XtremepowerSAD 75125

XtremepowerUS 1.5HP High Flow Pool Pump Instruction Manual

Model: 75125

1. Uvod

This manual provides detailed instructions for the safe and efficient installation, operation, and maintenance of your XtremepowerUS 1.5HP High Flow Pool Pump. This self-priming pump is designed for above-ground swimming pools and spas, featuring a 1.5-inch strainer basket filter and a powerful 1.5HP motor for optimal water circulation and filtration.

2. Sigurnosne informacije

UPOZORENJE: Read and follow all instructions carefully before installing or operating this product. Failure to do so could result in serious injury or death.

3. Components Overview

The XtremepowerUS 1.5HP High Flow Pool Pump system typically includes the following main components:

XtremepowerUS 1.5HP High Flow Pool Pump

Image: The XtremepowerUS 1.5HP High Flow Pool Pump unit, showing the motor and the strainer basket with its clear lid.

4. Postavljanje i instalacija

Follow these steps for proper installation of your pool pump system. Refer to the video below for a visual guide.

Video: Installation guide for the XtremepowerUS 1.5HP Above Ground Pool Pump. This video demonstrates the steps for assembling the pump and connecting it to a pool filter and an above-ground pool.

4.1. Montiranje pumpe

  1. Place Pump on Base: Position the pump unit onto the mounting base. Ensure the pump's screw holes align with the corresponding holes on the base, typically marked with a triangle symbol.
  2. Insert Nuts: Flip the mounting base over. Insert all four nuts into the designated mounting spaces on the underside of the base.
  3. Sigurna pumpa: Flip the mounting base back. Place the bolts into the screw holes and tighten all four bolts using a socket wrench until secure.
Pump mounted on base

Image: The pool pump securely mounted on its base, ready for hose connections.

4.2. Spajanje crijeva

  1. Install Hose Adapters: If not already installed, screw the hose adapters onto the pump's inlet and outlet ports. Note: Hose adapters may not be included and might need to be purchased separately.
  2. Place Filter on Base: If using a sand filter, place it onto the mounting base next to the pump.
  3. Pripremite crijeva: Secure the hoses and insert an O-ring into the hose fitting groove on both ends of each hose to ensure a watertight seal.
  4. Connect Pump to Filter: Connect one hose from the pump's discharge port to the filter's inlet port. Twist the connection tight.
  5. Connect Pool Outlet to Pump: Connect a hose from the pool's outlet (skimmer or main drain) to the pump's intake hose adapter. Ensure the O-ring is properly seated and tighten the hose clamp.
  6. Connect Filter to Pool Return: Connect a hose from the filter's return line port (marked as "POOL" on the multi-port valve) to the pool's return inlet. Tighten the hose clamp.
Pool pump and filter connected to an above-ground pool

Image: The XtremepowerUS pool pump and filter system fully connected to an above-ground pool, showing the hose routing.

Close-up of pump hose connection

Slika: Krupni plan view of the hose connection to the pool pump, highlighting the secure fitting.

5. Operacija

5.1. Punjenje pumpe

Before starting the pump for the first time or after cleaning the strainer basket, it is crucial to prime the pump to ensure it is filled with water. Running the pump dry can cause severe damage.

  1. Ensure all valves are open, allowing water to flow from the pool to the pump.
  2. Remove the strainer lid and fill the strainer housing with water until it overflows.
  3. Replace the strainer lid and ensure it is securely tightened.
  4. Turn on the pump. The pump should begin to draw water and expel air. If water does not flow within a few minutes, turn off the pump and repeat the priming process.

5.2. Pokretanje pumpe

Once primed, plug the pump into a grounded electrical outlet. The pump will begin circulating water. Monitor the pressure gauge on your filter (if applicable) to ensure it operates within the recommended range.

High speed and powerful flow of the pump

Image: Visual representation of the pump's high flow rate (90 GPM / 5,400 GPH) and 3450 RPM motor, indicating powerful water circulation.

6. Održavanje

Redovno održavanje osigurava dugotrajnost i efikasan rad vaše bazenske pumpe.

6.1. Cleaning the Strainer Basket

The pump features an extra-large debris basket with a clear cover, allowing you to easily see when it needs cleaning. A clogged basket reduces pump efficiency and can lead to damage.

  1. Isključite napajanje: Always turn off the pump and disconnect it from the power source before cleaning.
  2. Zatvorite ventile: Close any isolation valves between the pool and the pump to prevent water flow.
  3. Uklonite poklopac: Unscrew and remove the clear strainer lid.
  4. Ukloni korpu: Pažljivo izvadite korpu cjediljke.
  5. Očisti korpu: Ispraznite sav otpad iz korpe i temeljito je isperite vrtnim crijevom.
  6. Pregledajte O-prsten: Check the lid's O-ring for cracks or wear. Replace if necessary.
  7. ponovo sastaviti: Place the clean basket back into the housing, ensure the O-ring is properly seated, and securely tighten the lid.
  8. Primarna pumpa: Follow the priming steps in Section 5.1 before restarting the pump.
Close-up of the pump's large debris basket

Image: A close-up of the pump's large debris basket with a clear lid, designed for easy monitoring and reduced cleaning frequency.

6.2. Priprema za zimu

In colder climates, proper winterization is essential to prevent freeze damage. Consult your pool professional for specific winterization procedures for your pool type.

7. Otkrivanje problema

This section addresses common issues you might encounter with your pool pump.

ProblemMogući uzrokRješenje
Pumpa se ne pokrećeNo power, tripped breaker, faulty motor.Check power connection, reset breaker, contact support if motor is faulty.
Nizak protok vodeClogged strainer basket, air leak in suction line, low water level in pool, clogged filter.Clean strainer basket, check hose connections for leaks, ensure adequate pool water level, backwash/clean filter.
Pumpa je bučnaAir in system, cavitation, worn bearings.Prime pump, check for suction leaks, contact support for worn bearings.
Voda curi iz pumpeLoose connections, damaged O-rings/seals, cracked housing.Tighten connections, replace O-rings/seals, contact support for cracked housing.

8. Specifikacije

Technical specifications for the XtremepowerUS 1.5HP High Flow Pool Pump, Model 75125:

FeatureDetalj
BrandXtremepowerUS
Broj modela75125
Horsepower1.5 HP
Voltage115V/60Hz
AmpDob15 Amps
Brzina3450 o/min
Maksimalni protok90 GPM / 5,400 GPH
Inlet Internal Fitting1.5" NPT
Maksimalna temperatura122°F (50°C)
Vodootporni nivoIPX5
Dimenzije proizvoda22.5 cm D x 7.5 cm Š x 10 cm V
Težina artikla25 funti
Izvor napajanjaCorded Electric
Specifične upotrebeNadzemni bazen
Universal pool pump design with dimensions

Image: Diagram illustrating the universal design and key dimensions of the XtremepowerUS pool pump, compatible with 1.5" NPT inlet/outlet fittings.

9. Jamstvo i podrška

For warranty information, technical support, or to purchase replacement parts, please contact XtremepowerUS customer service. Refer to your product packaging or the official XtremepowerUS webstranicu za najnovije kontakt podatke i uslove garancije.

Webstranica: XtremepowerUS Official Store

Povezani dokumenti - 75125

Preview XtremepowerUS Vodič za instalaciju i upotrebu pješčanog filtera za bazen | Modeli 75139-75142
XtremepowerUS Uputstvo za instalaciju i upotrebu pješčanog filtera za bazene: Sveobuhvatna uputstva za modele 75139, 75140, 75141 i 75142. Obuhvata sigurnost, specifikacije, instalaciju, rad, rješavanje problema i dijelove za nadzemne i ukopane bazene.
Preview XtremepowerUS 1.5 HP 230V 2-Speed Inground Pool Pump Installation and User's Guide
Comprehensive installation and user's guide for the XtremepowerUS 1.5 HP 230V 2-Speed Inground Pool Pump (SKU: 75406). Covers safety instructions, installation, operation, maintenance, troubleshooting, and specifications.
Preview XtremepowerUS 1.5HP Pool Pump and Sand Filter System Installation and User's Guide
Comprehensive installation, operation, and maintenance guide for the XtremepowerUS 1.5HP 115V 1-Speed 19 Inch 7-Way Above-Ground Pool Pump and Sand Filter System (Item: 75112). Includes safety instructions, troubleshooting, and parts information.
Preview XtremepowerUS DE Pool Filter Installation and User's Guide
Comprehensive guide for installing, operating, and maintaining XtremepowerUS DE Pool Filters (SKU 75205, 75206). Includes safety warnings, setup instructions, maintenance procedures, troubleshooting tips, and replacement parts information.
Preview XtremepowerUS 75030 0.25HP Above Ground Pool Pump and Sand Filter System Installation and User Guide
Comprehensive installation and user guide for the XtremepowerUS 75030 0.25HP 115V 1-speed 12-inch 7-way above ground pool pump and sand filter system. Includes safety instructions, setup, operation, maintenance, and troubleshooting.
Preview XtremepowerUS 75220 Above Ground Pool Adjustable Deck Ladder Assembly and User Guide
Comprehensive assembly and user guide for the XtremepowerUS 75220 Adjustable Deck Ladder. Includes safety instructions, parts list, dimensions, and installation steps for above-ground pools.