Scheppach HS110 Stolna pila Uputstvo za upotrebu

1. Uvod

This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your Scheppach HS110 Table Saw. Please read this manual thoroughly before operating the machine to ensure proper use and to prevent injury or damage.

The Scheppach HS110 is a powerful 2000W table saw designed for cutting wood with a 254mm blade. It operates on a 230V, 50Hz power supply and features depth adjustment for versatile cutting applications.

2. Sigurnosna uputstva

Uvijek dajte prioritet sigurnosti prilikom rada s električnim alatima. Nepoštivanje ovih uputa može dovesti do ozbiljnih povreda ili materijalne štete.

2.1 Opća sigurnost

• Pročitajte priručnik: Prije upotrebe, upoznajte se sa svim uputama i upozorenjima.
• Radna oblast: Održavajte radni prostor čistim, dobro osvijetljenim i bez nereda.
• Djeca i prolaznici: Držite podalje djecu i osobe u blizini dok radite s testerom.
• Lična zaštitna oprema (PPE): Always wear safety glasses, hearing protection, and appropriate work gloves. Avoid loose clothing or jewelry.
• električna sigurnost: Ensure the power supply matches the saw's requirements (230V, 50Hz). Do not operate in damp ili vlažnim uslovima.
• Zaštita oštrice: Always use the blade guard unless specifically instructed otherwise for a particular operation.
• Stabilna površina: Ensure the table saw is placed on a stable, level surface.

2.2 Specific Table Saw Safety

• Sprečavanje povratnog udara: Use a push stick for narrow cuts. Never stand directly in line with the blade.
• Izbor oštrice: Use the correct blade type for the material being cut. Ensure the blade is sharp and free from damage.
• Podešavanja: Disconnect power before making any adjustments or changing blades.
• Materijalna podrška: Always support the workpiece adequately, especially for long or wide pieces.

3. Montaža i postavljanje

Carefully unpack all components and verify against the packing list. If any parts are missing or damaged, contact Scheppach customer service.

3.1 Raspakivanje i pregled

Remove the table saw and all accessories from the packaging. Inspect for any shipping damage. Keep packaging materials until you are sure all parts are present and the saw is functioning correctly.

3.2 Sastavljanje postolja

Assemble the metal stand components according to the diagrams provided in the separate assembly sheet. Ensure all bolts are securely tightened for stability.

Figure 3.1: Fully assembled Scheppach HS110 Table Saw, showing the main unit mounted on its sturdy stand.

3.3 Attaching Table Extensions

The HS110 comes with side table extensions to increase the working surface. Attach these extensions to the main table using the provided hardware. Ensure they are level with the main table surface.

Figure 3.2: Detail of a table extension, illustrating its design and attachment points.

3.4 Blade Installation (if not pre-installed)

1. Isključite napajanje: Unplug the saw from the power outlet.
2. Remove Table Insert: Lift out the table insert plate around the blade.
3. Otpustite maticu osovine: Use the provided wrenches to loosen the arbor nut, holding the outer flange.
4. Instalirajte oštricu: Place the 254mm blade onto the arbor, ensuring the teeth are pointing towards the front of the saw (upwards at the cutting edge).
5. Sigurna oštrica: Vratite vanjsku prirubnicu i maticu osovine, čvrsto ih zategnite.
6. Replace Insert: Place the table insert back into position.

4. Operacija

Prije upotrebe, provjerite da li ste razumjeli i slijedite sve sigurnosne mjere. Uvijek nosite odgovarajuću ličnu zaštitnu opremu.

4.1 Uključivanje/isključivanje

• Uključiti: Press the green "ON" button.
• Ugasiti: Press the red "OFF" button. In case of emergency, press the large red emergency stop button.

4.2 Adjusting Blade Depth

The blade depth can be adjusted using the handwheel on the front of the saw. Rotate the handwheel clockwise to raise the blade and counter-clockwise to lower it. For through cuts, the blade should extend approximately 3-6mm above the workpiece.

4.3 Podešavanje ugla kosine

The blade can be tilted for bevel cuts. Loosen the bevel locking knob, adjust the blade to the desired angle (0-45 degrees) using the angle scale, and then re-tighten the locking knob.

4.4 Using the Rip Fence

The rip fence is used for making accurate parallel cuts. Position the fence to the desired width, ensuring it is parallel to the blade. Lock the fence securely in place before making a cut.

Figure 4.1: A user demonstrating the proper technique for feeding a workpiece through the table saw, emphasizing the use of the rip fence.

4.5 Making Cuts

1. Pripremite radni komad: Provjerite da radni komad nema eksera, vijaka ili drugih stranih predmeta.
2. Postavite: Adjust blade depth and angle, and position the rip fence or miter gauge as needed.
3. Početak pile: Uključite testeru i pustite da sečivo postigne punu brzinu.
4. Materijal za hranjenje: Slowly and steadily feed the workpiece into the blade. Use a push stick for narrow cuts or when your hands are close to the blade.
5. Potpuni rez: Continue feeding until the cut is complete. Do not remove off-cuts until the blade has stopped.
6. Turn Off Saw: Press the "OFF" button and wait for the blade to stop completely before leaving the machine.

Figure 4.2: A user performing a cut on the Scheppach HS110, highlighting the importance of proper hand placement and material support.

5. Održavanje

Regular maintenance ensures the longevity and safe operation of your Scheppach HS110 Table Saw. Always disconnect the power before performing any maintenance.

• čišćenje: After each use, clean sawdust and debris from the table, blade guard, and motor housing using a brush or vacuum cleaner. Do not use solvents.
• Inspekcija oštrice: Regularly inspect the saw blade for sharpness, cracks, or missing teeth. Replace damaged blades immediately.
• Pokretni dijelovi: Check all moving parts for proper alignment and smooth operation. Lubricate as necessary with a dry lubricant.
• Pričvršćivači: Periodically check all nuts, bolts, and screws for tightness and re-tighten if loose.
• Kabl za napajanje: Inspect the power cord for any damage or fraying. Replace if damaged.

6. Otkrivanje problema

This section addresses common issues you might encounter with your table saw. For problems not listed here, contact customer support.

7. Specifikacije

8. Garancija i podrška

Scheppach products are manufactured to high-quality standards. For warranty information, technical support, or to order replacement parts, please refer to the official Scheppach webstranice ili kontaktirajte njihov odjel za korisničku podršku.

Napomena: Informacije o dostupnosti rezervnih dijelova nisu dostupne u priloženim podacima o proizvodu.

Za dodatnu pomoć, molimo vas da posjetite Scheppach official website.