1. Uvod
This manual provides essential information for the safe and efficient installation, operation, and maintenance of your Everbilt 1/3 HP Submersible Aluminum Sump Pump, Model HDPS33W. Please read all instructions carefully before use to ensure proper function and to prevent injury or damage.
2. Sigurnosne informacije
WARNING: Risk of Electric Shock. This pump is supplied with a grounding conductor and grounding-type attachment plug. To reduce the risk of electric shock, be certain that it is connected only to a properly grounded, grounding-type receptacle.
- Always disconnect power to the pump before handling, servicing, or performing any maintenance.
- Ne koristite pumpu ako je kabel za napajanje ili utikač oštećen.
- Ensure the electrical circuit is protected by a Ground Fault Circuit Interrupter (GFCI).
- Do not use the pump in applications involving flammable or explosive liquids.
- Wear appropriate personal protective equipment, such as safety glasses, during installation and maintenance.
- This pump is designed for clear water only. Do not use for sewage or other hazardous liquids.
3. Proizvod je gotovview
The Everbilt 1/3 HP Submersible Sump Pump is designed for efficient water removal from residential sump basins. It features a durable aluminum motor housing for effective heat dissipation and a tethered float switch for automatic operation. The pump is capable of handling 3/8 inch solids.
4. Postavljanje i instalacija
4.1 Kontrolna lista pred instalaciju
Before beginning installation, ensure you have the following items (some sold separately):
- Zaštitne naočare
- Screwdrivers (Phillips & Flat Head)
- Ručna nožna pila ili PVC rezač
- Ključ
- PVC Primer
- PVC Cement
- Navojna traka
- 1-1/4 in. or 1-1/2 in. Discharge Pipe
- 1-1/4 in. or 1-1/2 in. Check Valve
- 1-1/4 in. or 1-1/2 in. 90° Elbow
4.2 Sump Basin Zahtjevi
The pump requires a minimum 18-inch diameter sump basin for proper operation of the tethered float switch.
4.3 Priključak ispusne cijevi
- Connect a 1-1/2 inch FNPT discharge pipe to the pump's outlet. Use thread tape on the pipe threads to ensure a watertight seal.
- Install a check valve in the discharge line to prevent water from flowing back into the sump basin kada se pumpa isključi.
- Route the discharge pipe away from the foundation to prevent water recirculation.
4.4 Električni priključak
- Ensure the power supply is 115 Volts, AC.
- Plug the pump's 8.25 ft. power cord into a properly grounded 3-prong GFCI outlet. Do not use extension cords.
- Ensure the power cord is routed to prevent damage and does not interfere with the float switch operation.
4.5 Podešavanje plivajućeg prekidača
The tethered float switch must be able to move freely without obstruction. Adjust the tether length to set the desired ON and OFF levels for the pump. Ensure the float does not touch the sides of the sump basin or any pipes.
5. Operacija
The Everbilt sump pump operates automatically via its tethered float switch. When water in the sump basin rises and lifts the float to the 'ON' position, the pump will activate and begin discharging water. Once the water level drops and the float returns to the 'OFF' position, the pump will shut off. This pump features a continuous duty, efficient 115-Volt PSC motor.
5.1 Prvo puštanje u rad
After installation, fill the sump basin with water to verify the float switch activates the pump and that water is discharged correctly. Check for any leaks in the discharge piping.
6. Održavanje
Regular maintenance ensures optimal performance and extends the life of your sump pump.
- Mjesečni pregled: Povremeno provjeravajte karter basin for debris that could obstruct the pump or float switch. Remove any dirt, gravel, or other foreign objects.
- Provjera plovnog prekidača: Manually lift the float switch to ensure it moves freely and activates the pump.
- Čišćenje impelera: If the pump's performance decreases, disconnect power and inspect the semi-open thermoplastic impeller for clogs. Clear any debris carefully.
- Ispusna linija: Ensure the discharge line is free of obstructions and that the check valve is functioning correctly.
- Kabl za napajanje: Pregledajte kabel za napajanje da li ima znakova oštećenja ili istrošenosti. Zamijenite ako je potrebno.
7. Otkrivanje problema
| Problem | Mogući uzrok | Rješenje |
|---|---|---|
| Pumpa se ne pokreće | Nema struje za pumpu Float switch obstructed Aktivirano termičko preopterećenje | Check power supply and GFCI Clear obstruction around float Allow pump to cool down, then reset |
| Pumpa radi neprekidno | Float switch stuck in 'ON' position Nepovratni ventil neispravan ili nedostaje | Clear obstruction around float Ugradite ili zamijenite nepovratni ventil |
| Smanjeni protok vode | Discharge pipe obstructed Radno kolo je začepljeno Low voltage | Clear discharge pipe Clean impeller (disconnect power first) Provjerite ispravan obimtagopskrba |
| Ciklusi pumpi prečesto | Float switch set too low Water returning from discharge line | Adjust float switch tether Install or check check valve |
8. Specifikacije
| Feature | Specifikacija |
|---|---|
| Broj modela | HDPS33W |
| Horsepower | 1/3 KS (0.33 KS) |
| Voltage | 115 Volts |
| AmpDob | 5.5 A |
| Maximum Flow Rate (0 ft.) | 2600 galona na sat (GPH) |
| Maximum Flow Rate (10 ft.) | 2200 galona na sat (GPH) |
| Maximum Flow Rate (15 ft.) | 1950 galona na sat (GPH) |
| Maksimalna visina podizanja | 19 stopa |
| Discharge Outlet Diameter | 1-1/2 in. FNPT |
| Rukovanje čvrstim materijama | Do 3/8 in. |
| Tip prekidača pumpe | Tethered Float |
| Materijal kućišta | Aluminijum |
| Materijal radnog kola | Thermoplastic |
| Dužina kabla | 8.25 ft. |
| Dimenzije proizvoda (V x Š x D) | 10.63 in. x 8.27 in. x 10.63 in. |
| Težina proizvoda | 8.49 lb (approx. 9.18 lbs packaged) |
| Minimum Sump Basin Prečnik | 18 in. |
| Certifikati | CSA Certified |
9. Garancija
This Everbilt 1/3 HP Submersible Aluminum Sump Pump comes with a 1 godine ograničene garancije from the date of purchase. This warranty covers defects in materials and workmanship under normal use. For specific terms and conditions, please refer to the warranty documentation included with your product or contact Everbilt customer support.
10. Korisnička podrška
If you have any questions regarding the installation, operation, maintenance, or troubleshooting of your Everbilt sump pump, please contact Everbilt customer support for assistance. Keep your purchase receipt and model number (HDPS33W) readily available when contacting support.
