Maxtrack CS 1-5 L

Maxtrack 5-Way HDMI Switch CS 1-5 L User Manual

Model: CS 1-5 L

1. Uvod

The Maxtrack 5-Way HDMI Switch (Model CS 1-5 L) is designed to connect up to five HDMI source devices to a single HDMI display. This device allows for easy switching between multiple HDMI sources such as game consoles, Blu-ray players, and streaming boxes, eliminating the need to constantly reconnect cables. It supports 4K resolution at 30Hz, Full HD, 3D, and HDCP, ensuring high-quality video and audio transmission.

2. Sadržaj paketa

Molimo Vas da provjerite paket za sljedeće stavke:

Maxtrack 5-Way HDMI Switch packaging

Figure 2.1: Product packaging showing the HDMI switch, remote, and cables.

3. Značajke proizvoda

Front view of Maxtrack 5-Way HDMI Switch with Input 1, Input 5, and Output ports

Slika 3.1: Prednja strana view of the HDMI switch showing Input 1, Input 5, and Output ports.

Side view of Maxtrack 5-Way HDMI Switch with Input 2, Input 3, and Input 4 ports

Slika 3.2: Bočna strana view of the HDMI switch showing Input 2, Input 3, and Input 4 ports.

4. Podešavanje

Follow these steps to set up your Maxtrack 5-Way HDMI Switch:

  1. Povežite HDMI izvorne uređaje: Connect up to five HDMI source devices (e.g., game console, Blu-ray player) to the HDMI Input ports (IN PUT 1-5) on the switch using HDMI cables.
  2. Poveži se sa ekranom: Connect one end of an HDMI cable to the HDMI Output port (OUT PUT) on the switch and the other end to the HDMI input of your display (TV, monitor, projector).
  3. Povežite IR prijemnik: Plug the IR Receiver Cable into the designated IR port on the HDMI switch. Position the IR receiver in a location where it can receive signals from the remote control.
  4. Priključite napajanje: Connect the USB Power Cable to the power input port on the HDMI switch. Plug the other end of the USB cable into a USB power source (e.g., a USB port on your TV, a USB wall adapter).
  5. Uključeno: Ensure all connected devices and the display are powered on.
Maxtrack 5-Way HDMI Switch connected with IR receiver cable and USB power cable

Figure 4.1: HDMI switch with IR receiver and USB power cable connected.

Close-up of the IR receiver cable

Figure 4.2: The IR receiver cable.

Close-up of the USB power cable

Figure 4.3: The USB power cable.

5. Uputstvo za upotrebu

Once the setup is complete, you can switch between your connected HDMI devices using one of two methods:

5.1 Using the Button on the Device

5.2 Korištenje IR daljinskog upravljača

Maxtrack HDMI Switch remote control with numbered buttons

Figure 5.1: The IR remote control for the HDMI switch.

6. Održavanje

To ensure the longevity and optimal performance of your HDMI switch, follow these maintenance guidelines:

7. Otkrivanje problema

If you encounter issues with your Maxtrack 5-Way HDMI Switch, refer to the following common problems and solutions:

ProblemMogući uzrokRješenje
Nema signala na ekranu.
  • Labavi priključci HDMI kabla.
  • Incorrect input selected on switch or display.
  • Power issue with the switch.
  • Nekompatibilna rezolucija/brzina osvježavanja.
  • Provjerite jesu li svi HDMI kablovi sigurno spojeni.
  • Verify the correct input is selected on both the HDMI switch and your display.
  • Check if the USB power cable is properly connected and receiving power.
  • Try a different HDMI cable or reduce the resolution/refresh rate of the source device if possible.
Daljinski upravljač ne radi.
  • IR receiver not properly connected or positioned.
  • Prepreka između daljinskog upravljača i IR prijemnika.
  • Baterija daljinskog upravljača je prazna.
  • Ensure the IR receiver cable is fully plugged in and positioned to have a clear line of sight to the remote.
  • Remove any objects blocking the path between the remote and the IR receiver.
  • Zamijenite bateriju u daljinskom upravljaču.
Flickering or distorted image.
  • HDMI kablovi lošeg kvaliteta.
  • Dužina kabla je predugačka.
  • Interferencija.
  • Koristite visokokvalitetne, certificirane HDMI kablove.
  • Pokušajte s kraćim HDMI kablovima ako je moguće.
  • Ensure the switch is not placed near devices that emit strong electromagnetic interference.

8. Specifikacije

FeatureDetalj
Broj modelaCS 1-5 L
BrandMaxtrack
Inputs5 x HDMI
Izlaz1 x HDMI
Podržane rezolucijeUp to 4K @ 30Hz, Full HD (1080p), 3D
Podrška za HDCPDa
Duboka boja48-bitni
Bandwidth340 MHz
Brzina prenosa podataka10.2 Gbps
Audio formatiSupports uncompressed audio (e.g., LPCM)
Kontrolne metodeManual button, IR Remote Control
Dimenzije proizvoda190D x 25W x 90H millimeters (19 x 2.5 x 9 cm)
Težina120 g
BojaCrna
Tip konektoraHDMI
Kompatibilni uređajiDVD Player, Gaming Console, Television

9. Garancija i podrška

Za informacije o garanciji i tehničku podršku, molimo pogledajte dokumentaciju koja je priložena uz kupovinu ili se obratite prodavaču. Sačuvajte dokaz o kupovini za bilo kakve reklamacije u vezi s garancijom.