SHARKOON Elite Shark CA300T Extended ATX PC Case User Manual

1. Uvod

This manual provides comprehensive instructions for the SHARKOON Elite Shark CA300T Extended ATX PC Case. It covers the product's features, setup procedures, operational guidelines, maintenance tips, troubleshooting solutions, and detailed technical specifications. Please read this manual thoroughly before installation and use to ensure optimal performance and longevity of your PC case.

2. Ključne karakteristike

• Futuristički dizajn: The CA300T features an expressive front panel with a geometric pattern, framed by brushed aluminum, giving it a distinctive and modern aesthetic.
• Advanced Airflow: Equipped with three pre-installed 120mm RGB LED fans at the front and one at the rear, ensuring consistent airflow. The front panel includes a mesh grille for optimal ventilation, and the top panel offers a perforated cover for additional fan/radiator mounting.
• Illuminated I/O Panel: The side-mounted I/O panel includes standard audio ports, USB 3.0 ports, and a USB-C port, all featuring their own RGB illumination.
• Paneli od kaljenog stakla: Two tempered glass side panels provide a clear view of internal components. The right-side panel is partially tinted to conceal the power supply tunnel while highlighting SSDs or HDDs.
• Prostrani enterijer: Designed to accommodate large components, including graphics cards up to 42.5 cm, power supplies up to 24 cm, and CPU coolers up to 16.5 cm.
• Efikasno upravljanje kablovima: Features a spacious, foldable cable compartment and a sliding cable cover to keep wiring organized and out of sight.
• Opcije pohrane: Supports up to seven 2.5-inch drives or four 3.5-inch drives.

3. Sadržaj paketa

The SHARKOON Elite Shark CA300T PC Case package typically includes:

• SHARKOON Elite Shark CA300T PC Case (White)
• Pre-installed 120mm RGB LED Fans (3x Front, 1x Rear)
• Kutija s priborom (vijci, vezice za kablove, odstojnici itd.)
• Korisnički priručnik (ovaj dokument)

Note: Specific contents may vary slightly. Please check the packaging for a complete list.

4. Upute za postavljanje

Follow these steps to set up your SHARKOON Elite Shark CA300T PC case and install your components.

4.1. Priprema slučaja

1. Raspakujte kutiju: Pažljivo izvadite kućište računara iz ambalaže.
2. Uklonite bočne ploče: Unscrew the thumbscrews on the rear of the case for both tempered glass side panels. Gently slide and lift the panels to remove them. Place them on a soft, flat surface to prevent scratches.
3. Kutija za pribor: Locate the accessory box inside the case, which contains all necessary screws and mounting hardware.

4.2. Instalacija matične ploče

1. Instalirajte Standoffs: Ensure the correct standoffs are installed for your motherboard form factor (ATX, SSI EEB). The case typically has pre-installed standoffs for standard ATX.
2. Instalirajte I/O štit: If your motherboard requires an external I/O shield, install it into the rear opening of the case before mounting the motherboard.
3. Montaža matične ploče: Carefully place your motherboard onto the standoffs, aligning the screw holes. Secure the motherboard with the provided screws.

4.3. Instalacija jedinice za napajanje (PSU)

1. Pozicija napajanja: The PSU mounts at the rear bottom of the case. Slide your PSU into the designated compartment from the rear.
2. Sigurno napajanje: Align the PSU with the screw holes and secure it with the provided screws from the rear of the case.
3. Upravljanje kablovima: Route PSU cables through the cutouts to the back of the motherboard tray for organized cable management.

4.4. Instalacija pogona za pohranu podataka

The CA300T supports various drive configurations:

• 2.5-inčni SSD diskovi: Mount SSDs to the dedicated brackets behind the motherboard tray or within the PSU shroud.
• 3.5-inčni diskovi (HDD): Install HDDs into the drive cages located under the PSU shroud.

4.5. Instalacija grafičke kartice i kartice za proširenje

1. Uklonite poklopce utora: Uklonite potrebne poklopce za utore za proširenje sa stražnje strane kućišta.
2. Instalacijska kartica: Insert your graphics card or other expansion cards into the appropriate PCIe slots on the motherboard.
3. Sigurna kartica: Secure the card with the provided screws.

4.6. Spajanje kablova prednje ploče

Connect the front panel cables (USB 3.0, USB-C, HD Audio, Power Switch, Reset Switch, Power LED, HDD LED) to their corresponding headers on your motherboard. Refer to your motherboard manual for exact pin layouts.

4.7. Završna skupština

1. Upravljanje kablovima: Use the cable ties and routing channels to organize all internal cables behind the motherboard tray.
2. Ponovno pričvrstite bočne ploče: Carefully reattach both tempered glass side panels and secure them with the thumbscrews.

Slika 1: Unutrašnjost view of the CA300T, highlighting component space.

5. Uputstvo za upotrebu

5.1. Uključivanje sistema

After all components are installed and cables are connected, plug your power supply into a wall outlet and flip the PSU's power switch to the 'ON' position. Press the power button on the case's front I/O panel to start your computer.

5.2. Kontrola RGB osvjetljenja

The pre-installed RGB fans and illuminated I/O panel can be controlled via your motherboard's RGB software (if compatible) or a dedicated RGB controller if included with your motherboard or purchased separately. Refer to your motherboard manual for specific RGB header locations and software instructions.

Figure 2: The CA300T with its illuminated RGB fans and distinctive front panel.

6. Održavanje

Redovno održavanje pomaže u osiguravanju optimalnih performansi i produžava vijek trajanja komponenti vašeg računara.

6.1. Čišćenje filtera za prašinu

The CA300T includes magnetic dust filters. It is recommended to clean these filters every 1-3 months, depending on your environment, to maintain optimal airflow and prevent dust buildup inside the case.

1. Locate Filters: Identify the dust filters on the top, front, and bottom of the case.
2. Ukloni filtere: Gently pull or slide out the magnetic dust filters.
3. Očistite filtere: Use a soft brush, vacuum cleaner, or rinse with water (ensure completely dry before reinstallation) to remove accumulated dust.
4. Ponovna instalacija filtera: Place the clean filters back into their respective positions.

6.2. Generalno čišćenje

Za vanjske površine koristite meku,amp cloth to wipe down the case. Avoid abrasive cleaners or solvents that could damage the finish or tempered glass.

Slika 3: Vrh view of the CA300T, showing the perforated top panel.

7. Otkrivanje problema

Ovaj odjeljak se bavi uobičajenim problemima na koje možete naići tokom postavljanja ili rada.

7.1. Sistem se ne uključuje

• Provjerite napajanje: Ensure the power supply unit is properly connected to the wall outlet and the PSU's power switch is in the 'ON' position.
• Priključci na prednjoj ploči: Verify that the power switch cable from the case's front panel is correctly connected to the motherboard's power header.
• Internal Power Cables: Confirm that all necessary power cables (24-pin ATX, CPU 8-pin, GPU PCIe) are securely connected to the motherboard and components.

7.2. Ventilatori se ne okreću / RGB se ne pali

• Priključci ventilatora: Ensure all fan power cables are securely connected to the motherboard's fan headers or a fan controller.
• RGB priključci: Verify that RGB cables are correctly connected to the motherboard's RGB headers or a dedicated RGB controller.
• Software/Controller: Check your motherboard's BIOS/UEFI settings or RGB software to ensure fans and RGB lighting are enabled and configured correctly.

7.3. USB portovi ne funkcionišu

• Internal USB Headers: Confirm that the internal USB 3.0 and USB-C cables from the case's front panel are securely connected to the corresponding headers on your motherboard.
• Drajveri za matičnu ploču: Ensure all necessary motherboard chipset and USB drivers are installed.

8. Tehničke specifikacije

9. Garancija i podrška

9.1. Garancija na proizvod

The SHARKOON Elite Shark CA300T PC Case comes with a 2 godine garancije on spare parts. This warranty covers defects in materials and workmanship under normal use. Please retain your proof of purchase for warranty claims.

9.2. Ažuriranja softvera

Software updates, if applicable for any integrated components or controllers, are guaranteed until 13. aprila 2030.

9.3. Korisnička podrška

For technical assistance, warranty claims, or further inquiries, please contact Sharkoon customer support through their official website or the retailer where the product was purchased. Have your product model and proof of purchase ready when contacting support.