XTUGA RX120 12-Channel Professional Audio Mixer User Manual

1. Uvod

This manual provides detailed instructions for the XTUGA RX120 12-Channel Professional Audio Mixer. Please read this manual thoroughly before operating the device to ensure proper usage, optimal performance, and to prevent damage. Keep this manual for future reference.

2. Važna sigurnosna uputstva

• Izvor napajanja: Connect the mixer only to the specified power supply voltage. Provjerite da kabel za napajanje nije oštećen ili priklješten.
• Voda i vlaga: Ne izlažite uređaj kiši ili vlazi. Ne stavljajte na uređaj predmete napunjene tekućinom, poput vaza.
• ventilacija: Osigurajte adekvatnu ventilaciju. Ne blokirajte ventilacijske otvore.
• toplina: Ne postavljajte uređaj u blizinu izvora toplote kao što su radijatori, grijalice, peći ili drugi uređaji (uključujući ampLifiers) koji proizvode toplotu.
• čišćenje: Čistite samo suhom krpom.
• servisiranje: Ne pokušavajte sami servisirati ovaj proizvod. Sve servise prepustite kvalificiranom servisnom osoblju.
• uzemljenje: Nemojte narušiti sigurnosnu svrhu polariziranog ili uzemljenog utikača.

3. Proizvod je gotovview i kontrole

The XTUGA RX120 is a 12-channel audio mixer designed for professional sound applications. It features a built-in 24-bit DSP digital effect processor, USB connectivity for MP3 playback and recording, and Bluetooth for wireless audio streaming.

3.1 Raspored prednje ploče

Below is an illustration of the mixer's front panel, highlighting key controls and connections.

Slika 3.1: Front view of the XTUGA RX120 12-Channel Audio Mixer, showing all input channels, main controls, and the digital display.

Slika 3.2: Detaljno view of the XTUGA RX120 mixer's channel controls, including Mono channel input jack, 6.3 Interface, Gain knob, High knob, MID knob, Low knob, Aux send, Effect control, Left and right channel balance adjustment, Channel volume knob, Mute button, and Monitor button.

3.2 Ključne karakteristike

• 12-channel input (XLR and 6.3mm Line inputs).
• Built-in 24-bit DSP digital effects processor with 24 presets.
• USB interface for MP3 playback and direct recording.
• Bluetooth povezivost za bežični audio streaming.
• 3-band EQ on each mono channel (High, Mid, Low).
• Phantom power (+48V) for condenser microphones.
• Peak indicators and PFL (Pre-Fader Listen) function on each channel.
• Main stereo output, AUX outputs, and headphone output.

4. Vodič za postavljanje

4.1 Priključak za napajanje

1. Provjerite je li prekidač za napajanje miksera u položaju ISKLJUČENO.
2. Spojite priloženi adapter za napajanje na ulaz za napajanje miksera.
3. Uključite adapter za napajanje u odgovarajuću AC utičnicu.

4.2 Povezivanje audio izvora

The RX120 offers various input options for microphones, instruments, and other audio devices.

• mikrofoni: Connect dynamic or condenser microphones to the XLR inputs (MIC) on channels 1-12. For condenser microphones, activate the +48V Phantom Power switch located near the main output section.
• Uređaji linijskog nivoa: Povežite instrumente (klavijature, gitare sa predpripremomamps), CD players, or other line-level devices to the 6.3mm (1/4") LINE inputs on channels 1-12.
• Stereo ulazi: Use the TAPE IN (RCA) or AUX IN (6.3mm) for additional stereo sources.

4.3 Povezivanje izlaza

• Glavni izlaz: Connect the MAIN OUT (XLR or 6.3mm) to your power ampuređaj za snimanje, aktivni zvučnici ili interfejs za snimanje.
• AUX izlazi: Use AUX 1 and AUX 2 outputs for monitor mixes or external effects processors.
• slušalice: Za monitoring, spojite slušalice na PHONES izlaz.

5. Uputstvo za upotrebu

5.1 Osnovne operacije s kanalima

1. Kontrola pojačanja: Podesite GAIN knob at the top of each channel to set the input level. Aim for the PEAK LED to flash only occasionally, indicating a strong signal without clipping.
2. Izjednačavanje (EQ): Koristite HIGH, MID, i LOW knobs to adjust the tonal characteristics of each channel.
3. AUX šalje: The AUX1 i AUX2/EFF knobs control the amount of signal sent to the respective auxiliary outputs or the internal effects processor.
4. Pan Control: The PAN knob adjusts the stereo position of the channel's signal in the main mix (left to right).
5. Dugme za isključivanje zvuka: Pritisnite MUTE button to silence the channel.
6. PFL (Pre-Fader Listen) dugme: Pritisnite PFL button to monitor the channel's signal before the fader, allowing you to set gain levels accurately via headphones.
7. Fader kanala: Use the channel fader to control the volume of the channel in the main mix.

5.2 Main Mix Control

• Main Faders: The LEFT MAIN and RIGHT MAIN faders control the overall output volume of the stereo mix.
• mjerači nivoa: Monitor the main output level using the LED meters. Aim for levels that are strong but do not consistently peak into the red.
• Nivo telefona: Adjust the PHONES VOL knob to control the headphone output level.

6. DSP Digital Effects Processor

The RX120 features a built-in 24-bit DSP effects processor with 24 selectable presets, including various reverbs, delays, chorus, and more.

Slika 6.1: Digital display and list of 24 DSP effects available on the XTUGA RX120 mixer.

1. Odabir efekata: Okrenite PROGRAM (PUSH) knob to scroll through the 24 available effects displayed on the digital screen.
2. Confirming Selection: Pritisnite PROGRAM (PUSH) knob to confirm your effect selection.
3. Primjena efekata: Koristite AUX2/EFF knob on each channel to send the desired amount of that channel's signal to the selected effect. The FX fader controls the overall return level of the effects into the main mix.

7. Bluetooth povezivanje

The RX120 allows wireless audio streaming from Bluetooth-enabled devices.

1. Aktivirajte Bluetooth: Press the MODE button on the MP3/USB section until "BT" appears on the digital display.
2. Uparivanje: On your Bluetooth device (smartphone, tablet, etc.), search for available devices and select "XTUGA RX120" (or similar name).
3. Reprodukcija: Once paired, play audio from your device. Control the volume using the MP3 channel fader on the mixer.

8. Reprodukcija i snimanje putem USB-a

The mixer supports MP3 playback from a USB drive and direct recording of the main mix to a USB drive.

8.1 MP3 reprodukcija

1. Umetnite USB fleš disk koji sadrži MP3 files u USB port.
2. The mixer should automatically detect the USB drive and begin playback. If not, press the MODE button to select USB mode.
3. Use the playback controls (Play/Pause, Previous, Next) on the MP3/USB section to navigate tracks.
4. Adjust the volume using the MP3 channel fader.

8.2 Recording to USB

1. Ensure a formatted USB flash drive is inserted into the USB port.
2. Set up your desired mix and levels.
3. Press the REC button on the MP3/USB section to start recording the main stereo mix to the USB drive. The display will indicate recording status.
4. Pritisnite ponovo dugme REC da zaustavite snimanje.

9. Održavanje

• čišćenje: Za čišćenje površine miksera koristite meku, suhu krpu. Izbjegavajte abrazivna sredstva za čišćenje ili rastvarače.
• Skladištenje: Kada se mikser ne koristi duži period, čuvajte ga na hladnom i suhom mjestu, dalje od direktne sunčeve svjetlosti i ekstremnih temperatura.
• ventilacija: Regularly check that ventilation openings are clear of dust and debris.

10. Otkrivanje problema

11. Specifikacije

12. Garancija i podrška

For warranty information and technical support, please refer to the warranty card included with your product or visit the official XTUGA webSačuvajte dokaz o kupovini za eventualne reklamacije.

Official XTUGA Webstranica: XTUGA Store on Amazon (Note: This link directs to the brand's store page on Amazon, which may contain support information or links to the official websajt.)