Uvod
This manual provides essential information for the safe and effective operation, setup, and maintenance of your Einhell TC-ID 720/1 E Impact Drill. Please read these instructions carefully before using the tool and keep them for future reference.
The Einhell TC-ID 720/1 E is a powerful impact drill designed for various drilling tasks in different materials. It features two functions (drilling and impact drilling), electronic speed control, forward and reverse rotation, and an ergonomic design for comfortable use.
Slika 1: Einhell TC-ID 720/1 E Impact Drill. This image shows the complete drill assembly with the auxiliary handle and depth stop attached.
Sigurnosna uputstva
Always observe general safety regulations when using power tools. Failure to follow these instructions may result in electric shock, fire, and/or serious injury.
- Nosite odgovarajuću ličnu zaštitnu opremu, uključujući zaštitne naočare, zaštitu za sluh i rukavice.
- Uvjerite se da je radni komad sigurno prikljamped ili zadržan.
- Održavajte radni prostor čistim i dobro osvijetljenim.
- Nemojte koristiti električne alate u eksplozivnoj atmosferi, kao što je prisustvo zapaljivih tečnosti, gasova ili prašine.
- Držite djecu i osobe u blizini dok koristite električni alat.
- Isključite utikač iz izvora napajanja prije bilo kakvog podešavanja, promjene pribora ili odlaganja električnih alata.
- Nemojte silom pritiskati električni alat. Koristite odgovarajući električni alat za svoju primjenu.
- Održavajte električne alate. Provjerite ima li pomicanja ili vezivanja pokretnih dijelova, loma dijelova i svih drugih stanja koja mogu utjecati na rad električnog alata.
Components Overview
Familiarize yourself with the main components of your impact drill:
- Stezna glava bez ključa: For quick and easy bit changes (1.5 - 13 mm).
- pomoćna ručka: Pruža dodatni hvat i kontrolu.
- Zaustavljanje dubine: For precise drilling depth adjustment.
- Brojčanik za kontrolu brzine: Adjusts drilling speed for different materials.
- Prekidač za odabir funkcija: Toggles between drilling and impact drilling modes.
- Prekidač naprijed/nazad: Changes rotation direction for drilling and screwdriving.
- Dugme za zaključavanje: Za kontinuirani rad.
- Softgrip Surfaces: Za udobno i sigurno rukovanje.
Slika 2: Keyless Chuck. This image highlights the 13mm keyless chuck, allowing for quick and tool-free bit changes.
Slika 3: Depth Stop. This image shows the adjustable metal depth stop, used to control drilling depth precisely.
Setup
- Pričvršćivanje pomoćne ručke: Loosen the auxiliary handle by twisting it counter-clockwise. Slide it over the chuck and position it to your preferred angle for optimal control. Tighten it securely by twisting clockwise.
- Installing the Depth Stop: Insert the depth stop rod into the hole on the auxiliary handle. Adjust its position to the desired drilling depth and secure it by tightening the screw on the auxiliary handle.
- Umetanje svrdla:
- Provjerite da li je bušilica isključena iz izvora napajanja.
- Twist the front part of the keyless chuck counter-clockwise to open the jaws.
- Ubacite svrdlo do kraja u steznu glavu.
- Twist the front part of the chuck clockwise to securely tighten the jaws around the drill bit. Ensure the bit is centered and firmly held.
Uputstvo za upotrebu
1. Odabir načina rada
- Način bušenja: For wood, metal, plastic, and soft materials. Set the function selector switch to the drill symbol.
- Način udarnog bušenja: For concrete, masonry, and hard materials. Set the function selector switch to the hammer symbol.
Slika 4: Two Functions Icon. This icon indicates the drill's capability for both standard drilling and impact drilling.
2. Podešavanje brzine
The electronic speed control allows you to adjust the drilling speed according to the material and application. Use the speed control dial to pre-select the maximum speed, and the trigger switch to vary the speed during operation.
Slika 5: Speed Control Dial. This image shows the dial for adjusting the maximum rotational speed of the drill.
Slika 6: Speed Electronics Icon. This symbol represents the electronic speed control feature of the drill.
3. Rotacija naprijed/nazad
Use the forward/reverse switch to select the direction of rotation. Forward rotation is for drilling and tightening screws, while reverse rotation is for loosening screws or extracting jammed drill bits.
4. Drilling Procedure
- Ensure the correct drill bit is installed and the auxiliary handle and depth stop are adjusted.
- Select the appropriate operating mode (drilling or impact drilling).
- Plug the drill into a suitable power outlet.
- Hold the drill firmly with both hands, ensuring a stable stance.
- Position the drill bit on the desired drilling point.
- Gently press the trigger switch to start drilling. Apply steady, even pressure.
- Za kontinuirani rad, pritisnite dugme za zaključavanje dok je okidač pritisnut. Za otpuštanje, ponovo pritisnite okidač.
- Once drilling is complete, release the trigger switch and wait for the drill bit to stop rotating before withdrawing it from the workpiece.
Slika 7: Operating the Drill. This image shows a user demonstrating proper two-handed grip and technique while drilling into a wall.
Održavanje
Redovno održavanje osigurava dugotrajnost i optimalne performanse vaše udarne bušilice.
- čišćenje: Nakon svake upotrebe, očistite kućište alata mekom,amp cloth. Do not use harsh cleaning agents or solvents. Keep ventilation openings clear of dust and debris.
- Održavanje stezne glave: Povremeno čistite čeljusti stezne glave kako biste osigurali pravilno hvatanje svrdla.
- Karbonske četke: If the motor sparks excessively, the carbon brushes may need inspection or replacement. This should be performed by qualified personnel.
- Skladištenje: Bušilicu čuvajte na suhom, sigurnom mjestu, van dohvata djece.
- Inspekcija kabla: Regularly inspect the power cord for any damage. If damaged, have it repaired by a qualified electrician.
Rješavanje problema
Evo nekih uobičajenih problema i njihovih potencijalnih rješenja:
| Problem | Mogući uzrok | Rješenje |
|---|---|---|
| Bušilica se ne pokreće. | No power supply; faulty power cord; defective switch. | Check power connection; inspect power cord; contact service center. |
| Burgija klizi u steznoj glavi. | Chuck not tightened sufficiently; chuck jaws worn. | Tighten chuck firmly; replace chuck if worn. |
| Prekomjerne vibracije ili buka. | Bent drill bit; loose components; internal defect. | Replace bent bit; check for loose parts; contact service center. |
| Bušilica se pregrijava. | Preopterećenje; blokirani ventilacijski otvori. | Reduce load; clear ventilation slots; allow tool to cool. |
If you encounter problems not listed here or if the suggested solutions do not resolve the issue, please contact Einhell customer service or an authorized service center.
Specifikacije
| Feature | Vrijednost |
|---|---|
| Brand | Einhell |
| Broj modela | 4259848 |
| Power Input | 720 Watts |
| Voltage | 230 Volts |
| AmpDob | 4.3 A |
| Brzina bez opterećenja | 2800 o/min |
| Chuck Size (max) | 13 mm |
| Kapacitet bušenja (drvo) | 30 mm |
| Kapacitet bušenja (metal) | 10 mm |
| Kapacitet bušenja (beton) | 13 mm |
| Dimenzije proizvoda (D x Š x V) | 28.7 x 8.8 x 20.8 cm |
| Težina | 2.07 kg |
| Izvor napajanja | Corded Electric |
| Posebne karakteristike | 2 functions: drilling/impact drilling, electronic speed control, forward/reverse rotation |
Slika 8: Maximum Chuck Size. This icon indicates the drill's maximum chuck capacity of 13mm.
Slika 9: Wood Drilling Capacity. This icon illustrates a maximum drilling diameter of 30mm in wood.
Slika 10: Metal Drilling Capacity. This icon illustrates a maximum drilling diameter of 10mm in metal.
Slika 11: Concrete Drilling Capacity. This icon illustrates a maximum drilling diameter of 13mm in concrete.
Garancija i podrška
For warranty information, please refer to the documentation provided with your purchase or contact the retailer where the product was acquired. Einhell products typically come with a manufacturer's warranty against defects in materials and workmanship.
For technical support, spare parts, or service inquiries, please visit the official Einhell website or contact their customer service department. Keep your purchase receipt and model number (TC-ID 720/1 E, 4259848) handy when contacting support.
