ASD A-LFMOV-M32D45C-N-2p

ASD LED 32-inčna ovalna ugradbena svjetiljka - uputstvo za upotrebu

Model: A-LFMOV-M32D45C-N-2p

Marka: ASD

Uvod

Thank you for choosing the ASD LED 32 Inch Oval Flush Mount Light Fixture. This manual provides detailed instructions for the safe and efficient installation, operation, and maintenance of your new lighting fixture. Please read this manual thoroughly before beginning installation and retain it for future reference.

Sigurnosne informacije

UPOZORENJE: Risk of electric shock. Disconnect power at the fuse or circuit breaker before installing or servicing. All electrical connections must be in accordance with local and National Electrical Code (NEC) standards. If you are unfamiliar with proper electrical wiring connections, consult a qualified electrician.

This fixture is designed for use in dry and damp locations. Do not install in wet locations. Ensure all connections are secure and properly insulated. Do not exceed the specified voltagOpseg od 100-277V.

Karakteristike proizvoda

Diagram illustrating key features of the ASD LED light fixture including acrylic lens, multi-voltage operation, 3CCT, and dimming capabilities.

Figure 1: Key Features of the ASD LED Light Fixture.

Visual representation of 3000K Warm White, 4000K Cool White, and 5000K Daylight color temperature options.

Figure 2: 3CCT Color Temperature Options.

Uputstva za instalaciju

Potreban alat: Screwdriver, Wire Strippers, Drill (if anchors are needed).

Važno: Before starting installation, ensure the power supply to the fixture location is turned off at the circuit breaker or fuse box.

  1. Pripremite opremu: Odvrnite matice u smjeru suprotnom od kazaljke na satu i pažljivo uklonite metalni prsten i sočivo iz armature.
  2. Pričvrstite montažnu ploču: Attach the mounting plate to the outlet box using two screws. If necessary, use the mounting plate as a template to mark the location for wall anchors. Drill appropriate sized holes for anchors, insert anchors, and then secure the self-tapping screws into the anchors.
  3. Povežite ožičenje: Connect the electrical wires: Black to Black (Live), White to White (Neutral), and Ground to Ground (Bare Copper or Green). Secure connections with wire nuts. Carefully tuck all wires back into the outlet box.
  4. Secure Fixture & Select CCT: Feed the self-tapping screws through the keyhole slots on the fixture's back plate and tighten them to secure the fixture to the mounting plate. Before fully securing, locate the CCT switch on the fixture and choose your desired color temperature (3000K, 4000K, or 5000K). Once the CCT is selected, secure the lens and metal ring to the fixture pan using the cap nuts.
Step-by-step diagram showing the installation process of the flush mount light fixture, including removing the lens, attaching the mounting plate, wiring connections, and securing the fixture.

Figure 3: Installation Steps.

For a full cut sheet and detailed installation guide, please refer to the official PDF manual: ASD LED Flush Mount Manual (PDF)

Uputstvo za upotrebu

Once installed and powered, the light fixture can be operated using a standard wall switch. If a compatible Triac dimmer switch is installed, you can adjust the brightness from 10% to 100% by manipulating the dimmer control. The color temperature is set via a switch on the fixture itself during installation and cannot be changed without accessing the fixture.

Održavanje

The ASD LED Flush Mount Light Fixture requires minimal maintenance. To clean the fixture, ensure the power is off and allow it to cool. Wipe the exterior surfaces with a soft, dry or slightly damp krpom. Ne koristite abrazivna sredstva za čišćenje ili rastvarače, jer mogu oštetiti završnu obradu ili električne komponente.

Rješavanje problema

ProblemMogući uzrokRješenje
Svjetlo se ne pali.Nema napajanja.
Neispravno ožičenje.
Neispravan prekidač.
Provjerite prekidač/osigurač.
Provjerite spojeve ožičenja.
Testirajte ili zamijenite prekidač.
Svjetlo neočekivano treperi ili se prigušuje.Nekompatibilni prekidač za prigušivanje svjetla.
Slabo ožičenje.
Voltage fluktuacije.
Provjerite je li prigušivač kompatibilan s Triacom.
Provjerite i osigurajte sve ožičenje.
Verify stable power supply (100-277V).
Svjetlosni izlaz je prenizak/previsok.Podešavanje prigušivača.
Incorrect CCT selection.
Podesite prigušivač na željeni nivo.
Re-check CCT switch setting on fixture (requires re-accessing fixture).

Specifikacije

AtributDetalj
BrandASD
Naziv modelaLED dvostruki prsten za ugradnju
Broj modela stavkeA-LFMOV-M32D45C-N-2p
BojaBrushed Nickel (2pk)
MaterijalIzdržljivo kućište od legiranog čelika, abažur od matiranog akrila, mat bijeli poklopac difuzora, baza od punog metala
Dimenzije proizvoda32.44 cm D x 18.13 cm Š x 4.81 cm V
Vrsta izvora svjetlostiLED
Wattage45 vati
Osvetljenost3750 lumena
Light Color3000K/4000K/5000K (CCT Adjustable)
Voltage100-277 Volti
DimmableYes (Triac Dimming)
Average Life50,000 sata
CertifikacijaETL, Energy Star, cETL
Unutrašnja/vanjska upotrebaUnutra (Damp Locations Rated)
Težina artikla7.8 funti
Uključene komponenteLight Fixture, Mounting Plate, Screws, Anchors, Wire Nuts
Detailed product specification diagram showing dimensions (32-1/2 inches length, 18-1/8 inches width, 4-3/4 inches height), power (45W), CCT (3CCT), brightness (3750lm), and finish (Nickel).

Figure 4: Product Specification Diagram.

Garancija i podrška

This ASD LED Flush Mount Light Fixture is covered by a 5-godišnja garancija proizvođača. This warranty ensures quality, safety, and a positive user experience. For any questions, technical assistance, or warranty claims, please contact ASD customer support. Contact information can typically be found on the product packaging or the official ASD Lighting website.

Certifications and warranty information for ASD products, highlighting American company, exceptional customer service, ETL, Energy Star, and 5-year warranty.

Figure 5: Warranty and Certifications.

Primjena proizvoda Examples

Four images showing the ASD LED light fixture installed in various settings: a bedroom, a hallway, a family room, and a hospital reception area, demonstrating its versatility.

Figure 6: Versatile Applications of the Light Fixture.

Povezani dokumenti - A-LFMOV-M32D45C-N-2p

Preview ASD LED ugradbena svjetiljka bez okvira - Specifikacije proizvoda, vodič za instalaciju i naručivanje
Sveobuhvatni vodič za ASD LED ugradne svjetiljke bez okvira, koji obuhvata karakteristike proizvoda, detaljne specifikacije, uputstva za instalaciju i informacije o naručivanju. Karakteristike uključuju CCT vrijednost s mogućnošću odabira boje, visok CRI, IC i ocjene za vlažne lokacije, te dug vijek trajanja.
Preview ASD LED zidna svjetiljka | Moderan dizajn, odabir boje, prigušljiva rasvjeta
Istražite ASD LED zidnu svjetiljku (model serije ASD-LWS-11-D15CC) za modernu, energetski efikasnu rasvjetu. Ima CCT s mogućnošću odabira boje, TRIAC zatamnjivanje, vijek trajanja od 50,000 sati, ETL i Energy Star certifikate.
Preview ASD LED linearna visoka rasvjeta sa Q-bazom: Specifikacije i vodič za instalaciju
Sveobuhvatni vodič za ASD-ovu LED linearnu rasvjetu za visoke reflektore sa Q-bazom, koji detaljno opisuje specifikacije proizvoda, karakteristike, uputstva za instalaciju i informacije o naručivanju. Obuhvata energetsku efikasnost, odabir snage i temperature boje, opcije senzora pokreta i rezervno napajanje iz baterije.
Preview ASD LED okrugla ugradbena svjetiljka s razvodnom kutijom - Specifikacije proizvoda i vodič za instalaciju
Detaljne specifikacije, karakteristike i upute za instalaciju ASD LED okrugle ugradbene svjetiljke s razvodnom kutijom. Saznajte više o njenom dizajnu, energetskoj učinkovitosti, certifikatima i informacijama o naručivanju.
Preview ASD LED vanjska zidna svjetiljka: Moderna, Mogućnost odabira boje, Osvjetljenje fotoćelijama
Istražite ASD LED vanjsku zidnu svjetiljku, koja se odlikuje modernim dizajnom, prozirnim matiranim staklom, uglom snopa od 180° i triak zatamnjivanjem. Nudi CCT (3000K/4000K/5000K) koji se može odabrati u boji i ugrađenu fotoćeliju koja radi od sumraka do zore. Predviđena za vlažne lokacije, izdržljiva, sa vijekom trajanja od 50,000 sati i 5-godišnjom garancijom. ETL certificirana.
Preview ASD LED komplet za naknadnu ugradnju ugradne rasvjete: Mogućnost odabira boje, prigušivanje, energetski učinkovita rasvjeta
Otkrijte ASD LED Downlight Retrofit Kit, koji se odlikuje klasičnim dizajnom, 5CCT opcijama odabira boja, glatkim zatamnjivanjem i jednostavnom instalacijom. Idealan je za vlažne prostore, sa vijekom trajanja od 50,000 sati i UL certifikatom. Istražite specifikacije i informacije o naručivanju.