Uvod
This manual provides comprehensive instructions for the safe and efficient installation, operation, and maintenance of your ErGear Triple Monitor Mount, Model EGTS5B. Please read this manual thoroughly before installation and retain it for future reference.
Karakteristike proizvoda
- Široka kompatibilnost: Supports three monitors from 13 to 27 inches, with VESA mounting patterns of 75x75mm or 100x100mm. Each arm can hold up to 17.6 lbs (8 kg).
- Superior Stability and Durability: Constructed from premium steel, the monitor arm is tested for 20,000 lift cycles, ensuring long-lasting performance without monitor sag or wobble.
- Fleksibilno podešavanje: Features +/-90° swivel, +/-45° tilt, and 360° rotation for optimal viewing angles, reducing neck and eye strain.
- Integrisano upravljanje kablovima: Neatly routes wires along the arms and pole for a clean workspace.
- Built-in USB 3.0 Ports: Two USB 3.0 ports on the base provide convenient charging and data transfer directly from your desktop.
- Dvije opcije instalacije: Supports C-clamp mounting for desks 0.39"–3.54" thick and grommet mounting for desks 0.39"–3.15" thick.
Specifikacije
| Specifikacija | Vrijednost |
|---|---|
| Brand | ErGear |
| Broj modela | EGTS5B |
| Kompatibilnost veličine monitora | 13-27 inča |
| VESA kompatibilnost | 75x75mm, 100x100mm |
| Nosivost po ruci | Do 17.6 lbs (8 kg) |
| Movement Type | Articulating, Tilt, Swivel, Rotation |
| Maksimalni kut nagiba | 45 stepeni |
| Debljina stola (C-Clamp) | 0.39"–3.54" |
| Debljina stola (ušica) | 0.39"–3.15" |
| Materijal | legirani čelik |
| Boja | Crna |
| Dimenzije proizvoda | 16.26 x 12.8 x 7.95 inča |
| Težina artikla | 13.66 funte |
Instalacija
The ErGear Triple Monitor Mount offers two primary installation methods: C-clamp and grommet mounting. Choose the method best suited for your desk.
1. Desk Compatibility Check
Ensure your monitors are compatible with VESA 75x75mm or 100x100mm patterns and weigh no more than 17.6 lbs each. Verify your desk thickness for the chosen mounting option:
- C-Clamp: 0.39"–3.54" (10-90mm) thick
- grmmet: 0.39"–3.15" (10-80mm) thick
Figure 1: Product compatibility overview, including monitor size, VESA, weight, and desk thickness requirements.
Figure 2: Guide to checking VESA hole patterns on your monitor and removing existing stands.
2. Choose Mounting Option
Figure 3: Visual representation of C-clamp and Grommet mounting options with corresponding desk thickness requirements.
3. Assemble the Mount
Follow the detailed instructions provided in the package for assembling the main pole and arms. Ensure all screws are tightened securely.
4. Attach Monitors
Carefully attach your monitors to the VESA plates on each arm. Ensure the VESA screws are tightened to secure the monitors.
Video 1: Official ErGear video demonstrating the assembly and installation of the Triple Monitor Stand (Model EGTS5B).
Rad i podešavanja
The ErGear Triple Monitor Mount allows for extensive adjustments to achieve an ergonomic setup. Always adjust the tension of the gas spring arms and tilt head after mounting your monitors.
1. Podešavanje napetosti plinske opruge
If your monitor is falling down or rising up unexpectedly, the gas spring tension needs adjustment. Locate the screw on the top of the center joint of the monitor arm.
- To increase tension (raise monitor), turn the bolt counter-clockwise.
- To decrease tension (lower monitor), turn the bolt clockwise.
Hold the upper arm horizontally during adjustment to ensure proper calibration. The arm should maintain its position once correctly adjusted.
Video 2: Demonstration of gas spring adjustment for monitor arms to ensure proper height positioning.
Slika 4: Detaljno view of the gas spring tension adjustment point on the monitor arm.
2. Securing the Tilt Head
If the monitor tilt head is dropping down, tighten the bolt on the tilt mechanism to secure the desired angle. Turn the bolt clockwise to increase tension.
Video 3: Instructions on how to secure the tilt head of the monitor arm to prevent monitors from dropping.
3. Full Motion Adjustments
The arms allow for +/-90° swivel, +/-45° tilt, and 360° rotation. Adjust your monitors to your preferred ergonomic position. The central monitor is fixed in height on the pole, while the side arms offer independent height adjustment along the pole and gas spring movement.
Slika 5: Gotovoview of the full range of motion for the monitor arms.
Slika 6: Pramples of multiple screen configurations for enhanced productivity.
Cable Management and USB Ports
The mount features integrated cable management channels to keep your workspace tidy. Route all monitor and power cables through these channels for a clean setup.
Figure 7: Integrated USB 3.0 ports on the mount base for convenient device charging and data transfer.
Slika 8: Prample of effective cable management using the integrated channels.
Održavanje
To ensure the longevity and optimal performance of your ErGear Triple Monitor Mount, follow these maintenance guidelines:
- Redovno čišćenje: Obrišite nosač mekom krpomamp krpom da biste uklonili prašinu i ostatke. Izbjegavajte abrazivna sredstva za čišćenje.
- Provjerite veze: Periodically inspect all screws and bolts to ensure they remain tight. Re-tighten if necessary to prevent instability.
- Gas Spring Check: If monitors begin to sag or rise unexpectedly, re-adjust the gas spring tension as described in the "Operating and Adjustments" section.
Rješavanje problema
If you encounter issues with your ErGear Triple Monitor Mount, refer to the following common troubleshooting steps:
- Monitor Sags or Drops: Adjust the gas spring tension by turning the bolt counter-clockwise to increase tension. Ensure the monitor weight is within the specified limit (17.6 lbs per arm).
- Monitor Rises Too High: Adjust the gas spring tension by turning the bolt clockwise to decrease tension.
- Monitor se naginje prema dolje: Tighten the tilt mechanism bolt on the VESA plate to secure the desired tilt angle.
- Planina se osjeća nestabilno: Provjerite da li je C-clamp or grommet mount is securely fastened to the desk and all connections on the pole and arms are tightened. Ensure your desk is stable and can support the combined weight of the mount and monitors.
- USB portovi ne rade: Check that the USB cable from the mount is properly connected to your computer or a power source.
Garancija i podrška
For warranty information, technical support, or replacement parts, please contact ErGear customer service through their official webweb-mjesto ili prodavača gdje je proizvod kupljen. Sačuvajte račun kao dokaz o kupovini.
ErGear Official Webstranica: Visit the ErGear Store
