1. Uvod
This manual provides essential instructions for the proper installation, operation, and maintenance of your PROFLO PF73ASDP Anti-Siphon Sillcock. This device is designed to provide outdoor water access while preventing backflow and offering frost protection. Please read all instructions carefully before installation and use.
Important Note: This sillcock is specifically designed for non-potable use only. Do not connect to drinking water supplies or use for purposes requiring potable water.
2. Sigurnosne informacije
- Non-Potable Use: This product is not intended for use with potable (drinking) water. Ensure it is connected only to non-potable water lines.
- Profesionalna instalacija: Installation should be performed by a qualified plumber or a person with adequate plumbing knowledge to ensure compliance with local codes and proper function.
- Pritisak vode: Ensure the water pressure in your system is within acceptable limits for plumbing fixtures.
- Provjere curenja: Nakon instalacije, pažljivo provjerite sve spojeve na curenje.
- Zimljenje: Proper winterization is crucial to prevent freezing and damage, even with frost-proof designs.
3. Komponente
The PROFLO PF73ASDP Anti-Siphon Sillcock consists of the following primary components:
- Sillcock Body: The main structure, typically bronze, housing the valve mechanism.
- Ulazni priključak: The end designed to connect to the internal water supply (1/2 inch).
- Outlet Spout: The external threaded connection for attaching hoses or other accessories.
- Ručni točak: The multi-turn handle used to control water flow.
- Anti-Siphon Vacuum Breaker: An integrated mechanism to prevent backflow contamination.
- Operativni štap: Extends from the handwheel to the valve seat inside the building wall.
Slika 1: PROFLO PF73ASDP Anti-Siphon Sillcock. This image displays the complete sillcock unit, showing the bronze body, the multi-turn handwheel at the top, the anti-siphon cap, the 1/2-inch inlet pipe extending downwards, and the threaded hose connection at the side.
4. Instalacija
Follow these general steps for installing the PROFLO PF73ASDP Sillcock. Consult local plumbing codes and a professional plumber for specific requirements.
- Odaberite lokaciju: Choose an exterior wall location that allows for easy access to an internal non-potable water supply line. Ensure there is sufficient space for the sillcock's length (4 inches from the wall to the valve seat).
- Pripremite otvaranje: Drill an appropriate size hole through the exterior wall, ensuring a slight downward slope towards the outside. This slope is critical for proper drainage and frost protection.
- Priključak na vodovod: Connect the 1/2-inch inlet of the sillcock to the internal non-potable water supply line. Use appropriate plumbing fittings and sealants to ensure a watertight connection.
- Mount Sillcock: Insert the sillcock through the prepared hole. Secure the sillcock flange to the exterior wall using appropriate fasteners. Ensure the sillcock is firmly mounted and the downward slope is maintained.
- Test na curenje: Slowly turn on the water supply to the sillcock. Inspect all connections, both internal and external, for any signs of leaks. Address any leaks immediately.
5. Operacija
Operating your PROFLO PF73ASDP Sillcock is straightforward:
- Za otvaranje: Turn the handwheel counter-clockwise to open the valve and allow water to flow from the spout. The multi-turn design allows for precise control of water flow.
- Zatvoriti: Turn the handwheel clockwise until it is firmly closed. Do not overtighten.
- Anti-Siphon Function: The integrated anti-siphon vacuum breaker prevents contaminated water from flowing back into your non-potable water supply, protecting against potential hazards.
- Dizajn otporan na mraz: When the sillcock is properly installed with a downward slope and the handwheel is fully closed, the valve seat is located inside the heated portion of the building. Any water remaining in the spout drains out, preventing freezing and potential damage to the sillcock.
6. Održavanje
Redovno održavanje osigurava dugotrajnost i pravilno funkcioniranje vaše slavine:
- Periodični pregled: Periodically check the sillcock for any signs of wear, leaks, or damage.
- Zimljenje: Before the first freeze, it is crucial to properly winterize the sillcock.
- Disconnect all hoses, splitters, or other attachments from the sillcock spout.
- Ensure the handwheel is fully closed.
- The frost-proof design will allow any water in the spout to drain out, preventing freezing. Do not leave hoses attached during freezing temperatures, as this can trap water and negate the frost-proof feature.
- čišćenje: Clean the exterior of the sillcock with a mild soap and water solution as needed. Avoid abrasive cleaners.
7. Otkrivanje problema
| Problem | Mogući uzrok | Rješenje |
|---|---|---|
| Nema protoka vode | Water supply turned off; handwheel not fully open; blockage. | Check internal water supply valve; turn handwheel counter-clockwise fully; inspect spout for obstructions. |
| Water dripping from spout when closed | Handwheel not fully closed; worn washer/seal; internal damage. | Ensure handwheel is fully closed (do not overtighten); if dripping persists, contact a plumber for inspection and repair. |
| Water leaking from anti-siphon cap | Normal operation during back-pressure events; damaged anti-siphon mechanism. | A small amount of water may discharge during pressure fluctuations. If continuous or excessive, the anti-siphon mechanism may need inspection by a plumber. |
| Sillcock freezes and bursts | Hose left attached during freezing temperatures; improper installation (no slope); extreme cold. | Always disconnect hoses before freezing weather. Ensure proper installation with a downward slope. In extreme cold, consider additional insulation. |
8. Specifikacije
- Model: PF73ASDP
- Veličina veze: 1/2 inch (inlet)
- dužina: 4 inches (from wall to valve seat)
- Materijal: Bronza
- Karakteristike: Multi-turn handwheel operation, Anti-siphon, Frost-proof design
- Namjena: Non-potable water only
- Dimenzije proizvoda: Approximately 1 x 1 x 1 inches (exterior body, excluding pipe length)
- Težina artikla: 1.04 funte
- Proizvođač: PROFLO
9. Garancija i podrška
For warranty information, technical support, or replacement parts, please contact PROFLO directly through their official webweb-mjesto ili kanale korisničke podrške. Sačuvajte račun kao dokaz o kupovini.
