ANKO GFCI utičnica 20 Amp, Model 163, Uputstvo za upotrebu

1. Važne informacije o sigurnosti

UPOZORENJE: Electrical work can be hazardous. Always turn off power at the circuit breaker or fuse box before beginning any installation or maintenance. If you are unsure about any part of these instructions, consult a qualified electrician.

This ANKO GFCI outlet is UL Listed (YGB-095WR), ensuring compliance with safety standards.
The tamper-resistant design helps prevent accidental insertion of foreign objects into the receptacles.
The weather-resistant construction provides protection against corrosion, temperature extremes, and UV exposure, making it suitable for both indoor and outdoor applications.
The GFCI performs an automatic internal self-test every 40 seconds to confirm its ability to respond to a ground fault.
Always test the GFCI monthly to ensure proper function.

2. Proizvod je gotovview

A Ground Fault Circuit Interrupter (GFCI) is a safety device designed to protect against electrical shock. It monitors the electrical current flowing through a circuit and quickly trips (shuts off power) if it detects an imbalance, indicating a ground fault. This helps prevent serious injury.

Diagram explaining what a GFCI is and its LED indicators — **Slika 2.1:** Explanation of GFCI Function and LED Indicators. The green LED indicator light shows that the device is working properly. The red light will blink once every 40 seconds during self-test. If the GFCI is incapable of passing its internal test or detecting a fault, the red light will turn on.

Ključne karakteristike:

UL na listi: Certified for safety and quality.
20 Amp, 125 Volt, 60Hz: Standard electrical rating for various applications.
Tamper-Resistant (TR): Internal shutters prevent insertion of single objects into the receptacle openings.
Weather-Resistant (WR): Designed for durability in outdoor and indoor environments, resisting corrosion and UV degradation.
LED indikator: Provides visual status of the GFCI's operational state.
Automatsko samotestiranje: Performs a self-test every 40 seconds to ensure continuous ground fault protection.
Opcije ožičenja: Supports both back and side wire connections.

Image of the ANKO GFCI Outlet highlighting key features — **Slika 2.2:** ANKO GFCI Outlet with highlighted features. This image illustrates the key safety and functional attributes of the GFCI outlet, including its UL listing, tamper-resistant and weather-resistant properties, electrical ratings, LED indicator, self-test capability, and wiring options.

Sadržaj paketa:

1 x ANKO GFCI Outlet 20 Amp
1 x Decor Wall Plate
Montažni vijci

3. Specifikacije

Atribut	Vrijednost
Proizvođač	ANKO
Broj modela	163
Težina artikla	5.3 unce
Dimenzije proizvoda	4.2 x 1.8 x 1.6 inches (Outlet body)
Voltage	125 Volts
Amperage Capacity	20 Amps
Wattage	20 watts (Note: This likely refers to internal power consumption, not load capacity. Load capacity is 20A * 125V = 2500W)
Materijal	Copper (Internal components), Thermoplastic (Housing)
Metoda instalacije	Wall-Mounted
Certifikacija	UL Listed

Technical drawing displaying the dimensions of the ANKO GFCI Outlet and its included wall plate — **Slika 3.1:** ANKO GFCI Outlet and Wall Plate Dimensions. This image provides precise measurements for both the GFCI outlet body and the decorative wall plate, essential for proper installation and fit.

4. Podešavanje i instalacija

4.1 Kontrolna lista prije instalacije:

Isključite napajanje: Locate the circuit breaker or fuse that controls the outlet you are replacing or installing. Turn it OFF. Verify power is off using a voltage tester.
Identifikujte žice: In the electrical box, you will typically find:
- Hot Wire (Black or Red): Prenosi napajanje iz prekidača.
- Neutral Wire (White): Carries power back to the circuit breaker.
- Ground Wire (Green or Bare Copper): Provides a path for fault current.
Determine LINE and LOAD: It is crucial to correctly identify the LINE (incoming power from the breaker) and LOAD (power going to other outlets downstream) wires. Incorrect wiring can prevent the GFCI from functioning or providing protection to downstream outlets. If you are unsure, consult a qualified electrician.

4.2 Upute za ožičenje:

The ANKO GFCI outlet has clearly marked terminals for LINE and LOAD connections, as well as a grounding terminal. Refer to the diagrams below for proper wire connection.

Detailed wiring diagram of the ANKO GFCI Outlet terminals — **Slika 4.1:** GFCI Terminal Identification. This diagram shows the location of the LINE (LIGNE), LOAD (CHARGE), and GROUNDING (GND) terminals on the GFCI outlet, along with the corresponding wire colors (Hot/Noir, White/Blanc, Green/Bare Copper).

Povežite žicu za uzemljenje: Connect the bare copper or green insulated ground wire from the electrical box to the green grounding screw terminal on the GFCI.
Spojite LINE žice: Connect the incoming hot (black) wire to the brass screw terminal marked "LINE" and the incoming neutral (white) wire to the silver screw terminal marked "LINE". Do NOT connect LOAD wires to these terminals if you intend to protect downstream outlets.
Spojite žice za opterećenje (opciono): If you want to provide GFCI protection to other outlets or devices downstream on the same circuit, connect the outgoing hot (black) wire to the brass screw terminal marked "LOAD" and the outgoing neutral (white) wire to the silver screw terminal marked "LOAD". If no downstream protection is needed, cap off the LOAD terminals with electrical tape.
Sigurne veze: Ensure all wire connections are tight. Wires can be connected by wrapping them around the screw terminals or by using the back-wire clamps (push-in and tighten screw). For back-wiring, strip wires approximately 0.6 inches (15mm).
Mount the GFCI: Carefully fold the wires into the electrical box and secure the GFCI outlet to the box using the provided screws.
Instalirajte zidnu ploču: Attach the decorative wall plate over the GFCI outlet.

Illustrations demonstrating two common wiring scenarios for the ANKO GFCI Outlet — **Slika 4.2:** GFCI Wiring Diagrams. This image provides visual guidance for wiring the GFCI outlet in both single-cable and two-cable configurations, detailing connections for LINE, LOAD, and Ground, and illustrating back-wire and side-wire methods.

4.3 Post-Installation Test:

Vrati snagu: Ponovo uključite napajanje na prekidaču ili kutiji s osiguračima.
Press RESET: The green LED indicator should illuminate, indicating the GFCI is powered and ready. If not, press the RESET button.
Press TEST: Press the TEST button. The GFCI should trip, and the green LED should turn off (or a red LED may illuminate, depending on the model's specific indicator behavior for a tripped state).
Press RESET Again: Press the RESET button. The GFCI should reset, and the green LED should illuminate again.
If the GFCI does not reset or trip as described, check your wiring and ensure all connections are secure. If the issue persists, consult a qualified electrician.

5. Uputstvo za upotrebu

The ANKO GFCI outlet is designed for simple operation with its TEST and RESET buttons and an LED indicator for status feedback.

Dugme RESET: Nakon instalacije ili nestanka strujetage, press this button to restore power to the GFCI and any protected downstream outlets. The green LED should light up.
TEST dugme: Press this button to simulate a ground fault and verify the GFCI's tripping function. The GFCI should trip, and power to the receptacles will be cut.
LED indikator:
- Zeleno svjetlo UKLJUČENO: The GFCI is functioning correctly and providing power.
- Crveno svjetlo UKLJUČENO: The GFCI has detected a fault, is tripped, or has reached its end-of-life and needs replacement.
- bez svjetla: The GFCI is not receiving power or is tripped and has not been reset.
Automatsko samotestiranje: The GFCI automatically performs a self-test every 40 seconds. During this test, the red light will blink once. This is normal operation.

6. Održavanje

Regular maintenance ensures the continued safety and proper function of your GFCI outlet.

Mjesečno testiranje: Perform the post-installation test procedure (Section 4.3) at least once a month to confirm the GFCI is operating correctly.
čišćenje: Clean the GFCI outlet and wall plate with a soft, damp krpu. Ne koristite abrazivna sredstva za čišćenje ili rastvarače. Prije čišćenja provjerite da li je napajanje isključeno.
inspekcija: Periodically inspect the GFCI and wall plate for any signs of damage, cracks, or discoloration. Replace if damage is observed.

7. Otkrivanje problema

If your ANKO GFCI outlet is not functioning as expected, refer to the following troubleshooting guide:

Problem	Mogući uzrok	Rješenje
GFCI will not reset (no power, no green LED).	Nema napajanja u strujnom kolu. GFCI is incorrectly wired (LINE and LOAD terminals reversed). A ground fault exists in the circuit or connected appliance. GFCI is damaged or at end-of-life.	Check the circuit breaker; ensure it is ON. Turn off power, verify LINE and LOAD connections are correct (LINE from breaker, LOAD to downstream outlets). Unplug all appliances from the GFCI and any downstream outlets. Try to reset. If it resets, plug in appliances one by one to identify the faulty one. If none of the above resolve the issue, replace the GFCI.
GFCI se često isključuje.	A persistent ground fault in an appliance or wiring. Preopterećenje na strujnom kolu.	Identify and remove the faulty appliance. Inspect wiring for damage. Reduce the number of devices connected to the circuit.
Red LED is continuously ON.	GFCI has tripped due to a ground fault. GFCI has reached its end-of-life.	Press the RESET button. If it doesn't reset, troubleshoot for ground faults as above. If the GFCI trips and the red light stays on, and it cannot be reset after troubleshooting for ground faults, the unit may be at its end-of-life and requires replacement.

8. Informacije o garanciji

ANKO products are manufactured to high-quality standards. For specific warranty details regarding your ANKO GFCI Outlet Model 163, please refer to the warranty documentation included with your purchase or contact ANKO customer support directly.

9. Podrška

If you require further assistance or have questions not covered in this manual, please contact ANKO customer support. Contact information can typically be found on the product packaging or the manufacturer's official website.

	Anko Bluetooth vodootporni šareni plutajući zvučnik - korisnički vodič Korisnički priručnik za Anko Bluetooth vodootporni šareni plutajući zvučnik (model 43206056), s detaljnim specifikacijama, uputama za upotrebu, funkcijama tipki i važnim sigurnosnim mjerama opreza.
	Anko vodootporni zvučnik patka Korisnički priručnik Korisnički priručnik za Anko vodootporni zvučnik u obliku patke (Model: EBS-24106), u kojem su detaljno opisane njegove karakteristike, rad, specifikacije i informacije o garanciji.
	Anko Collapsible Bath Instruction Manual Instruction manual for the Anko Collapsible Bath, including assembly, disassembly, user information, and important safety warnings for use with infants and children. Features a heat indicator and details for Kmart Australia and New Zealand.
	Anko Kids Bluetooth Headphones Operating Instructions Detailed operating instructions and specifications for Anko Kids Bluetooth Headphones, models 43-001-149, 43-001-156, and 43-001-163. Covers pairing, functions, charging, and safety information.
	Upute za upotrebu Anko dječjih Bluetooth slušalica Sveobuhvatno uputstvo za upotrebu Anko dječjih Bluetooth slušalica (modeli 43-001-149, 43-001-156, 43-001-163) proizvođača Kmart, koje pokriva garanciju, podešavanje, uparivanje, upotrebu i specifikacije.
	Anko RH1302 2 Amp Uputstvo za upotrebu punjača baterija Comprehensive instruction manual for the Anko RH1302 2 Amp Battery Charger, covering safety warnings, operating instructions, LED meter explanation, charging procedures, overload protection, low maintenance battery charging, safety information, and warranty details.

ANKO 163

ANKO GFCI utičnica 20 Amp Uputstvo za upotrebu