Dasqua 4710-1205 Digital Depth Gauge Instruction Manual

1. Uvod

Thank you for choosing the Dasqua 4710-1205 Digital Depth Gauge. This precision instrument is designed for accurate measurement of hole depths and depths of features on workpieces, including those with grooved or raised surfaces. Manufactured in accordance with DIN 863 standards, this gauge provides reliable and consistent results. Please read this manual thoroughly before operation to ensure proper use and to maintain the longevity of your tool.

2. Sigurnosna uputstva

• Always handle the depth gauge with care to avoid dropping or impacting it, which can affect its accuracy.
• Keep the gauge clean and free from dust, dirt, and moisture.
• Do not attempt to disassemble or modify the instrument. Repairs should only be performed by qualified personnel.
• Spremite mjerač u zaštitnu kutiju kada nije u upotrebi kako biste spriječili oštećenje.
• Držite baterije van dohvata djece. Iskorišćene baterije odložite odgovorno.

3. Sadržaj paketa

Prilikom raspakivanja, molimo Vas da provjerite da li su sve dolje navedene stavke prisutne i u dobrom stanju:

• Dasqua 4710-1205 Digital Depth Gauge
• Set of Extension Rods (various lengths)
• Zaštitna torbica za skladištenje
• Uputstvo za upotrebu (ovaj dokument)
• Baterija (može biti unaprijed instalirana ili zasebna)

4. Proizvod je gotovview

The Dasqua 4710-1205 Digital Depth Gauge features a large, easy-to-read display and a hardened, ground, and lapped spindle for ultimate precision. It includes a ratchet stop mechanism for constant measuring force.

Slika 1: Dasqua 4710-1205 Digital Depth Gauge with its included extension rods. This image shows the main body of the gauge, the digital display, control buttons, and several extension rods of varying lengths.

Ključne komponente:

• Digitalni prikaz: Large LCD for clear reading of measurements.
• Measuring Base: Provides a stable reference surface.
• vreteno: The movable rod that extends to measure depth.
• Ratchet Stop: Ensures consistent measuring pressure.
• Kontrolna dugmad: For Power ON/OFF, Zero setting, and Unit conversion (if applicable).
• Produžne šipke: Attach to the spindle to increase the measuring range.

5. Podešavanje

5.1. Instalacija baterije

1. Locate the battery compartment cover, usually on the back or side of the digital display unit.
2. Use a small screwdriver or coin to open the cover.
3. Insert the battery (typically a CR2032 coin cell) with the positive (+) side facing up.
4. Vratite sigurno poklopac odeljka za baterije.

5.2. Početno čišćenje

Before first use, gently wipe all measuring surfaces with a clean, lint-free cloth. Avoid using harsh solvents.

5.3. Attaching Extension Rods

Select the appropriate extension rod based on the depth you intend to measure. Carefully screw the chosen extension rod onto the end of the gauge's spindle. Ensure it is finger-tight but do not overtighten.

6. Uputstvo za upotrebu

6.1. Uključivanje/isključivanje napajanja

Pritisnite ON/OFF button to turn the gauge on. Press it again to turn the gauge off. The gauge may also have an auto-off feature after a period of inactivity.

6.2. Podešavanje nule

1. Place the measuring base firmly on a flat, stable reference surface.
2. Extend the spindle (with any attached extension rod) until its tip makes contact with the reference surface. Use the ratchet stop to apply consistent, light pressure.
3. Pritisnite NULA button. The display should now read 0.00 mm. The gauge is now ready for measurement.

6.3. Mjerenje

1. Ensure the gauge is properly zeroed on a suitable reference surface.
2. Place the measuring base of the gauge firmly on the top surface of the workpiece or hole from which you want to measure the depth.
3. Carefully extend the spindle until its tip reaches the bottom of the hole or feature. Use the ratchet stop to ensure consistent measuring force.
4. Očitajte mjerenje direktno s digitalnog displeja.

6.4. Unit Conversion (if applicable)

If your model supports it, press the mm/inč button to switch between metric (millimeters) and imperial (inches) units.

7. Održavanje

7.1. Čišćenje

After each use, wipe the gauge clean with a dry, lint-free cloth. For stubborn dirt, a cloth lightly dampened with isopropyl alcohol can be used, but avoid excessive moisture. Do not use abrasive cleaners or solvents.

7.2. Skladištenje

Store the depth gauge in its original protective case in a dry, temperature-controlled environment. Avoid areas with high humidity or extreme temperature fluctuations.

7.3. Zamjena baterije

When the display becomes dim or erratic, it's time to replace the battery. Follow the instructions in Section 5.1.

8. Otkrivanje problema

9. Specifikacije

• Model: Dasqua 4710-1205
• Mjerni opseg: 0-25 mm
• diplomiranje: 0.01 mm
• standardno: Manufactured in accordance with DIN 863
• Karakteristike: Ratchet stop for constant pressure, hardened, ground, and lapped spindle, large easy-to-read display, includes extension rods.

10. Garancija i podrška

Dasqua products are manufactured to high-quality standards. For specific warranty information, please refer to the warranty card included with your product or visit the official Dasqua website.

For technical support, spare parts, or service inquiries, please contact your authorized Dasqua dealer or the Dasqua customer service department. When contacting support, please have your model number (4710-1205) and purchase date available.