1. Uvod
This manual provides instructions for the installation, operation, and maintenance of your Hunter Builder Plus 51111 52-inch Indoor Ceiling Fan with LED Lights. This traditional ceiling fan is designed to complement various room aesthetics while providing efficient air circulation and lighting. It features a Whisper Wind motor for quiet performance and dimmable LED bulbs for adjustable ambiance. The fan includes a three-position mounting system for versatile installation and reversible blades for seasonal use.

Figure 1: Hunter Builder Plus 51111 52-inch Ceiling Fan. An overhead view of the Hunter Builder Plus 51111 ceiling fan, showcasing its brushed nickel motor housing, five light wood-grain blades, and three frosted glass light shades.
2. Sigurnosne informacije
Read and understand all instructions before beginning installation. Failure to follow these instructions may result in electric shock, fire, or personal injury.
- električna sigurnost: Always disconnect power at the main circuit breaker or fuse box before starting installation or performing any maintenance. Ensure all electrical connections comply with local codes and ordinances. If you are unfamiliar with electrical wiring, consult a qualified electrician.
- Montaža: The fan must be mounted to a structurally sound ceiling joist or an outlet box rated for fan support (at least 35 lbs). Ensure the mounting location can support the fan's weight.
- Razmak od oštrice: Maintain a minimum clearance of 7 feet from the floor to the bottom edge of the fan blades. Ensure there is adequate clearance from walls and other obstructions to prevent injury or damage.
- Rad ventilatora: Ne stavljajte predmete u putanju lopatica ventilatora dok ventilator radi.
- Light Kit: Koristite samo navedenu vrstu i snagu sijalicetage. Allow bulbs to cool before replacing.
3. Sadržaj paketa
Verify that all components listed below are included in your package before beginning installation. If any parts are missing or damaged, contact Hunter customer support.
- Sklop kućišta motora
- 5 lopatica ventilatora (reverzibilna završna obrada)
- Blade Brackets
- Light Kit Assembly with 3 Frosted Glass Shades
- LED Light Bulbs (3 included)
- Nadstrešnica i nosač za montažu
- 2-inčna donja šipka
- 3-inčna donja šipka
- Paket hardvera (vijci, podloške, matice)
- Pull Chains (for fan speed and light control)
4. Podešavanje i instalacija
Slijedite ove korake za pravilnu instalaciju vašeg stropnog ventilatora. Preporučuje se da instalaciju obavljaju dvije osobe.
- Isključite napajanje: Before starting, ensure power is disconnected at the circuit breaker or fuse box to prevent electrical shock.
- Instalirajte nosač za montažu: Secure the mounting bracket to the ceiling outlet box. Ensure the outlet box is rated for ceiling fan support (minimum 35 lbs) and is securely fastened to a building structure.
- Sastavite silaznu šipku: Choose the appropriate downrod (2-inch or 3-inch) for your ceiling height. Feed the electrical wires from the fan motor through the downrod.
- Sklop visećeg ventilatora: Carefully lift the fan motor assembly and place the downrod ball into the mounting bracket. Ensure the tab in the mounting bracket aligns with the slot in the downrod ball.
- Ožičenje ventilatora: Connect the electrical wires from the fan to the house wiring according to the wiring diagram provided in the full instruction manual (not included here). Ensure all connections are secure with wire nuts.
- Sigurna nadstrešnica: Pomaknite nadstrešnicu do plafona i pričvrstite je na nosač pomoću priloženih vijaka.
- Pričvrstite lopatice ventilatora: Attach each fan blade to its blade bracket using the provided screws. Then, attach the blade assemblies to the motor housing. The blades feature a reversible finish (light wood-grain and darker wood-grain); choose your preferred side.
- Instalirajte komplet rasvjete: Connect the light kit wiring to the fan motor wiring. Secure the light kit assembly to the bottom of the fan motor housing. Install the three LED bulbs and then attach the frosted glass shades.
- Attach Pull Chains: Thread the decorative pull chains through the designated holes in the light kit.
- Vrati snagu: Nakon završetka instalacije, ponovo uključite napajanje na prekidaču.

Figure 2: Fan installed in a bedroom. The Hunter Builder Plus 51111 ceiling fan mounted in a modern bedroom setting, demonstrating its aesthetic integration and size within a living space.

Figure 3: Fan installed in a living room. The Hunter Builder Plus 51111 ceiling fan installed in a spacious living room, highlighting its suitability for larger common areas.
5. Uputstvo za upotrebu
Your Hunter Builder Plus 51111 ceiling fan is designed for ease of use with pull chain controls.
Kontrola brzine ventilatora
The fan speed is controlled by one of the pull chains. Each pull will cycle through the available speeds (High, Medium, Low, Off). Pull the chain until you reach your desired fan speed.
Kontrola svjetla
The light kit is controlled by the other pull chain. Pull the chain to turn the lights On or Off. The included LED bulbs are dimmable, allowing you to adjust the light intensity (dimming functionality may require specific wiring or a compatible dimmer switch, consult a qualified electrician if unsure).

Figure 4: Close-up of fan controls. A detailed view of the central motor housing and light kit of the Hunter Builder Plus 51111 fan, showing the brushed nickel finish, frosted glass shades, and the two pull chains for fan speed and light control.
Funkcija reverzibilnog motora
The fan features a reversible motor for year-round comfort. A switch on the fan motor housing allows you to change the direction of blade rotation.
- Summer Operation (Downdraft): Set the switch to allow the blades to rotate counter-clockwise, creating a downdraft that produces a cooling breeze.
- Winter Operation (Updraft): Set the switch to allow the blades to rotate clockwise, creating an updraft that circulates warm air trapped near the ceiling, helping to warm the room.
Always turn off the fan and wait for the blades to stop completely before changing the direction of the motor.

Figure 5: Light wood-grain blade finish. A close-up image of one of the fan blades, featuring a light wood-grain texture on one side.

Figure 6: Dark wood-grain blade finish. A close-up image of one of the fan blades, featuring a darker wood-grain texture on the reverse side, indicating reversible blade finishes.
6. Održavanje
Redovno održavanje osigurava optimalne performanse i dugotrajnost vašeg stropnog ventilatora.
- čišćenje: Za čišćenje ventilatora, obrišite ga mekom,amp krpom. Ne koristite abrazivna sredstva za čišćenje ili rastvarače, jer mogu oštetiti završnu obradu.
- Čišćenje oštrice: Dust the fan blades regularly to prevent dust buildup, which can affect fan balance and performance.
- Zamjena sijalice: Ensure power is off before replacing LED bulbs. Allow bulbs to cool completely. Replace with LED bulbs of the same type and wattage (6.5 watts, 1800 lumens, 3000 Kelvin, 120 volts).
- Zategnite pričvršćivače: Periodically check and tighten all screws and fasteners on the fan blades and mounting hardware to ensure secure operation.
7. Otkrivanje problema
Ako imate problema sa stropnim ventilatorom, pogledajte sljedeće uobičajene probleme i rješenja:
| Problem | Mogući uzrok | Rješenje |
|---|---|---|
| Ventilator se ne pokreće | No power to the fan; Loose wire connections; Motor switch not engaged. | Check circuit breaker/fuse; Ensure all wire connections are secure; Verify the motor reverse switch is fully engaged in either direction. |
| Ventilator se ljulja | Labavi vijci noža; Neuravnoteženi noževi; Labav nosač za montažu. | Tighten all blade screws; Use a balancing kit (sold separately) to balance blades; Ensure mounting bracket is securely fastened to the ceiling joist. |
| Svetlo ne radi | Loose bulb; Faulty bulb; Loose wire connection in light kit. | Ensure bulbs are screwed in tightly; Replace bulbs; Check light kit wiring connections. |
| Bučan rad | Labavi vijci; Zujanje motora; Lopatice udaraju u prepreku. | Tighten all screws; Ensure canopy is not vibrating against the ceiling; Check for any obstructions in the blade path. |
8. Specifikacije
| Brand | Hunter |
| Naziv modela | Builder Plus |
| Broj modela | 51111 |
| Dimenzije proizvoda | 52"D x 52"Š x 18.06"H |
| Boja | Brushed Nickel finish |
| Broj oštrica | 5 |
| Tip prekidača | Povucite lanac |
| Izvor napajanja | AC |
| Voltage | 120 Volts |
| Wattage (Light Kit) | 6.5 vati (po sijalici) |
| Luminous Flux | 1800 lumena |
| Tip sijalice | LED |
| Unutrašnja/vanjska upotreba | Indoor |
| Težina artikla | 18.96 funti |
| UPC | 049694511119 |
9. Informacije o garanciji
Your Hunter Builder Plus 51111 ceiling fan comes with a Limited Lifetime Motor Warranty. This warranty is backed by Hunter Fan Company, a manufacturer with over 130 years of experience in the fan business. For specific terms and conditions, please refer to the warranty documentation included with your product or visit the official Hunter website.
10. Korisnička podrška
For further assistance, troubleshooting, or to inquire about replacement parts, please contact Hunter customer support. You can find contact information on the official Hunter weblokaciji ili unutar materijala za pakovanje.
Visit the official Hunter store for more information: Hunter Fan Company Store





