation.
8. Otkrivanje problema
If you encounter issues with your motion detector, refer to the following common problems and solutions:
| Problem | Mogući uzrok | Rješenje |
|---|---|---|
| Svjetlo se ne pali kada se detektuje pokret. |
|
|
| Light stays on continuously or turns on randomly. |
|
|
| Detection range is poor or inconsistent. |
|
|
If the problem persists after attempting these solutions, please contact SEBSON customer support.
9. Specifikacije
| Feature | Specifikacija |
|---|---|
| Proizvođač | SEBSON |
| Broj modela | IR_OUT_BA |
| Dimenzije proizvoda (D x Š x V) | 8.6 x 6 x 9.6 cm |
| Težina | 155 grama |
| Boja | Antracit |
| Materijal | Plastika |
| Izvor napajanja | AC |
| Voltage | 230 Volts |
| Max. Power (LED) | 300 Watts |
| Max. Power (Incandescent) | 1200 Watts |
| Metoda instalacije | Zidna montaža (površinska montaža) |
| Kompatibilnost tipova sijalica | LED |
| Domet detekcije | 12m / 180° |
| Swiveling Angle | 300° (vertical) |
| Illumination Duration (TIME) | 10 sekundi - 7 minuta |
| Ambient Brightness (LUX) | 3 - 2000 luksa |
| IP Rating | IP44 |
| Preporučena upotreba | Na otvorenom |
| Gornja nazivna temperatura | 40 stepeni Celzijusa |
| Zemlja porijekla | Kina |
10. Garancija i podrška
Politika povrata: This product is eligible for returns within 30 days of purchase, in accordance with the retailer's return policy.
Korisnička podrška: For technical assistance, troubleshooting, or any questions regarding your SEBSON motion detector, please contact SEBSON customer service directly through your purchase platform. Our team is dedicated to providing support and ensuring product quality.
