One For All Panasonic URC4914 Zamjenski daljinski upravljač za TV Korisnički priručnik

1. Uvod

This manual provides instructions for the One For All URC4914 Panasonic TV Replacement Remote Control. This remote is designed to function as a direct replacement for your original Panasonic TV remote, offering compatibility with various Panasonic TV types including LCD, LED, and Plasma models. It supports common Panasonic functions and includes a learning feature for customization.

2. Podešavanje

2.1. Instalacija baterije

Daljinski upravljač URC4914 zahtijeva dvije AA baterije (nisu uključene). Slijedite ove korake za njihovu instalaciju:

1. Pronađite poklopac odeljka za baterije na poleđini daljinskog upravljača.
2. Pomaknite poklopac prema dolje ili pritisnite zasun (ako postoji) da biste otvorili pretinac.
3. Umetnite dvije AA baterije, pazeći da pozitivni (+) i negativni (-) terminali budu pravilno poravnati s oznakama unutar odjeljka.
4. Vratite poklopac pretinca za baterije tako što ćete ga gurnuti nazad na mjesto dok ne klikne sigurno.

Slika 1: Pozadi view of the URC4914 remote control, illustrating the location of the battery compartment. The cover is typically located on the lower half of the remote's back side.

2.2. Početna upotreba

No setup is required for basic functionality. Once batteries are installed, the remote is ready to operate all compatible Panasonic televisions. Point the remote towards your TV and press the POWER button to test.

3. Uputstvo za upotrebu

The URC4914 remote control features a standard layout for Panasonic TVs. Below is an overview of key buttons and their functions.

Slika 2: Front view of the URC4914 remote control, displaying the full button layout for operation.

3.1. Funkcije gumba

• SNAGA: Uključuje ili isključuje TV.
• INPUT/TV/AV: Selects the input source (e.g., HDMI 1, AV, TV tuner).
• VIERA LINK: Activates Panasonic's Viera Link function for connected devices.
• VODIČ: Prikazuje elektronski programski vodič (EPG).
• APPS/NETFLIX/HOME: Provides quick access to smart TV applications, specifically Netflix, and the TV's home menu.
• Navigacijska tipka (gore, dolje, lijevo, desno, OK): Koristi se za navigaciju i odabir u meniju.
• EXIT/MENU/BACK: Exits menus, opens the main menu, or goes back to the previous screen.
• VOL +/-: Podešava nivo jačine zvuka.
• PR +/- (Channel +/-): Mijenja TV kanale.
• MUTE: Isključuje ili uključuje zvuk TV-a.
• Playback Controls (Play, Pause, Stop, Rewind, Fast Forward, Record): Controls media playback on compatible devices or TV functions.
• Numerička tastatura (0-9): Direct channel selection and data entry.
• INFO: Prikazuje informacije o trenutnom programu ili ulazu.

3.2. Learning Feature

The URC4914 remote includes a learning function, allowing you to copy functions directly from your original remote control. This is useful for any specific functions not pre-programmed or for customizing button assignments.

1. Place the URC4914 remote and your original remote on a flat surface, facing each other, approximately 1-2 inches apart.
2. Pritisnite i držite SETUP button (if present, or a combination like SHIFT + SETUP) on the URC4914 until the LED blinks twice and then stays lit.
3. Press the button on the URC4914 remote that you wish to program. The LED will blink rapidly.
4. Press and hold the corresponding button on your original remote. The URC4914's LED should blink twice to confirm successful learning.
5. Repeat for other buttons you wish to learn.
6. Da biste izašli iz načina učenja, pritisnite SETUP ponovo dugme.

Note: Specific steps for entering learning mode may vary. Refer to the full One For All manual for detailed instructions if the above does not apply.

4. Održavanje

4.1. Zamjena baterije

When the remote's performance degrades or it stops responding, it is likely time to replace the batteries. Always replace both AA batteries at the same time with new ones. Do not mix old and new batteries, or different types of batteries.

4.2. Čišćenje

To clean the remote control, use a soft, dry cloth. Do not use abrasive cleaners, solvents, or wet cloths, as these can damage the remote's surface or internal components.

5. Otkrivanje problema

• Daljinski ne reaguje:
  • Provjerite jesu li baterije pravilno umetnute s ispravnim polaritetom.
  • Zamijenite baterije svježim AA baterijama.
  • Ensure there are no obstructions between the remote and the TV's infrared sensor.
  • Provjerite da li se nalazite unutar efektivnog dometa IR prijemnika televizora.
• Određeni tasteri ne rade:
  • If you used the learning feature, try re-learning the function for that specific button.
  • Ensure your TV model supports the function you are trying to use.
• Remote works intermittently:
  • Ovo često ukazuje na slabu bateriju. Zamijenite baterije.
  • Ensure the remote's infrared emitter is clean and free from dust.

6. Specifikacije

7. Garancija i podrška

For warranty information or technical support regarding your One For All URC4914 remote control, please refer to the official One For All website or contact their customer service directly. Details are typically provided with the product packaging or on the manufacturer's website.