1. Uvod
This manual provides essential instructions for the safe and efficient operation of your Renkforce PRO3 3D Printer, model RF-4318370. Please read this manual thoroughly before using the device to ensure proper setup, operation, and maintenance. Retain this manual for future reference.
2. Sigurnosna uputstva
Pridržavajte se sljedećih sigurnosnih mjera opreza kako biste spriječili ozljede ili oštećenje pisača:
- visoka temperatura: The print nozzle and print bed reach high temperatures during operation. Avoid touching these components directly to prevent burns. Allow the printer to cool down before performing maintenance.
- Pokretni dijelovi: The printer contains moving parts that can cause injury. Keep hands, hair, and loose clothing away from the print head and other moving components during operation.
- električna sigurnost: Connect the printer to a grounded power outlet. Do not operate the printer with damaged power cords or plugs. Disconnect power before cleaning or servicing.
- ventilacija: Koristite štampač u dobro prozračenom prostoru, posebno kada štampate s materijalima koji mogu ispuštati isparenja.
- Djeca i kućni ljubimci: Držite štampač van domašaja dece i kućnih ljubimaca.
- Zapaljivi materijali: Do not place flammable materials near the printer during operation.
3. Sadržaj paketa
Prilikom raspakivanja, provjerite da li su sve komponente prisutne i neoštećene:
- Renkforce PRO3 3D Printer (1 unit)
- Power Cable
- Filament Spool (starter)
- USB kabl (za povezivanje sa računarom)
- Tools and Accessories (e.g., spatula, pliers, spare nozzle, SD card)
- Korisnički priručnik (ovaj dokument)
Ako bilo koji artikl nedostaje ili je oštećen, odmah se obratite prodavaču.
4. Proizvod je gotovview
Familiarize yourself with the main components of your Renkforce PRO3 3D Printer.
Slika 4.1: Front view of the Renkforce PRO3 3D Printer. This image displays the printer's overall design, including the enclosed print chamber, the print head mechanism, the build plate, and the integrated control panel located at the base of the unit. The filament guide tube is visible at the top.
Slika 4.2: Ugao view of the Renkforce PRO3 3D Printer. This perspective shows the printer's black front frame and white side panels, offering a clearer view of the internal structure, including the linear rails, print head, and heated build plate. The control panel is also visible.
Slika 4.3: Close-up of the print head and build plate during operation. This image focuses on the extruder assembly, the heated build plate, and a small yellow 3D-printed object being created. A "Caution high temperature" warning label is visible on the build plate.
Slika 4.4: Detaljno view of the extruder and hotend assembly. This close-up highlights the components responsible for melting and extruding filament, including the cooling fans, heat sink, and nozzle. A "Caution high temperature" warning is prominently displayed on the hotend.
5. Podešavanje
Follow these steps to set up your Renkforce PRO3 3D Printer:
- Raspakivanje: Carefully remove the printer from its packaging. Remove all protective foam, tape, and ties.
- plasman: Place the printer on a stable, level surface in a well-ventilated area, away from direct sunlight and heat sources.
- Priključak za napajanje: Connect the power cable to the printer and then to a grounded electrical outlet. Do not power on yet.
- Učitavanje filamenta:
- Mount the filament spool onto the designated holder.
- Feed the filament through the guide tube and into the extruder mechanism.
- Follow the on-screen instructions or manual controls to preheat the nozzle and load the filament until it extrudes smoothly.
- Build Plate Leveling: Ensure the build plate is properly leveled. Refer to the printer's control panel menu for the auto-leveling function or manual leveling instructions. Proper leveling is crucial for successful prints.
- Instalacija softvera: Install the necessary 3D printing software (slicer) on your personal computer (compatible with Windows operating systems). This software converts 3D models into printable instructions (G-code).
6. Uputstvo za upotrebu
Once set up, you can begin your first print:
- Pripremite 3D model: Obtain or create a 3D model file (e.g., .STL, .OBJ).
- Isjeci model: Open the 3D model in your slicing software. Configure print settings such as layer height, infill, print speed, and support structures. The software will generate a G-code file.
- Prijenos G-koda: Sačuvajte G-kod file to an SD card or transfer it directly to the printer via USB (if supported by your software and printer connection type, which is RF for this model).
- Započni štampanje: Insert the SD card into the printer. Navigate the printer's control panel to select the G-code file and start the print.
- Ispis na monitoru: Observe the first few layers to ensure proper adhesion and extrusion. Monitor the print progress periodically.
- Ukloni ispis: Once the print is complete and the build plate has cooled, carefully remove the printed object using the provided spatula.
7. Održavanje
Regular maintenance ensures optimal performance and longevity of your printer:
- Čista ploča za izradu: After each print, clean the build plate to remove any residue. Use isopropyl alcohol for best results.
- Čišćenje mlaznica: Periodically clean the nozzle to prevent clogs. A brass brush can be used for external cleaning, or a needle for internal clogs (when hot).
- Podmažite pokretne dijelove: Apply a small amount of lubricant to the linear rods and lead screws every few months to ensure smooth movement.
- Provjerite pojaseve: Ensure the timing belts are properly tensioned. They should be taut but not overly tight.
- Ažuriranja firmvera: Provjerite proizvođača website for any available firmware updates to improve printer performance and add features.
8. Otkrivanje problema
Evo rješenja za uobičajene probleme s kojima se možete susresti:
| Problem | Mogući uzrok | Rješenje |
|---|---|---|
| Filament se ne ekstrudira | Začepljena mlaznica, neispravna temperatura, zapetljana nit. | Clean the nozzle, verify print temperature settings, ensure filament spool unwinds freely. |
| Slabo prianjanje na podlogu | Unleveled bed, dirty build plate, incorrect bed temperature. | Re-level the build plate, clean the surface with isopropyl alcohol, adjust bed temperature in slicer settings. |
| Layer shifting | Loose belts, print head hitting print, excessive print speed. | Check and tension belts, ensure no obstructions, reduce print speed. |
| Nizanje/Cijeđenje | Nepravilna podešavanja uvlačenja, previsoka temperatura mlaznice. | Adjust retraction distance and speed in slicer, slightly lower nozzle temperature. |
For further assistance, consult online resources or contact Renkforce customer support.
9. Specifikacije
Key technical specifications for the Renkforce PRO3 3D Printer (Model RF-4318370):
- Brand: Renkforce
- Broj modela: RF-4318370
- Boja: Crno/bijelo
- Kompatibilni operativni sistem: Windows
- Tehnologija povezivanja: RF (Radio Frequency, likely for wireless communication or specific interface)
- Kompatibilni uređaji: Personal Computer
- Kompatibilni materijali: Polylactic Acid (PLA), ABS (Acrylonitrile Butadiene Styrene)
- Dimenzije proizvoda (D x Š x V): 54 cm x 54 cm x 58 cm
- Težina artikla: 22.2 kilograma
10. Garancija i podrška
Specific warranty information for the Renkforce PRO3 3D Printer is not available in this document. Please refer to the warranty card included with your product packaging or visit the official Renkforce webstranicu za detaljne uslove i odredbe garancije.
For technical support, troubleshooting beyond this manual, or spare parts inquiries, please contact Renkforce customer service through their official channels.
