1. Uvod
Thank you for choosing the Memphis Audio VIV1100.1 SixFive Series Mono Subwoofer Amplifier. Ovo amplifier is designed to deliver powerful and clear bass performance for your car audio system. This manual provides essential information for proper installation, operation, and maintenance to ensure optimal performance and longevity of your amplifier.
2. Sigurnosne informacije
WARNING: Improper installation or use of this product can result in serious injury or death. Read and understand all instructions before installing or using this product.
- Uvijek isključite negativni pol akumulatora vozila prije početka bilo kakve instalacije.
- Ensure all wiring is properly routed and secured to prevent damage from moving parts or sharp edges.
- Koristite ožičenje odgovarajućeg presjeka za napajanje, uzemljenje i priključke zvučnika kako je navedeno u ovom priručniku.
- Nemojte montirati ampuređaj na mjestima izloženim direktnoj sunčevoj svjetlosti, prekomjernoj toplini, vlazi ili prašini.
- Nikada nemojte rukovati amplifier with damaged wiring or if it emits smoke or unusual odors. Immediately disconnect power and consult a qualified technician.
- Za optimalne performanse i sigurnost preporučuje se profesionalna instalacija.
3. Sadržaj paketa
Provjerite da li vaš paket sadrži sljedeće stavke:
- Memphis Audio VIV1100.1 Mono Subwoofer Amplifier
- Pribor za montažu (vijci)
- Uputstvo za upotrebu (ovaj dokument)
- Remote Bass Knob (if included with your model)
4. Podešavanje i instalacija
4.1 Montiranje Amplifier
Choose a mounting location that is dry, well-ventilated, and away from direct heat sources. Ensure there is sufficient airflow around the amplifier for cooling. Secure the amplifier firmly using the provided mounting hardware.
4.2 Ožičenje
All wiring connections must be secure and properly insulated. Refer to the diagrams below for correct wiring procedures.
Slika 1: Priključci na zadnjoj ploči. This image displays the rear panel of the VIV1100.1 amplifier, highlighting the power input terminals (B+, GND, REM), RCA input/output jacks, and speaker output terminals. Also visible are the 'AUTO TURN ON' switch, 'INPUT LEVEL' switch, and 'PROTECT' indicator.
4.2.1 Priključci za napajanje
- B+ (12V Power): Connect a heavy-gauge power cable (e.g., 4 AWG or larger, depending on installation) directly from the positive terminal of the vehicle's battery. Install an appropriate fuse (not supplied) within 18 inches of the battery.
- GND (uzemljenje): Connect a heavy-gauge ground cable of the same size as the power cable to a clean, unpainted metal surface of the vehicle chassis. Ensure a good electrical connection.
- REM (Daljinsko uključivanje): Connect a 18-gauge wire from the remote turn-on output of your head unit to this terminal. This wire turns the ampuključivanje i isključivanje plamenika pomoću vaše glavne jedinice.
4.2.2 Ulazne veze
Spojite RCA izlaze vaše glavne jedinice na amplifier's RCA INPUT jacks. If your head unit does not have RCA outputs, use the high-level input option if available (refer to the 'INPUT LEVEL' switch).
4.2.3 Priključci zvučnika
Povežite subwoofer(e) na amplifier's SPEAKER terminals. Ensure correct polarity (+ to + and - to -). This is a mono amplifier, designed for a single subwoofer or multiple subwoofers wired to a single channel. Refer to your subwoofer's specifications for impedance matching.
4.3 Amplifier Controls and Adjustments
The VIV1100.1 amplifier features various controls for fine-tuning your audio system. Adjust these settings carefully to achieve optimal sound quality.
Slika 2: Kontrole na gornjoj ploči. This image illustrates the top control panel of the VIV1100.1 amplifier, detailing the adjustable knobs for GAIN, SUB-SONIC filter, X-OVER (low-pass crossover), CENTER FREQ, Q, BASS BOOST, and the LED COLOR selector.
- DOBITAK: Podešava ulaznu osetljivost amplifier to match the output of your head unit. Start with the gain at minimum and slowly increase until desired volume is reached without distortion.
- SUB-SONIC Filter (24dB Per Octave): Filters out extremely low frequencies that are inaudible and can damage subwoofers. Set this just below the lowest frequency your subwoofer can reproduce effectively.
- X-OVER (Low Pass Crossover - 48dB Per Octave): Controls the upper frequency limit of the amplifier's output. Set this to allow only bass frequencies to pass to the subwoofer.
- CENTER FREQ & Q: These controls are part of the M-Equalization™ system, allowing for precise tuning of a specific frequency band. Adjust the CENTER FREQ to select the frequency and Q to adjust the bandwidth of the boost/cut.
- BASS BOOST: Provides an adjustable boost to bass frequencies. Use sparingly to avoid distortion and potential speaker damage.
- LED COLOR: Selects the color of the amplifier's LED panel. This amplifier features 7 selectable colors.
5. Uputstvo za upotrebu
Once properly installed and configured, the amplifier will turn on automatically when your head unit is powered on (via the remote turn-on wire or DC offset sensing if 'AUTO TURN ON' is enabled). The LED indicator will illuminate to show operational status.
- Uključeno: The amplifier will power on when the remote turn-on signal is received.
- LED indikator: The LED panel will display the selected color during normal operation. If the amplifier enters protection mode, the LED may change color or turn off (refer to Troubleshooting).
- Kontrola jačine zvuka: Adjust the overall system volume using your head unit. The amplifier's gain control should be set once and not used as a volume control.
6. Održavanje
The Memphis Audio VIV1100.1 ampSpajalica zahtijeva minimalno održavanje. Slijedite ove smjernice kako biste osigurali kontinuiranu performansu:
- čišćenje: Povremeno obrišite ampVanjski dio uređaja obrišite mekom, suhom krpom. Ne koristite jake hemikalije ili abrazivna sredstva za čišćenje.
- inspekcija: Regularly check all wiring connections for tightness and signs of corrosion or damage. Ensure adequate ventilation around the amplifier.
- Izbjegavajte prepreke: Ne stavljajte predmete na vrh amplifier that could block airflow to the heat sinks.
7. Otkrivanje problema
Ako imate problema sa svojim amplifier, consult the following troubleshooting guide before contacting support.
| Problem | Mogući uzrok | Rješenje |
|---|---|---|
| No Power / No LED | Pregoreni osigurač, loša veza sa napajanjem/uzemljenjem, nema signala za daljinsko uključivanje. | Check inline fuse near battery. Verify power, ground, and remote wire connections. Ensure head unit is on. |
| Protection Mode (LED changes/off) | Pregrijavanje, kratki spoj zvučnika, preniska impedancija, DC ofset. | Dozvoli amplifier to cool. Check speaker wiring for shorts. Verify speaker impedance is within amplifier's limits. Disconnect inputs to check for DC offset. |
| Nema izlaza zvuka | No input signal, incorrect gain setting, speaker wires disconnected. | Check RCA input cables. Adjust gain. Verify speaker connections. Ensure head unit is playing audio. |
| Distorted Sound | Gain set too high, improper crossover settings, damaged speaker. | Reduce gain. Adjust crossover and bass boost settings. Test with a different speaker if possible. |
| Buka / Zujanje motora | Poor ground connection, RCA cables routed near power wires, ground loop. | Osigurati amplifier and head unit have solid, separate ground points. Reroute RCA cables away from power wires. Use a ground loop isolator if necessary. |
8. Specifikacije
The following are key specifications for the Memphis Audio VIV1100.1 SixFive Series Mono Subwoofer Ampdizalica:
- Broj modela: VIV1101 0 (VIV1100.1)
- Izlazna snaga: 1,100 watts RMS x 1 at 1 ohm (typical)
- Podzvučni filter: 24dB Per Octave
- Niskopropusni prelaz: 48dB Per Octave
- Digitalna obrada signala: Da
- završiti: Angel Hair Anodized
- LED panel: 7 Color Selectable Color Changing LED Panel
- Vrsta montaže: Door mount (refer to installation guidelines for secure mounting)
- UPC: 841992149113
- Datum prve dostupnosti: 23. jul 2020
9. Jamstvo i podrška
9.1 Informacije o garanciji
This Memphis Audio VIV1100.1 ampLifier dolazi sa a 90-dnevna ograničena garancija. This warranty covers defects in materials and workmanship under normal use. It does not cover damage caused by improper installation, accident, misuse, abuse, neglect, unauthorized modification, or normal wear and tear. Please retain your proof of purchase for warranty claims.
9.2 Korisnička podrška
For technical assistance, warranty service, or questions regarding your Memphis Audio VIV1100.1 amplifier, please contact your authorized Memphis Audio dealer or visit the official Memphis Audio website for support resources. When contacting support, please have your product model number and purchase information readily available.
