iBeam Micro Camera Black Fixed Angle User Manual

1. Uvod

This manual provides detailed instructions for the installation, operation, and maintenance of your iBeam Micro Camera Black Fixed Angle (Model TE-MICM). This camera is designed to enhance vehicle safety by providing clear visual assistance. Please read this manual thoroughly before installation and use to ensure proper function and safety.

2. Sigurnosne informacije

• Uvijek isključite akumulator vozila prije početka bilo kakve električne instalacije.
• Ensure all wiring is properly insulated and secured to prevent short circuits or damage.
• Do not obstruct the driver's view or interfere with vehicle controls during installation.
• Konsultujte se sa profesionalnim instalaterom ako niste sigurni u vezi bilo kojeg dijela procesa instalacije.
• This product is intended as an aid and should not replace safe driving practices.

3. Sadržaj paketa

Provjerite da li su sve stavke prisutne u paketu:

• iBeam Micro Camera Black Fixed Angle (TE-MICM)
• Mounting Hardware (8MM threaded bolt, nuts, washers)
• kabelskog svežnja
• Uputstvo za upotrebu (ovaj dokument)

Image: The retail packaging for the iBeam Micro Camera, showing the camera and its model number on the box.

4. Proizvod je gotovview

The iBeam Micro Camera (TE-MICM) is a compact, fixed-angle camera designed for various vehicle applications, including backup assistance. It features a durable, water-resistant design and provides a clear image for enhanced visibility.

Slika: Krupni plan view of the iBeam Micro Camera, highlighting its compact black housing and the camera lens.

Ključne karakteristike:

• Kompaktan dizajn: Small footprint for discreet installation.
• Otporan na vodu: IP68 rated for reliable performance in various weather conditions.
• Senzor slike: 1/4 CMOS image sensor for clear video output.
• Switchable Image: Mirror/Normal image option for versatile mounting (e.g., rear view ili ispred view).
• Montaža: Features an 8MM threaded bolt for secure mounting.

5. Postavljanje i instalacija

Follow these steps for proper installation of your iBeam Micro Camera:

1. Odaberite lokaciju za montažu: Select a location that provides an unobstructed view and allows for secure mounting. Common locations include above the license plate, on the bumper, or integrated into a vehicle panel. Consider the 18.7mm height of the camera housing for clearance.
2. Pripremite montažnu površinu: If drilling is required, ensure no existing wiring or components will be damaged. Drill a hole appropriate for the 8MM threaded bolt.
3. Montirajte kameru: Insert the 8MM threaded bolt through the prepared hole and secure the camera using the provided nuts and washers. Ensure the camera is oriented correctly for the desired view.
4. Ožičenje:
   • Connect the camera's power wire (typically red) to a 12V power source that is activated when the camera is needed (e.g., reverse light circuit for a backup camera, or ignition-switched power for a front camera).
   • Connect the camera's ground wire (typically black) to a clean chassis ground point.
   • Connect the video output cable from the camera to the video input of your display monitor or head unit.
5. Test funkcionalnost: Before reassembling vehicle panels, test the camera's operation. Turn on the vehicle and engage the appropriate gear (e.g., reverse) to activate the camera. Verify that the image appears clearly on your display.
6. Sigurno ožičenje: Route all cables safely away from moving parts, heat sources, and sharp edges. Use zip ties or electrical tape to secure wiring.

Image: Illustration showing two common mounting options for the iBeam Micro Camera: a flush mount and a lip mount using the threaded bolt.

6. Uputstvo za upotrebu

Once installed, the iBeam Micro Camera operates automatically when power is supplied to it and the connected display is active.

• Backup Camera Use: If connected to the reverse light circuit, the camera image will automatically appear on your display when the vehicle is shifted into reverse.
• Front/Side Camera Use: If connected to an ignition-switched power source or a manual switch, the camera can be activated as needed.
• Orijentacija slike: The camera supports switchable mirror/normal image output. Refer to your installer or the camera's wiring diagram for instructions on how to change this setting, typically by cutting a specific wire loop.

7. Održavanje

The iBeam Micro Camera is designed for low maintenance. Follow these guidelines to ensure longevity:

• čišćenje: Povremeno čistite objektiv kamere mekom,amp krpom kako biste uklonili prljavštinu, prašinu ili mrlje od vode koje mogu začepiti viewNe koristite abrazivna sredstva za čišćenje.
• inspekcija: Regularly check the camera's mounting and wiring connections to ensure they remain secure and free from damage.
• Izbjegavajte pranje pod visokim pritiskom: While water-resistant, avoid directing high-pressure water sprays directly at the camera lens or housing, as this could potentially compromise the seal.

8. Otkrivanje problema

If you experience issues with your iBeam Micro Camera, refer to the following common problems and solutions:

9. Specifikacije

10. Garancija i podrška

For warranty information and technical support, please contact iBeam customer service or visit the official iBeam webSačuvajte račun kao dokaz o kupovini u slučaju bilo kakvih reklamacija.

Proizvođač: Metra Electronics Corp