Einhell GC-PM 40/1 termalna kosilica - uputstvo za upotrebu

1. Uvod

This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your Einhell GC-PM 40/1 Thermal Lawn Mower. This robust and reliable gardening tool is designed for mowing medium-sized lawn areas up to 800 m².

Please read this manual thoroughly before operating the lawn mower to ensure proper use and to prevent injury or damage. Keep this manual in a safe place for future reference.

Figure 1: The Einhell GC-PM 40/1 Thermal Lawn Mower, a robust and reliable tool for lawn care.

2. Sigurnosna uputstva

Always observe the following safety precautions when operating your lawn mower:

• Pročitajte priručnik: Familiarize yourself with all controls and proper use before starting the engine.
• Lična zaštitna oprema: Wear sturdy footwear, long trousers, and eye protection. Do not operate barefoot or in open sandals.
• Očistite područje: Before mowing, clear the area of stones, sticks, wires, and other debris that could be thrown by the blade.
• Držite podalje posmatrače: Ensure children, pets, and other people are kept at a safe distance (at least 15 meters) from the mowing area.
• Rukovanje gorivom: Refuel outdoors only. Do not smoke while refueling. Allow the engine to cool before adding fuel. Store fuel in approved containers.
• Rad motora: Do not operate the engine in enclosed spaces where carbon monoxide fumes can accumulate.
• Slope Safety: Mow across the face of slopes, never up and down. Exercise extreme caution when changing direction on slopes. Avoid mowing excessively steep slopes.
• Sigurnost oštrice: Never place hands or feet near rotating parts. Always stop the engine and disconnect the spark plug wire before performing any adjustments, cleaning, or maintenance.
• Održavanje: Regularly check all nuts, bolts, and screws to ensure the equipment is in safe working condition. Replace worn or damaged parts immediately.

3. Proizvod je gotovview

The Einhell GC-PM 40/1 is a push-type thermal lawn mower designed for efficient lawn maintenance. Key features include:

• motor: A powerful 4-stroke, 1-cylinder engine delivering 1.2 kW of power with a maximum speed of 2,900 RPM.
• Širina rezanja: A generous 40 cm cutting width for efficient coverage.
• Podešavanje visine košenja: Features a 3-level single-wheel cutting height adjustment, allowing settings from 30 mm to 60 mm.
• Vreća za sakupljanje trave: Equipped with a durable 45-liter fabric grass collection bag. It includes a fill-level indicator and two handles for easy emptying.
• upravljač: A foldable handlebar for compact storage and easy transport. The starting cable is conveniently located on the handlebar for effortless starting.
• Stanovanje: Constructed with a robust and aesthetically pleasing solid plastic housing.

Slika 2: Krupni plan view of the mower's engine and durable plastic deck.

Figure 3: The 45-liter fabric grass collection bag with its fill-level indicator.

Figure 4: The foldable handlebar design for convenient storage and transport.

Figure 5: The 3-level single-wheel cutting height adjustment mechanism.

4. Podešavanje

Prije prve upotrebe, kosilica za travu zahtijeva određenu montažu i pripremu.

4.1 Sklop upravljača

1. Unfold the lower handlebar section and secure it with the provided bolts and wing nuts.
2. Attach the upper handlebar section, ensuring the starting cable is routed correctly and not pinched. Secure with the remaining bolts and wing nuts.

4.2 Dodavanje motornog ulja

The engine is supplied without oil. It is crucial to fill the engine with appropriate 4-stroke engine oil before starting. Refer to the engine manual for specific oil type and capacity. Do not overfill.

4.3 Dodavanje goriva

Use fresh, unleaded petrol (gasoline) with an octane rating of at least 91 RON. Do not use E85 or other ethanol blends not approved for small engines. Fill the fuel tank carefully, avoiding spills. Ensure the fuel cap is securely tightened.

4.4 Početne provjere

• Provjerite jesu li svi pričvršćivači zategnuti.
• Uvjerite se da je žica svjećice dobro povezana.
• Verify the grass collection bag is correctly attached.

5. Operativni

Slijedite ove korake za siguran i efikasan rad vaše kosilice.

5.1 Podešavanje visine košnje

The cutting height can be adjusted to 3 levels (30-60 mm) using the single wheel adjustment mechanism. Ensure the engine is off and the spark plug wire is disconnected before making adjustments. Lift the mower slightly and move the adjustment lever to the desired height setting.

5.2 Pokretanje motora

1. Provjerite da li je rezervoar za gorivo napunjen i da li je nivo ulja ispravan.
2. Pritisnite pumpicu za gorivo (ako postoji) 3-5 puta dok se gorivo ne vidi.
3. Držite ručicu kočnice motora uz upravljač.
4. Pull the starter cord firmly and steadily until the engine starts. Do not let the cord snap back.

5.3 Košenje

Push the mower at a steady pace. For best results, overlap each pass slightly. Avoid mowing wet grass, as it can clog the mower and lead to an uneven cut. The mower is recommended for areas up to 800 m².

Figure 6: A user operating the Einhell GC-PM 40/1 lawn mower on a lawn.

5.4 Zaustavljanje motora

Release the engine brake lever to stop the engine. Wait for all moving parts to come to a complete stop before approaching the mower.

5.5 Pražnjenje vreće za travu

When the fill-level indicator on the grass bag shows it is full, stop the engine and allow the blade to stop. Carefully remove the grass bag using its two handles and empty the clippings. Reattach the bag securely before resuming operation.

6. Održavanje

Redovno održavanje osigurava dugotrajnost i optimalne performanse vaše kosilice.

6.1 Čišćenje

After each use, clean the mower deck and grass bag. Remove grass clippings and debris. Do not use high-pressure water directly on the engine or electrical components.

6.2 Provjera i zamjena motornog ulja

Check the engine oil level before each use. Change the engine oil after the first 5 hours of operation, and then every 25 hours or annually, whichever comes first. Refer to the engine manual for detailed instructions.

6.3 Inspekcija svjećica

Inspect the spark plug annually or every 50 hours. Clean or replace if necessary. Ensure the gap is set correctly according to the engine manual.

6.4 Čišćenje filtera za zrak

Clean the air filter regularly, especially in dusty conditions. A dirty air filter can reduce engine performance. Refer to the engine manual for cleaning instructions.

6.5 Pregled lopatica

Regularly inspect the cutting blade for sharpness and damage. A dull or damaged blade can lead to poor cutting performance and excessive vibration. Have the blade sharpened or replaced by a qualified service technician if needed.

6.6 Skladištenje

For long-term storage, clean the mower thoroughly. Drain the fuel tank or add a fuel stabilizer. Remove the spark plug and add a small amount of engine oil into the cylinder, then slowly pull the starter cord a few times to distribute the oil. Store the mower in a dry, well-ventilated area. The foldable handlebar allows for compact storage.

7. Otkrivanje problema

Ovaj odjeljak se bavi uobičajenim problemima s kojima se možete susresti.

Ako naiđete na probleme koji nisu ovdje navedeni ili ako rješenja ne riješe problem, obratite se korisničkoj podršci.

8. Specifikacije

9. Garancija i podrška

This product comes with a manufacturer's warranty. Spare parts availability is guaranteed for 2 years from the date of purchase.

For warranty claims, technical support, or to order spare parts, please contact your authorized Einhell dealer or visit the official Einhell webstranica. Molimo vas da pripremite broj modela (3404832) i dokaz o kupovini kada kontaktirate podršku.