sinocare AES-U181

Sinocare uputstvo za upotrebu aparata za mjerenje krvnog pritiska

Model: AES-U181

Brand: Sinocare

Uvod

The Sinocare Blood Pressure Monitor (Model AES-U181) is designed for accurate and convenient measurement of blood pressure and pulse rate at home. Featuring a large LED screen, adjustable upper arm cuff, and voice broadcast function, it provides a user-friendly experience for monitoring your health.

Sadržaj paketa

Upon opening your Sinocare Blood Pressure Monitor package, you will find the following items:

  • 1 x Sinocare Upper Arm Blood Pressure Monitor
  • 1 x Adjustable Upper Arm Cuff (8.6-16.5 inches / 24-42cm)
  • 1 x Uputstvo za upotrebu
  • 4 x AAA baterije
Sinocare Blood Pressure Monitor and adjustable cuff.

The main unit of the Sinocare Blood Pressure Monitor along with its adjustable upper arm cuff.

Contents of the Sinocare Blood Pressure Monitor package.

A kompletan view of the package contents, including the blood pressure monitor, cuff, user manual, and four AAA batteries.

Setup

1. Instalacija baterije

The Sinocare Blood Pressure Monitor operates on 4 AAA batteries, which are included in the package.

  1. Locate the battery compartment on the bottom of the main unit.
  2. Otvorite poklopac baterije.
  3. Umetnite 4 AAA baterije, pazeći na ispravan polaritet (+/-) kao što je naznačeno unutar odjeljka.
  4. Čvrsto zatvorite poklopac baterije.
Installing AAA batteries into the Sinocare Blood Pressure Monitor.

Krupni plan view of the battery compartment on the underside of the monitor, showing the correct placement of the four AAA batteries.

This video demonstrates how to open the battery compartment and correctly insert the four AAA batteries into the Sinocare Blood Pressure Monitor.

2. Priključak manžetne

Connect the air tube from the cuff to the air jack on the side of the main unit. Ensure it is securely inserted.

Connecting the arm cuff to the Sinocare Blood Pressure Monitor.

The adjustable arm cuff's air tube is shown securely connected to the designated port on the side of the blood pressure monitor.

This video clip illustrates the process of connecting the air tube from the arm cuff to the main blood pressure monitor unit.

Uputstvo za upotrebu

1. Priprema za mjerenje

For accurate readings, follow these steps before taking a measurement:

  1. Sjednite u udoban položaj s oslonjenim leđima i ravnim stopalima na podu.
  2. Place your forearm on a table, palm facing up.
  3. Ensure the cuff is wrapped correctly around your upper arm, with enough space to slide two fingertips underneath. The air tube should be located on the forearm.
  4. Position the cuff so that the central area of the arm cuff is at the same height as your heart.
  5. Ostanite mirni i izbjegavajte razgovor tokom procesa mjerenja.
  6. Allow at least 1 minute between consecutive measurements to allow blood flow to normalize.
Step-by-step guide for accurate blood pressure measurement.

A visual guide detailing the correct posture, cuff placement, and preparation steps for obtaining accurate blood pressure readings.

This official video provides a comprehensive guide on the correct procedure for measuring blood pressure using the Sinocare monitor, emphasizing proper body and arm positioning.

2. Mjerenje

Once prepared, simply press the "START/STOP" button to begin the measurement. The monitor will automatically inflate the cuff and display your systolic pressure, diastolic pressure, and pulse rate.

Sinocare Blood Pressure Monitor displaying measurement results.

The large LED screen of the Sinocare Blood Pressure Monitor clearly shows systolic (SYS), diastolic (DIA), and pulse (PUL) readings after a measurement.

This video demonstrates the one-touch operation of the Sinocare Blood Pressure Monitor, from pressing the start button to the display of the final blood pressure and pulse readings.

3. Glasovna funkcija

The monitor features a voice broadcast function that announces your blood pressure and pulse readings. This function can be turned on or off according to your preference. Refer to the user manual for specific instructions on adjusting voice settings.

Sinocare Blood Pressure Monitor with voice announcement feature.

The monitor's display highlights the voice announcement feature, which provides audible readings for enhanced accessibility.

This segment of the video demonstrates the voice broadcast feature, where the monitor audibly announces the blood pressure and pulse results.

4. Funkcija memorije

The Sinocare Blood Pressure Monitor supports two user modes and can store up to 180 data sets (90 readings for each user). This allows for tracking individual progress over time.

Sinocare Blood Pressure Monitor dual user mode.

The monitor supports two distinct user profiles, allowing each user to store and track their individual blood pressure readings.

Important Notes for Accurate Readings

  • Blood pressure can vary throughout the day. For consistent monitoring, take measurements at the same time each day.
  • Ensure the cuff is tied correctly and not too tight, allowing two fingertips to slide underneath.
  • The measurement position significantly impacts results. Always measure under the same conditions (e.g., sitting, arm at heart level).
  • Izbjegavajte razgovor ili kretanje tokom mjerenja.
  • If you need to take multiple readings, wait at least one minute between measurements to allow blood flow to normalize.

Specifikacije proizvoda

FeatureSpecifikacija
Naziv modelaAES-U181
BrandSinocare
Display TypeDigital
Veličina manžete8.6-16.5 inča (24-42 cm)
Measurement Accuracy (Pressure)± 3 mmHg
Measurement Accuracy (Pulse)± 5%
Memory Storage180 sets (90 for each of 2 users)
Izvor napajanja4 x AAA baterije (uključene)
Automatsko isključivanjeNakon 1 minute neaktivnosti

Održavanje

  • čišćenje: Obrišite monitor i manžetnu mekom, suhom krpom. Nemojte koristiti abrazivna sredstva za čišćenje niti uranjati uređaj u vodu.
  • Skladištenje: Uređaj čuvajte na hladnom i suhom mjestu, dalje od direktne sunčeve svjetlosti i ekstremnih temperatura.
  • Zamjena baterije: Zamijenite baterije kada se na ekranu pojavi indikator slabe baterije kako biste osigurali tačna očitavanja.

Rješavanje problema

ProblemMogući uzrokRješenje
No display/Unit does not turn onBaterije su prazne ili nepravilno umetnute.Provjerite polaritet baterija ili ih zamijenite novim AAA baterijama.
Netačna očitavanjaIncorrect cuff placement, movement/talking during measurement, or insufficient rest before measurement.Re-read "Preparation for Measurement" and "Important Notes for Accurate Readings" sections. Ensure proper technique.
Manžetna se ne napuhavaAir tube not securely connected or cuff is damaged.Check cuff connection. If still not inflating, contact customer service.

Garancija i podrška

Sinocare is committed to providing high-quality products and excellent customer service. If you have any questions, concerns, or require assistance with your Blood Pressure Monitor, please do not hesitate to contact our customer service team. We aim to reply within 24 hours and offer proper solutions.

Please refer to your product packaging or the official Sinocare webstranicu za detalje o garanciji i kontakt informacije.