Sharp digitalni alarm sa AccuSetom - Automatski pametni sat Korisnički priručnik

Uvod

This manual provides detailed instructions for the setup, operation, and maintenance of your Sharp Digital Alarm Clock with AccuSet. Designed for ease of use, this clock automatically sets the time, making it ideal for all users.

Sharp Digital Alarm Clock, front view, showing red LED display with time 12:08.

Slika 1: Prednja strana view of the Sharp Digital Alarm Clock.

Karakteristike proizvoda

AccuSet Automatic Time Set: Pre-programmed time for hassle-free setup.
Quick Daylight Savings Time (DST) Adjustment: Simple switch for DST changes.
High/Low Dimmer Control: Podesiva svjetlina ekrana.
Rezervna baterija: Pre-installed CR2032 battery for time settings retention during power outages.
Odabir vremenske zone: Easily select your local time zone.

Diagram showing key features of the Sharp Digital Alarm Clock: Large 0.9 inch Red LED Display, AccuSet Automatic Time Setting, High & Low Display Dimmer Control, Easy Set Top Button Controls, and Installed Battery Backup.

Figure 2: Key features of the Sharp Digital Alarm Clock.

Setup

1. Initial Power-Up and Time Zone Selection

Locate the time zone switch on the bottom of the clock.
Select your desired time zone (e.g., EST for Eastern Standard Time). The default is Eastern Standard Time.
Plug the clock into an approved electrical source. The AccuSet feature will automatically set the correct time.

2. Daylight Savings Time (DST) Adjustment

To adjust for Daylight Savings Time:

Slide the DST switch on the bottom of the clock to ON to add one hour (+1 hr).
For Standard Time, slide the switch to OFF to subtract one hour (-1 hr).

3. Izrada sigurnosne kopije baterije

The clock comes with a pre-installed CR2032 button cell battery. This battery retains time settings during power outages. It is located in a screw-secured compartment at the bottom of the clock.

Uputstvo za upotrebu

Top view of the Sharp Digital Alarm Clock showing button labels: DIMMER HI/LO, TIME SET, ALARM SET, SNOOZE, HOUR SET, MINUTE SET, ALARM ON/OFF. Also indicates PM indicator and ALARM indicator on the display.

Figure 3: Top panel controls and display indicators.

1. Postavljanje alarma

Pritisnite ALARM SET button once. The alarm time will flash on the display.
Pritisnite HOUR SET button to adjust the alarm hour. Observe the PM indicator for correct AM/PM setting.
Pritisnite MINUTE SET dugme za podešavanje minute alarma.
Pritisnite ALARM SET ponovo pritisnite dugme da biste potvrdili i izašli iz režima podešavanja alarma.

2. Turning Alarm On/Off

Da uključite alarm ON, pritisnite ALARM UKLJUČEN / ISKLJUČEN button. The alarm indicator light on the display will illuminate.
Da uključite alarm OFF, pritisnite ALARM UKLJUČEN / ISKLJUČEN button again. The alarm indicator light will turn off.

3. Funkcija odgode alarma

Kada se oglasi alarm, pritisnite veliko dugme SNOOZE dugme koje se nalazi na vrhu sata. Alarm će se privremeno zaustaviti i ponovo oglasiti nakon otprilike 9 minuta.

4. Dimmer Control

Za podešavanje svjetline LED displeja:

Pritisnite DIMMER HI/LO button to toggle between high and low brightness settings.

Close-up view of the Sharp Digital Alarm Clock display, highlighting the high and low dimmer control feature.

Figure 4: Display brightness adjustment.

Održavanje

Battery Replacement (CR2032)

The pre-installed CR2032 battery is designed to last for several years. If the clock loses time during a power outage, the battery may need replacement.

Unplug the clock from the electrical outlet.
Locate the screw-secured battery compartment on the bottom of the clock.
Unscrew the compartment cover and carefully remove the old CR2032 battery.
Insert a new CR2032 battery, ensuring the correct polarity (+ side up).
Vratite poklopac odjeljka i pričvrstite ga vijkom.
Plug the clock back into the electrical outlet.

Napomena: Stare baterije odlažite odgovorno u skladu sa lokalnim propisima.

Rješavanje problema

Problem	Mogući uzrok	Rješenje
Prikaz sata je prazan.	Nema struje.	Ensure the clock is securely plugged into a working electrical outlet. Check the power source.
Vrijeme je netačno.	Incorrect time zone selected; DST switch incorrect; Power interruption.	Verify the time zone switch on the bottom of the clock. Check the DST switch position. If power was interrupted, the AccuSet should reset the time; if not, check/replace backup battery.
Alarm se ne oglašava.	Alarm not activated; Incorrect alarm time set.	Ensure the alarm indicator light is on (press ALARM ON/OFF button). Verify the alarm time is set correctly.
Ekran je previše svijetao/tamn.	Dimmer setting needs adjustment.	Press the DIMMER HI/LO button to cycle through brightness settings.

Specifikacije

Brand: Sharp
Model: B089ZMSR39
Boja: Black-red Led
Vrsta prikaza: Digital
Posebna karakteristika: Automatsko podešavanje
Dimenzije proizvoda: 5.5 cm Š x 2.6 cm V
Izvor napajanja: Corded Electric
Rezervna baterija: 1 x CR2032 Lithium Ion (included)
Težina artikla: 10.2 unce
UPC: 049353004426
Proizvođač: Sharp

Diagram showing the dimensions of the Sharp Digital Alarm Clock: 5.5 inches wide, 2.6 inches high, and 2.45 inches deep. The display size is 0.9 inches.

Slika 5: Dimenzije proizvoda.

Dodatne informacije

For further assistance or product inquiries, please refer to the official Sharp webstranice ili kontaktirajte njihovu korisničku podršku.

Ovaj proizvod je dizajniran samo za upotrebu u zatvorenom prostoru.

	SHARP atomski zidni sat: podešavanje, karakteristike i uputstvo Sveobuhvatno uputstvo za upotrebu SHARP radio-kontrolisanog atomskog zidnog sata (Model SPC876), koje obuhvata podešavanje, postavke vremenske zone, ljetno računanje vremena, prijem signala, ručno podešavanje i informacije o garanciji.
	Upute i garancija za Sharp atomski sat SPC1019 Korisnički priručnik i informacije o garanciji za Sharp atomski sat SPC1019, detaljno podešavanje, podešavanje vremena, funkcije alarma i rješavanje problema.
	SHARP SPC971 Atomski zidni sat - uputstvo za upotrebu i uputstva Detaljna uputstva i sigurnosne informacije za SHARP SPC971 atomski zidni sat, postavljanje poklopca, zamjena baterija i rad.
	Sharp SPC1003/1005 Atomska meteorološka stanica - uputstvo za upotrebu Sveobuhvatni vodič za Sharp SPC1003/1005 atomsku meteorološku stanicu, koji detaljno opisuje karakteristike, podešavanje, kontrole i specifikacije za tačno praćenje vremena, vremenskih uslova i okoline.
	Sharp atomski zidni sat SPC971: Upute i garancija Uputstvo za upotrebu i informacije o garanciji za Sharp atomski zidni sat (Model SPC971), detaljno opisujući podešavanje, karakteristike i jednogodišnju ograničenu garanciju.
	Sharp SPC276 digitalni budilnik s Bluetoothom i zvukovima za spavanje: Korisnički priručnik Sveobuhvatan vodič za korištenje Sharp SPC276 digitalnog budilnika, koji pokriva funkcije, podešavanje, funkcije alarma, Bluetooth povezivanje, zvukove za spavanje i sigurnosne mjere.

Sharp B089ZMSR39