FBT SIMPHOENIX E550-2S0055L VFD Frequency Inverter User Manual

1. Uvod

This manual provides essential information for the safe and efficient operation of the FBT SIMPHOENIX E550-2S0055L Variable Frequency Drive (VFD). This VFD is designed for precise motor control in applications such as CNC routers, terminal machines, wire-cutting machines, and dividing/cutting machines. It offers advanced features including Sensorless Vector Control (SVC), V/F control, and high adaptability to grid voltage fluctuations (enduring ±20% fluctuation).

2. Sigurnosne informacije

UPOZORENJE: Failure to follow these safety instructions may result in serious injury or equipment damage.

• Refer to the instruction manual thoroughly before installation and operation.
• Do not connect AC power to the output terminals (UVW). This is for motor connection only.
• Do not remove any cover while applying power. Wait at least 10 minutes after disconnecting power before accessing internal components to allow capacitors to discharge.
• Securely ground (earth) the equipment to prevent electrical shock.

3. Proizvod je gotovview

The FBT SIMPHOENIX E550-2S0055L VFD features a user-friendly control panel for easy configuration and monitoring.

Slika 3.1: Prednja strana view of the FBT SIMPHOENIX E550-2S0055L VFD, showing the digital display, control buttons, and potentiometer.

3.1 Karakteristike kontrolne table

• Digitalni prikaz: A 4-digit LED display shows operational parameters such as frequency (Hz), voltage (V), and current (A). Indicators for RUN status are also present.
• Potenciometar: A rotary knob labeled MIN/MAX for adjusting frequency or other parameters.
• ESC dugme: Koristi se za izlazak iz menija ili otkazivanje operacija.
• Dugme SET: Used to enter menus or confirm settings.
• Smjerni gumbi (gore/dolje/lijevo/desno): Used for navigation within menus and adjusting parameter values.
• Dugme RUN/STOP: Pokreće ili zaustavlja rad motora.

4. Postavljanje i instalacija

4.1 Električne veze

1. Ulazna snaga: Connect the 220V AC power supply to the designated input terminals. Ensure the power source matches the VFD's voltage zahtjeve.
2. Izlaz motora: Connect the motor to the UVW output terminals. Do not connect AC power to these terminals.
3. uzemljenje: Ensure the VFD is securely grounded (earthed) to a proper ground point.
4. Kontrolno ožičenje: Utilize the multifunctional input terminals for external control signals. The VFD supports 29 kinds of terminal function definitions and 16 kinds of programmable status outputs for flexible control.

4.2 Komunikacijski interfejs

The VFD includes a standard RS485 communication interface. It supports the MODBUS protocol and Simphoenix self-defined protocols, allowing for easy integration with PLCs or other industrial control equipment.

5. Uputstvo za upotrebu

5.1 Osnovni rad

1. Uključeno: Apply power to the VFD. The digital display will illuminate.
2. Podešavanje parametara: Use the SET button to enter the parameter menu. Navigate with the directional buttons and adjust values using the potentiometer or directional buttons. Press SET to confirm and ESC to exit.
3. Pokretanje motora: Pritisnite RUN button to start the motor. The RUN indicator will light up.
4. Podesite frekvenciju: While the motor is running, the potentiometer can be used to adjust the output frequency, thereby controlling motor speed.
5. Zaustavi motor: Pritisnite STOP button to halt the motor.

5.2 Napredne funkcije

• Praćenje u realnom vremenu: The VFD provides vivid real-time monitoring of input and output current, voltage, and other operational parameters directly on the display.
• Self-Adaptive Control: Features special self-adaptive control technology for automatic current-limiting, voltage-limiting, and under-voltage suppression during operation.
• Built-in Counter: A built-in counter function allows for simple counting operations when matched with multifunctional terminals.
• PID Controller: An integrated and optimized PID controller facilitates closed-loop control over variables like temperature, simplifying control system structures and reducing costs.

6. Održavanje

Redovno održavanje osigurava dugotrajnost i pouzdan rad vašeg VFD-a.

• čišćenje: Keep the VFD clean and free from dust and debris. Use a soft, dry cloth for cleaning. Do not use liquid cleaners.
• inspekcija: Periodically inspect all electrical connections for tightness and signs of wear or damage.
• hlađenje: Ensure adequate ventilation around the VFD to prevent overheating. Keep cooling fins clear.
• Isključivanje struje: Always disconnect power and wait at least 10 minutes before performing any maintenance or inspection that requires opening the VFD cover.

7. Otkrivanje problema

Ovaj odjeljak pruža općenite smjernice za uobičajene probleme. Za složene probleme obratite se tehničkoj podršci.

• VFD Not Powering On:
  • Check the main power supply connection.
  • Provjeri unos voltage (220 V).
  • Inspect fuses or circuit breakers.
• Motor ne radi:
  • Ensure the RUN button has been pressed.
  • Check motor wiring to UVW terminals.
  • Verify motor parameters are correctly set in the VFD.
  • Check for any error codes on the display and consult the full manual for their meaning.
• Nenormalna buka ili vibracija:
  • Check motor mounting and alignment.
  • Verify motor parameters and VFD settings.
  • Ensure the motor is suitable for VFD operation.

8. Specifikacije

9. Garancija i podrška

For warranty information, technical support, or service inquiries, please contact your vendor or the manufacturer directly. Keep your purchase receipt for warranty claims.

You can visit the FBT Store for more products and information: FBT Store on Amazon