Uvod
This manual provides comprehensive instructions for setting up, operating, and maintaining your Sharp Digital Alarm Clock (Model SPC387). This clock features a clear red LED display, dual alarms, an ascending alarm volume, and battery backup for continued operation during power outages. Designed for ease of use, it is suitable for all users.
Slika 1: Prednja strana view of the Sharp Digital Alarm Clock, displaying 12:08 PM in red LEDs.
Karakteristike proizvoda
- Simple & Hassle-Free Operation: Designed for ease of use.
- Easy-Set Dual Alarms: Program two separate alarm times.
- Gentle Ascending Alarm: Jačina zvuka alarma se postepeno povećava.
- Rezervna kopija baterije: Maintains settings during power outages (requires 2x AA batteries, sold separately).
- Large Easy-Read Red LED Display: Bold, bright numbers for clear visibility.
Figure 2: Diagram illustrating the main features of the alarm clock, including the display size, dual alarm capability, ascending alarm, top controls, and battery backup option.
Uputstva za postavljanje
1. Priključak za napajanje
Plug the AC power cord into a standard 120V AC wall outlet. The display will illuminate, and the clock will be ready for time setting.
2. Instalacija rezervne baterije
For battery backup, open the battery compartment cover located on the bottom of the unit. Insert two (2) new AA batteries (not included), observing the correct polarity (+ and -). Close the battery compartment cover. The battery backup feature will maintain time and alarm settings during a power interruption, but the display will not be illuminated.
Figure 3: The underside of the alarm clock, showing the battery compartment for backup power.
Uputstvo za upotrebu
1. Postavljanje vremena
- Pritisnite i držite VRIJEME button. The time display will begin to flash.
- Dok držite VRIJEME dugme, pritisnite HOUR dugme za podešavanje sata. Pratite PM indikator za ispravno AM/PM podešavanje.
- Dok još držite VRIJEME dugme, pritisnite MINUTE tipku za podešavanje minuta.
- Otpustite VRIJEME dugme za podešavanje vremena.
2. Setting the Alarm (Dual Alarm)
This clock supports two independent alarms (AL1 and AL2).
- Povucite ALARM 1/2/DUAL switch to select either AL1 or AL2. The corresponding alarm indicator (AL1 or AL2) will illuminate on the display.
- Pritisnite i držite ALARM button. The alarm time display will begin to flash.
- Dok držite ALARM dugme, pritisnite HOUR button to adjust the alarm hour. Observe the PM indicator.
- Dok još držite ALARM dugme, pritisnite MINUTE dugme za podešavanje minuta alarma.
- Otpustite ALARM dugme za podešavanje vremena alarma.
- To activate the alarm, ensure the ALARM UKLJUČEN / ISKLJUČEN switch is in the ON position. The selected alarm indicator (AL1 or AL2) will remain lit.
- To set the second alarm, repeat steps 1-6, selecting the other alarm (AL2 or AL1).
Slika 4: Gotovoview of the control buttons on the top of the alarm clock for setting time and alarms.
3. Korištenje funkcije odgode alarma
Kada se oglasi alarm, pritisnite veliko dugme SNOOZE dugme koje se nalazi na vrhu sata. Alarm će se privremeno zaustaviti i ponovo oglasiti nakon otprilike 9 minuta.
4. Turning Off the Alarm
To turn off the alarm completely, slide the ALARM UKLJUČEN / ISKLJUČEN switch to the OFF position. The alarm indicator (AL1 or AL2) will turn off.
5. Ascending Alarm Volume
The alarm starts at a low volume and gradually increases, providing a gentle wake-up experience. If not turned off, the alarm will continue to increase in volume and frequency.
Figure 5: The alarm clock positioned on a nightstand, illustrating its compact size and the ascending alarm feature.
Održavanje
- Čistite sat mekom, suhom krpom. Ne koristite abrazivna sredstva za čišćenje ili rastvarače.
- Izbjegavajte izlaganje uređaja ekstremnim temperaturama, direktnoj sunčevoj svjetlosti ili visokoj vlažnosti.
- Replace backup batteries annually to ensure reliable performance.
Rješavanje problema
| Problem | Rješenje |
|---|---|
| Ekran je prazan. | Ensure the AC power cord is securely plugged into a working outlet. If using battery backup, the display will not light up; it only preserves settings. |
| Alarm se ne oglašava. | Proverite da li je ALARM UKLJUČEN / ISKLJUČEN switch is in the ON position. Verify the alarm time is set correctly and the PM indicator is accurate. |
| Postavke vremena/alarma se gube nakon nestanka strujetage. | Ensure fresh AA batteries are installed correctly in the battery backup compartment. |
| Clock feels hot. | Unplug the clock immediately and discontinue use. Contact customer support. |
| Alarm is too quiet/loud. | The alarm volume is ascending. Allow time for it to increase. There is no manual volume adjustment. |
| Netačan voltage warning (UK/Gulf regions). | This clock is designed for 110V-120V AC power. It is not compatible with 220V-240V systems without a proper voltage converter. Using an incorrect voltage may damage the unit and pose a safety risk. |
Specifikacije
- Brand: Sharp
- Model: SPC387
- Boja: Crno - Crvena LED dioda
- Vrsta prikaza: Digitalna LED
- Dimenzije proizvoda: 5.5 cm Š x 2.1 cm V
- Izvor napajanja: Electrical (AC) with Battery Backup (2x AA batteries, not included)
- Materijal: Plastika
- Težina artikla: 8.8 unce
- Posebna karakteristika: Dual Alarm, Ascending Alarm Volume, Snooze Function
Garancija i podrška
This product comes with a Limited Warranty from Sharp. For detailed warranty information or technical support, please refer to the documentation included in your product packaging or visit the official Sharp website.
For further assistance, you may also contact the seller, The Clock Shop - Sharp, through their Amazon store page.
Proizvođač: SHARP
