Retekess TD018

Retekess TD018 Call Button Pager

Uputstvo za upotrebu

1. Uvod

The Retekess TD018 is a wireless call button pager designed to enhance service efficiency in various settings such as restaurants, clubs, bars, and hospitals. It features five main functions: RFID, Order, Call, Pay, and Cancel, catering to diverse customer needs. Constructed from durable PC material, this device is built for robust use. It operates on 4 x 1.5V AAA batteries (replaceable) and is compatible with Retekess watch and host display receivers.

Retekess TD018 Call Button Pager with a hand pressing the call button

Figure 1: Retekess TD018 Call Button Pager in use, showing a hand interacting with the call button.

2. Podešavanje

2.1 Instalacija baterije

  1. Locate the battery compartment on the underside of the TD018 pager.
  2. Otvorite poklopac odeljka za baterije.
  3. Umetnite 4 x 1.5 V AAA baterije, pazeći na ispravan polaritet (+/-).
  4. Čvrsto zatvorite poklopac odeljka za baterije.
Underside of Retekess TD018 showing battery compartment and four AAA batteries

Figure 2: The battery compartment on the underside of the TD018, with AAA batteries shown for installation.

2.2 Inserting the Advertising Card

  1. Gently slide the clear acrylic display panel upwards to remove it from the base.
  2. Insert your desired advertising or instruction card into the slot.
  3. Slide the clear acrylic display panel back into the base until it is securely seated.
Retekess TD018 with the advertising card being changed

Figure 3: Illustration of how to change the advertising card in the TD018 pager.

2.3 Pairing with Receivers

The TD018 call button is compatible with various Retekess watch and host display receivers. Refer to the specific receiver's instruction manual for detailed pairing procedures. Ensure the TD018 is powered on before attempting to pair.

Diagram showing Retekess TD018 compatibility with TD124 and T114 receivers

Figure 4: The TD018 pager can be used in combination with other Retekess receivers like the TD124 and T114 for full RFID functionality.

3. Uputstvo za upotrebu

The TD018 features five distinct function buttons, each designed for a specific service request:

Retekess TD018 showing labeled buttons for RFID, Order, Call, Pay, and Cancel functions

Figure 5: The five main function buttons of the TD018 pager are clearly labeled for user interaction.

  • RFID: This function is activated when used in combination with a compatible Retekess TD124 receiver. It allows for RFID card interaction.
  • Narudžba: Press this button to request a staff member to take an order.
  • nazovite: Press this button to call for general service or assistance.
  • Pay: Press this button to request the bill or to make a payment.
  • Otkaži: Press this button to cancel a previous service request.

When a button is pressed, the TD018 sends a wireless signal to the paired receiver, alerting staff to the specific service request from that location.

4. Održavanje

4.1 Zamjena baterije

The TD018 uses 4 x 1.5V AAA batteries. When the device's performance degrades or it stops responding, replace all four batteries simultaneously following the instructions in Section 2.1. Using fresh batteries ensures optimal performance and signal strength.

4.2 Čišćenje

To clean the TD018, use a soft, dry cloth. For stubborn dirt, a slightly damp cloth with mild soap can be used, ensuring no liquid enters the device. Avoid using abrasive cleaners or solvents, as these can damage the PC material and electronic components.

4.3 Trajnost

The TD018 is constructed with PC material for enhanced durability in commercial environments. While designed to be robust, avoid dropping the device or exposing it to excessive force or extreme temperatures.

5. Otkrivanje problema

  • Uređaj ne reaguje: Provjerite jesu li baterije pravilno instalirane i dovoljno napunjene. Po potrebi zamijenite baterije.
  • Receiver not receiving signals: Ensure the TD018 is within the operational range of the receiver. Verify that both the TD018 and the receiver are powered on and correctly paired. Obstructions like thick walls or metal structures can interfere with the wireless signal.
  • Povremeni signal: This could be due to low battery power in the TD018 or interference from other wireless devices. Try replacing batteries or relocating the device/receiver to minimize interference.

6. Specifikacije

FeatureDetalj
Broj modelaF9603B
Dimenzije proizvoda5.12 x 2.76 x 7.48 inča (130 mm x 70 mm x 190 mm)
Težina artikla8.5 unci (241 g)
MaterijalPC materijal
Napajanje4 x 1.5V AAA baterije (uključene)
Glavne funkcijeRFID, Order, Call, Pay, Cancel
KompatibilnostRetekess watch and host display receivers (e.g., TD124, T114)
Retekess TD018 with dimensions labeled: 130mm width, 70mm depth, 190mm height

Figure 6: Physical dimensions of the Retekess TD018 Call Button Pager.

7. Garancija i podrška

Za informacije o garanciji ili tehničku podršku, molimo vas da se obratite službenom Retekess servisu. webstranicu ili kontaktirajte lokalnog distributera. Sačuvajte račun za kupovinu u slučaju reklamacije.