AINOPE AV829

AINOPE Car Charger Instruction Manual

Model: AV829

1. Proizvod je gotovview

The AINOPE Super Fast Car Charger is an all-metal, compact USB charger designed for rapid charging of mobile devices in your vehicle. Featuring advanced Quick Charge technology, it provides efficient power delivery for a wide range of smartphones and tablets, including iPhone and Samsung devices. Its robust construction ensures durability and reliable performance on the go.

This manual provides essential information on the proper installation, operation, maintenance, and troubleshooting of your AINOPE car charger to ensure optimal performance and longevity.

2. Sigurnosne informacije

Please read all safety instructions carefully before using the product. Failure to follow these instructions may result in electric shock, fire, or damage to the product or connected devices.

  • Ne izlažite punjač vodi, vlazi ili ekstremnim temperaturama.
  • Do not attempt to disassemble, repair, or modify the charger. This will void the warranty and may cause harm.
  • Čuvati van domašaja djece.
  • Ensure the car's cigarette lighter socket is clean and free of debris before inserting the charger.
  • Avoid using the charger in environments with excessive dust or dirt.
  • Disconnect the charger from the power source when not in use or during vehicle maintenance.
  • Use only compatible charging cables with your devices.

3. Sadržaj paketa

Provjerite da li su sve stavke prisutne u paketu:

  • 1 x AINOPE Car Charger Adapter
  • Snap-On Shrapnel Connections (pre-installed or included for replacement)
  • Metal Shrapnel (pre-installed or included for replacement)

4. Značajke proizvoda

The AINOPE Car Charger is engineered with several key features to provide a superior charging experience:

  • Dual Quick Charge 3.0 portovi: Equipped with two QC 3.0 ports, allowing for simultaneous fast charging of two devices.
  • Ukupna izlazna snaga 45W: Delivers up to 45W of power for rapid charging.
  • Potpuno metalna konstrukcija: Durable zinc alloy shell for enhanced heat dissipation and longevity.
  • Kompaktan i elegantan dizajn: Small form factor ensures it blends seamlessly with your car's interior without obstructing other controls.
  • Univerzalna kompatibilnost: Supports a wide range of devices including iPhone, Samsung, Google Pixel, iPad, and more.
  • Napredne sigurnosne karakteristike: Built-in safeguards protect against overcurrent, overcharging, overheating, and short-circuiting.
Close-up of AINOPE car charger with dual USB ports

Image: Dual Quick Charge 3.0 Ports. This image shows a close-up of the red AINOPE car charger, highlighting its two USB ports, each marked with the Quick Charge 3.0 logo, indicating high-speed charging capabilities.

AINOPE car charger in a car's cigarette lighter socket

Image: Ultra Compact Design. This image illustrates the compact size of the AINOPE car charger when plugged into a vehicle's cigarette lighter socket, showing how it sits flush and does not protrude excessively.

Diagram showing various devices compatible with the charger

Image: Wide Compatibility. This image displays a range of mobile devices, including various smartphones and tablets, indicating the broad compatibility of the AINOPE car charger with different brands and models.

Close-up of the car charger's metal body

Image: Zinc Alloy Shell. Detaljno view of the car charger's metallic body, emphasizing its robust zinc alloy construction and textured finish, which contributes to its durability and heat dissipation.

5. Postavljanje i instalacija

Installing your AINOPE car charger is a simple process:

  1. Ensure your vehicle's engine is running or the ignition is in the "ACC" (Accessory) position to provide power to the cigarette lighter socket.
  2. Locate the 12V/24V cigarette lighter socket in your vehicle.
  3. Insert the AINOPE car charger firmly into the socket until it is securely seated. The charger's LED indicator (if present) may illuminate to confirm power connection.
  4. Punjač je sada spreman za upotrebu.

6. Uputstvo za upotrebu

Za punjenje vaših uređaja:

  1. Connect your device's USB charging cable to one of the USB ports on the AINOPE car charger.
  2. Connect the other end of the cable to your mobile device (smartphone, tablet, etc.).
  3. Charging will begin automatically. The charger's intelligent chip will detect your device and deliver the optimal charging current.
  4. You can charge two devices simultaneously using both USB ports.

For optimal fast charging, ensure your device and charging cable support Quick Charge 3.0 or a compatible fast charging protocol.

7. Održavanje

Proper care will extend the life of your car charger:

  • čišćenje: Use a soft, dry cloth to wipe the surface of the charger. Do not use liquid cleaners or abrasive materials.
  • Skladištenje: Kada se punjač ne koristi duži period, čuvajte ga na hladnom i suhom mjestu, dalje od direktne sunčeve svjetlosti i ekstremnih temperatura.
  • inspekcija: Periodically check the charger and its connections for any signs of damage or wear. If any damage is observed, discontinue use.

8. Otkrivanje problema

If you encounter issues with your AINOPE car charger, refer to the following common problems and solutions:

ProblemMogući uzrokRješenje
Charger not powering on/no charging.
  • Slaba veza.
  • Vehicle's cigarette lighter socket is not receiving power (e.g., car off, blown fuse).
  • Oštećen punjač ili kabel.
  • Ensure the charger is firmly inserted into the socket.
  • Check if the vehicle's ignition is on. Test the socket with another device. Consult your vehicle's manual for fuse box location.
  • Try a different USB cable. If the issue persists, the charger may be faulty.
Slow charging or not fast charging.
  • Uređaj ili kabel ne podržavaju brzo punjenje.
  • High power consumption by the device during charging.
  • Verify that your device and USB cable are compatible with Quick Charge 3.0 or other fast charging protocols.
  • Close background applications on your device to reduce power draw.
Charger gets hot during use.
  • Normalan rad tokom punjenja velikom snagom.
  • Loša ventilacija ili previsoka temperatura okoline.
  • A slight increase in temperature is normal. If it becomes excessively hot to touch, disconnect immediately.
  • Ensure the charger is not covered and has adequate airflow. Avoid direct sunlight.

If the problem persists after trying these solutions, please contact AINOPE customer support.

9. Specifikacije proizvoda

FeatureDetalj
Broj modelaAV829
Ulazni voltage12V-24V DC
Ukupni USB portovi2 (Dual QC 3.0)
Maksimalna izlazna snaga45W (ukupno)
AmpDob6 Amps (Ukupno)
Tehnologija povezivanjaUSB
Posebne karakteristikeFast Charging, All-Metal Design
Form FactorCompact
BojaCrveni
Težina artikla1.76 unci (otprilike 50 g)
Dimenzije paketa4.06 x 2.99 x 1.26 inča

10. Garancija i korisnička podrška

AINOPE products are designed for reliability and performance. For information regarding warranty coverage, product registration, or technical assistance, please visit the official AINOPE webweb-mjesto ili direktno kontaktirajte njihov tim za korisničku podršku.

Proizvođač: AINOPE

Webstranica: AINOPE Official Store on Amazon

Please have your product model number (AV829) and purchase details ready when contacting support.

Povezani dokumenti - AV829

Preview AINOPE AV839 Bluetooth FM Transmitter Car Adapter User Guide
User guide for the AINOPE AV839 Bluetooth FM Transmitter Car Adapter, detailing specifications, operation, and safety precautions for optimal use.
Preview AINOPE AV849 PD+QC FM Car Charger User Manual
This manual provides instructions for the AINOPE AV849 PD+QC FM Car Charger, covering its features, operation, specifications, and troubleshooting. Learn how to connect via Bluetooth or U disk, charge devices, use hands-free calling, and customize LED lighting.
Preview LISEN 2E747 Metal Magnetic Wireless Car Charger Safety Test Report UL 62368-1
Safety test report for the LISEN 2E747 Metal Magnetic Wireless Car Charger, compliant with UL 62368-1 safety requirements. Details testing by Shenzhen SiCT Technology Co., Ltd. for Shenzhen Xiangdangwen Technology Co., Ltd.