FBT VS500 Series Engraving Machine Inverter User Manual

1. Uvod

The FBT VS500 Series Inverter is a dedicated frequency inverter designed for engraving machines and other industrial applications requiring precise motor control. Known for its superior cost-efficiency, the VS500 series is widely applied in machine tools, electricity, textile, transportation, transmission, paper, cable, and metallurgy industries. This manual provides essential information for the safe and effective installation, operation, and maintenance of your VS500 inverter.

2. Značajke proizvoda

The VS500 series inverter incorporates advanced technology to deliver reliable and efficient performance. Key features include:

• Kompaktan dizajn: Features a compact yet reasonable structure, reducing the inverter's volume by 20%-30% compared to traditional general inverters. It includes an independent cooling duct and a closed main loop design for enhanced durability.
• Napredno hlađenje: Utilizes a DC fan characterized by large volume, high wind pressure, excellent cooling effect, and stable performance, ensuring optimal operating temperatures.
• Droop Control Function: Automatically balances the power of drive systems for inverters on the same transmission chain, improving system stability and efficiency.
• Self-Adaptive Control Technology: Allows for automatic current and voltage limitation, as well as under-voltage suppression during operation, protecting the equipment and ensuring stable performance.
• Komunikacijski interfejs: Equipped with a standard RS485 communication interface and supports optional MODBUS protocol and SUNFAR self-defined protocol. This enables linkage synchronous control, facilitating easy communication with PLCs, industrial personal computers, and other industrial equipment.
• Load Auto-Balancing: When RS485 communication linkage control is adopted, the master motor synchronously sends frequency and torque load commands to each slave motor, achieving precise torque balancing across the variable frequency drive system.

3. Postavljanje i instalacija

3.1. Raspakivanje i pregled

Upon receiving your VS500 inverter, carefully unpack it and inspect for any signs of damage during transit. Verify that all components listed in the packing list are present. If any damage or missing parts are found, contact your supplier immediately.

3.2. Montaža

Mount the inverter vertically on a flat, non-flammable surface in a well-ventilated area. Ensure sufficient clearance around the unit for proper airflow and heat dissipation. Avoid mounting in direct sunlight, high humidity, or dusty environments.

3.3. Ožičenje

All wiring must be performed by qualified personnel in accordance with local and national electrical codes. Ensure power is disconnected before making any connections.

1. Ulazna snaga (R, S, T): Connect the 380V AC power supply to the R, S, T terminals.
2. Izlazna snaga motora (U, V, W): Connect the motor leads to the U, V, W terminals. Ensure correct phase sequence for desired motor rotation.
3. uzemljenje: Connect the ground terminal (PE) to a reliable earth ground. This is crucial for safety and proper operation.
4. Kontrolni terminali: Connect external control signals (e.g., start/stop, speed reference, emergency stop) to the designated control terminals as per your application requirements. Refer to the detailed wiring diagram in the full product manual for specific terminal assignments.

Napomena: Incorrect wiring can lead to equipment damage or personal injury. Always double-check all connections before applying power.

This image displays two models of the FBT VS500 Series engraving machine inverters. The larger unit is on the left, and a slightly smaller unit is on the right. Both inverters are dark gray with a prominent red LED digital display showing numerical values, likely frequency and output. Below the display, there is a control panel with various buttons for functions like ESC, SET, REV, FWD, STOP, and a rotary knob for parameter adjustment. A yellow warning label is visible on the lower front of both units, indicating important safety instructions.

4. Uputstvo za upotrebu

4.1. Control Panel Overview

The VS500 inverter features an intuitive control panel for easy operation and parameter setting. The panel typically includes:

• Digitalni prikaz: Shows operating frequency, output current, voltage, and various parameter values.
• ESC dugme: Koristi se za izlazak iz menija ili otkazivanje operacija.
• Dugme SET: Used to enter parameter setting mode or confirm selections.
• Dugmad za NAZAD/NAPRIJED: Used for changing motor rotation direction (Reverse/Forward).
• Dugme STOP: Used to stop the motor.
• Okretno dugme: Used for adjusting frequency, navigating menus, and changing parameter values.

4.2. Osnovni rad

1. Uključeno: After ensuring all connections are secure, apply power to the inverter. The digital display will illuminate.
2. Pokretanje motora: Pritisnite FWD button to start the motor in the forward direction, or REV for reverse.
3. Podesite frekvenciju/brzinu: Rotirajte dugme to increase or decrease the output frequency, thereby adjusting the motor speed.
4. Zaustavi motor: Pritisnite STOP button to bring the motor to a halt.
5. Postavka parametara: Pritisnite SET button to enter the parameter setting menu. Use the knob to navigate and adjust parameters. Press SET again to confirm changes and ESC za izlaz.

Napomena: For detailed parameter settings and advanced functions, refer to the comprehensive programming guide in the full product manual.

5. Održavanje

Regular maintenance ensures the longevity and optimal performance of your VS500 inverter.

• čišćenje: Periodically clean the inverter's exterior and cooling fins to prevent dust accumulation, which can hinder heat dissipation. Use a soft, dry cloth. Do not use liquid cleaners.
• Inspekcija ventilatora: Check the cooling fan for proper operation and ensure it is free from obstructions. Replace the fan if it becomes noisy or stops working.
• Zategnutost terminala: Annually check all electrical connections for tightness. Loose connections can cause overheating and intermittent operation.
• Uslovi okoline: Ensure the operating environment remains within specified temperature and humidity ranges. Avoid exposure to corrosive gases or excessive vibration.
• Vijek trajanja kondenzatora: Electrolytic capacitors have a finite lifespan. Consider professional inspection and replacement after several years of continuous operation, especially in high-temperature environments.

6. Otkrivanje problema

This section provides solutions to common issues you might encounter with your VS500 inverter. For more complex problems, consult the full product manual or contact technical support.

7. Tehničke specifikacije

Below are the general specifications for the FBT VS500 Series Inverter, model VS500-4T0022G/4T0037P:

• Brand: FBT
• Model: VS500-4T0022G/4T0037P
• Ulazni voltage: 380 V AC
• Output Voltage: 380 V AC
• Snaga: 2.2 KW
• Broj dijela: VS500-4T0022G/4T0037P
• ASIN: B08QW3ZGDZ
• Prvo dostupno: 17. decembar 2020

8. Garancija i podrška

FBT products are manufactured to high-quality standards. For specific warranty terms and conditions, please refer to the warranty card included with your product or contact FBT customer support directly. In case of technical issues or inquiries not covered in this manual, please reach out to your authorized FBT dealer or the manufacturer's customer service for assistance.

Za dodatne informacije ili podršku, posjetite FBT Store on Amazon.