Pyle PVTA80 Bluetooth cijev AmpLifier Priručnik za prijemnik

1. Uvod

This manual provides detailed instructions for the Pyle PVTA80 Bluetooth Tube Amplifier Receiver. This 500W peak power stereo amplifier is designed for home audio systems, featuring vacuum tube technology for enhanced sound quality, Bluetooth wireless streaming, USB playback, and multiple audio inputs. Please read this manual thoroughly before operating the device to ensure proper use and longevity.

2. Ključne karakteristike

• 4 Snaga vakuumske cijevi Ampdizalica: Delivers 500W peak power with vacuum tubes, known for producing a warm and rich audio experience.
• Bluetooth bežični streaming: Seamlessly connects to smartphones, tablets, laptops, and other Bluetooth-enabled devices for audio playback. Features Bluetooth Version 4.2 with a wireless range of 40+ feet.
• Built-in USB Playback: Supports MP3 audio playback directly from a USB drive.
• Više audio ulaza: Includes two CD/DVD (L/R) RCA inputs for connecting external audio sources.
• Izlaz subwoofera: Dedicated output for connecting an external subwoofer.
• Izlazi za zvučnike: Two speaker outputs supporting 4-8 ohm speakers.
• Kontrole gornje ploče: Easy access to input selection, play/pause, previous/next song, and master volume.
• Led displej: Blue LED screen provides media playback information.
• Integrisani ventilator za hlađenje: Prevents overheating during extended operation.
• daljinski upravljač: Daljinski upravljač sa svim funkcijama za praktično rukovanje.

Image: The Pyle PVTA80 ampizložba životaasing its four vacuum tubes, positioned between two bookshelf speakers, highlighting its audio capabilities.

3. Šta se nalazi u kutiji

• Pyle PVTA80 Bluetooth cijev AmpLifier Receiver
• Power Cable
• Remote Control (requires 2x 'AAA' batteries, not included)

Image: The Pyle PVTA80 amplifier shown alongside its remote control, with key dimensions (length, width, height) indicated.

4. Proizvod je gotovview

4.1 Kontrole na prednjoj ploči

Slika: Front view of the Pyle PVTA80 amplifier, displaying the vacuum tubes, control knobs, LED screen, and the included remote control.

• Prekidač za uključivanje/isključivanje: Uključuje ampsnaga spasioca.
• Odaberite ulaz: Cycles through available audio inputs (Bluetooth, USB, CD/DVD).
• USB čitač: Port for USB flash drives for MP3 playback.
• Master Volume Controller: Podešava ukupnu jačinu zvuka na izlazu.
• Prethodna/Sljedeća pjesma: Navigates tracks during USB or Bluetooth playback.
• Funkcija reprodukcije/pauze: Controls playback for USB or Bluetooth sources.
• LED ekran: Shows current input mode and playback information.

4.2 Priključci stražnje ploče

Slika: Stražnja strana view of the Pyle PVTA80 amplifier, detailing the various input and output ports, including CD/DVD inputs, subwoofer output, speaker terminals, and power input.

• CD/DVD Inputs (L/R): RCA jacks for connecting external audio sources like CD/DVD players.
• Izlaz subwoofera: RCA jack for connecting an active subwoofer.
• Izlazi za zvučnike: Binding posts for connecting passive speakers (4-8 ohms).
• AC 120V/240V Input: Power connection for the amplifier.
• 120V/240V Voltage Selektor: Switch to select appropriate voltage za vašu regiju.
• ventilator za hlađenje: Integrated fan for thermal management.

Slika: Krupni plan views highlighting the built-in cooling fan, USB reader, and the subwoofer and speaker output connections on the Pyle PVTA80 amplifier.

5. Upute za postavljanje

1. Raspakivanje: Pažljivo uklonite amplifier and all accessories from the packaging.
2. plasman: Postavite amplifier on a stable, flat surface with adequate ventilation. Ensure the cooling fan is not obstructed.
3. Voltage Izbor: Before connecting the power cable, verify the 120V/240V voltage selector on the rear panel matches your local power supply. Adjust if necessary using a small screwdriver.
4. Veza zvučnika: Connect your passive speakers to the "Speaker Output" binding posts on the rear panel. Ensure correct polarity (+ to + and - to -) for each speaker. The amplifier supports 4-8 ohm speakers.
5. Subwoofer Connection (Optional): If using an active subwoofer, connect its input to the "Subwoofer Output" RCA jack on the rear panel.
6. Povezivanje izvora zvuka:
   • For CD/DVD players or other analog sources, connect them to the "CD/DVD Input (L/R)" RCA jacks.
   • For USB playback, insert a USB flash drive into the "USB Reader" port on the front panel.
7. Priključak za napajanje: Connect the supplied power cable to the AC 120V/240V input on the rear panel, then plug it into a wall outlet.

6. Uputstvo za upotrebu

1. Uključeno: Press the Power ON/OFF switch on the front panel. The LED display will illuminate.
2. Odabir izvora ulaza: Use the "Input Select" button on the front panel or the remote control to cycle through the available input sources (Bluetooth, USB, CD/DVD). The selected input will be shown on the LED display.
3. Podešavanje glasnoće: Rotate the "Master Volume Controller" knob on the front panel or use the VOL+/- buttons on the remote control to adjust the audio output level.
4. 6.1 Bluetooth rad
   • Select "Bluetooth" as the input source. The LED display will show "BLUE".
   • Na uređaju s omogućenom Bluetooth vezom (pametni telefon, tablet itd.) potražite dostupne Bluetooth uređaje.
   • Select "Pyle Speaker" from the list to pair. A confirmation tone may sound upon successful pairing.
   • Nakon uparivanja, možete strimovati zvuk sa svog uređaja na amplifier. Use your device or the amplifier's controls (Play/Pause, Previous/Next) to manage playback.
   

   Image: The Pyle PVTA80 amplifier with its LED display showing "BLUE", alongside a smartphone indicating a successful Bluetooth connection, demonstrating wireless audio streaming.

5. 6.2 Reprodukcija s USB-a
   • Umetnite USB fleš disk koji sadrži MP3 audio zapis files into the "USB Reader" port on the front panel.
   • Select "USB" as the input source. The amplifier will automatically begin playing MP3 files.
   • Use the Play/Pause, Previous/Next buttons on the front panel or remote control to manage playback.
   

   Image: A hand inserting a USB flash drive into the USB port on the front panel of the Pyle PVTA80 amplifier, illustrating the USB playback feature.

6. 6.3 CD/DVD Input
   • Ensure your CD/DVD player or other analog source is connected to the "CD/DVD Input (L/R)" RCA jacks on the rear panel.
   • Select "CD/DVD" as the input source.
   • Begin playback on your connected source device.

7. Održavanje

• čišćenje: Koristite meku, suhu krpu za čišćenje spoljašnjosti ampNe koristite tekuća sredstva za čišćenje ili rastvarače.
• ventilacija: Ensure the cooling fan and ventilation openings are free from dust and obstructions to prevent overheating.
• Njega cijevi: The vacuum tubes are delicate. Avoid touching them when hot. If replacement is needed, consult a qualified technician.
• Skladištenje: Ako uređaj skladištite duži period, isključite ga iz struje i čuvajte ga na hladnom i suhom mjestu.

8. Otkrivanje problema

9. Specifikacije

10. Podrška i garancija

For technical support or warranty inquiries, please refer to the contact information provided with your purchase or visit the official Pyle webSačuvajte dokaz o kupovini za slučaj reklamacije.