FOXWELL NT614 Elite OBD2 skener - uputstvo za upotrebu

1. Uvod

The FOXWELL NT614 Elite is an advanced OBD2 diagnostic scanner designed for comprehensive vehicle system analysis and maintenance. This device provides access to engine, Anti-lock Braking System (ABS), Supplemental Restraint System (SRS), and Transmission diagnostics, in addition to five key service reset functions. This manual outlines the proper procedures for setting up, operating, and maintaining your NT614 Elite scanner.

Figure 1.1: The FOXWELL NT614 Elite OBD2 Scanner and its protective case.

2. Proizvod je gotovview

2.1 Ključne karakteristike

• 4-Dijagnostika sistema: Reads and clears fault codes, and displays live data for Engine, ABS, SRS, and Transmission systems.
• 5 Service Reset Functions: Includes ABS Bleeding, Oil Reset, Steering Angle Sensor (SAS) Calibration, Electronic Parking Brake (EPB) Reset, and Throttle Reset.
• Potpune OBD2 funkcije: Supports all 10 OBD2 test modes, including I/M Readiness, Live Data Stream, Freeze Frame, O2 Sensor Test, On-Board Monitor Test, Component Test, and Vehicle Information retrieval.
• Lifetime Free WiFi Updates: Provides continuous software updates via WiFi for expanded vehicle coverage and new features.
• Test baterije: Prikazuje zapreminu baterije u realnom vremenutage for health assessment.
• AutoVIN: Automatically identifies vehicle information for quicker diagnostics (manual VIN entry required for some vehicles).
• DTC pretraga: Built-in library for quick fault code definitions.
• Grafikon podataka uživo: Displays multiple data streams simultaneously in graphical format.

2.2 Šta je uključeno

The package for the FOXWELL NT614 Elite includes the following components:

• 1x NT614 Elite Scanner Unit
• 1x Zaštitna torbica
• 1x Diagnostic Cable (OBDII 16-pin)
• 1x USB kabl
• 1x uputstvo za upotrebu
• 1x kratki vodič

Figure 2.1: Contents of the NT614 Elite package.

3. Podešavanje

Follow these steps to prepare your NT614 Elite scanner for use:

1. Povežite se s vozilom: Locate your vehicle's OBDII port, typically found under the dashboard on the driver's side. Plug the diagnostic cable (16-pin) from the NT614 Elite into the vehicle's OBDII port.
2. Uključeno vozilo: Turn the vehicle's ignition to the 'ON' position without starting the engine. This provides power to the OBDII port and the scanner.
3. Scanner Initialization: The NT614 Elite will power on automatically. Follow the on-screen prompts to begin diagnosis or select desired functions.

Figure 3.1: Connection steps for the NT614 Elite scanner.

4. Uputstvo za upotrebu

4.1 4-System Diagnosis (Engine, ABS, SRS, Transmission)

The NT614 Elite can diagnose four core vehicle systems:

• Sistem motora: Reads and clears fault codes, displays real-time operating status, and turns off warning lights to ensure proper engine function.
• ABS sistem: Diagnoses issues causing ABS warning lights, reads and clears ABS error codes, and helps prevent wheel locking and skidding.
• SRS sistem: Accesses electronic parameters in the airbag system to diagnose malfunctions and locate faulty components, ensuring safety system functionality.
• Sistem prenosa: Reads and clears diagnostic codes from the transmission system, and displays live data to assess speed and load matching with transmission output.

Slika 4.1: Gotovoview of 4-System Diagnosis capabilities.

4.2 5 Service Reset Functions

The NT614 Elite provides five essential maintenance reset functions:

• Krvarenje iz ABS-a: Safely removes air from the brake system after component replacement, restoring firm brake pedal feel.
• Resetovanje EPB-a: Allows service and maintenance of electronic parking brake systems, including deactivation, activation, bleeding brake fluid, and setting brakes after pad replacement.
• Resetiranje ulja: Resets the oil life reminder and switches off the oil light after an oil change, ensuring accurate engine oil life calculation.
• SAS kalibracija: Resets the steering angle sensor to its relative zero position, helping to clear incorrect memory and calibrate the sensor.
• Resetovanje gasa: Performs throttle body relearn (Idle Relearn) to achieve smooth idle speed after replacing electronic throttle body, disconnecting battery, or clearing a check engine light.

Figure 4.2: Visual representation of the 5 Hot Reset functions.

4.3 Potpune OBD2 funkcije

The NT614 Elite supports all standard OBD2 functions, enabling comprehensive emissions-related diagnostics:

• Pročitajte kodove (DTC)
• Clear Codes (DTCs)
• Status spremnosti I/M
• Prijenos podataka uživo
• Zamrzni okvir podataka
• Test O2 senzora
• Test ugrađenog monitora
• Test komponenata
• Retrieve Vehicle Information (VIN, CIN, CVN)
• EVAP Test (Evaporative Emission System Test)

Slika 4.3: Gotovoview of Full OBD2 Functions.

4.4 Live Data Graphing

The scanner can display multiple live data streams simultaneously in graphical format, allowing for visual analysis of vehicle performance parameters such as RPM, speed, transmission temperature, and fuel system status.

Figure 4.4: Live Data Graphing interface.

4.5 DTC biblioteka

Access fault code meanings quickly through the exclusive built-in DTC library menu for faster identification of issues.

Figure 4.5: DTC Library feature.

4.6 Battery Health Check

The NT614 Elite can display real-time battery voltage, allowing you to monitor the vehicle's battery health.

Figure 4.6: Battery Health Check display.

5. Održavanje

5.1 Ažuriranja softvera

The NT614 Elite supports lifetime free software updates via WiFi. Regular updates ensure expanded vehicle coverage, bug fixes, and new features. To update the software:

1. Navigate to the 'Settings' menu on the scanner.
2. Select 'WiFi' and connect to an available wireless network.
3. Once connected, select 'Update' from the main menu or settings.
4. Choose the software packages you wish to update and follow the on-screen instructions.

Figure 5.1: Steps for performing a WiFi software update.

6. Otkrivanje problema

If you encounter issues with your NT614 Elite scanner, consider the following:

• Nema napajanja: Ensure the diagnostic cable is securely connected to both the scanner and the vehicle's OBDII port. Verify the vehicle's ignition is in the 'ON' position.
• Greška u komunikaciji: Check that the vehicle's ignition is on. Ensure the diagnostic cable is not damaged. Try connecting to a different vehicle to rule out a vehicle-specific issue.
• Problemi s ažuriranjem softvera: Verify a stable WiFi connection. Ensure sufficient battery charge on the scanner. If issues persist, contact technical support.
• Function Not Supported: Vehicle compatibility for specific functions (e.g., ABS Bleeding) varies by make, model, and year. Refer to the compatibility list on the FOXWELL website or contact support for verification.

For further assistance, refer to the support section of the FOXWELL websajtu ili kontaktirajte korisničku podršku.

7. Specifikacije

Figure 7.1: Product label with detailed specifications.

8. Informacije o kompatibilnosti

The NT614 Elite is compatible with over 10,000 vehicle models from more than 90 brands, including cars, SUVs, minivans, and light trucks. Compatibility for specific functions may vary by vehicle make, model, and year.

To check specific vehicle compatibility:

1. Visit the official FOXWELL website (foxwelltech.us).
2. Navigate to the 'Support' section and select 'Coverage List'.
3. Enter 'NT614 Elite' as the product model.
4. Select your vehicle's brand, model, and year to view compatible functions.

Figure 8.1: Broad vehicle compatibility of the NT614 Elite.

Figure 8.2: Guide to checking vehicle compatibility online.

9. Garancija i podrška

The FOXWELL NT614 Elite comes with a 2-year reliable warranty. FOXWELL provides lifetime free software updates and 24-hour technical support to assist with any product-related inquiries or issues.

For technical support, please visit the official FOXWELL webstranice ili kontaktirajte njihov tim za korisničku podršku.

Slika 9.1: Informacije o garanciji i podršci.