1. Uvod
This manual provides comprehensive instructions for the installation and use of the Fanvil WB101 Wallmount Bracket. This bracket is designed to securely mount compatible Fanvil X-series IP phones to a wall, optimizing desk space and improving accessibility. Please read this manual thoroughly before installation to ensure proper setup and safe operation.
2. Sigurnosne informacije
- Ensure the mounting surface is strong enough to support the weight of the bracket and the phone.
- Koristite odgovarajući alat i opremu za instalaciju. U slučaju nesigurnosti, konsultujte se sa kvalifikovanim stručnjakom.
- Držite male dijelove van domašaja djece kako biste spriječili opasnost od gušenja.
- Do not overtighten screws, as this may damage the bracket or the wall.
- Verify the phone is securely attached to the bracket after installation.
3. Sadržaj paketa
Please check the package contents upon opening. If any items are missing or damaged, contact your vendor.
- Fanvil WB101 Wallmount Bracket
- Vijci za montažu (obično uključeni)
- Wall Anchors (typically included)
4. Postavljanje i instalacija
Follow these steps to install the Fanvil WB101 Wallmount Bracket and attach your Fanvil X-series phone.
4.1. Montiranje nosača na zid
- Odaberite lokaciju: Choose a suitable wall location that is structurally sound and allows for easy access to the phone.
- Označite tačke bušenja: Hold the WB101 bracket against the wall at the desired height. Use a pencil to mark the positions for the mounting screws through the designated holes on the bracket.
- Izbušite rupe: Using an appropriate drill bit for your wall type (e.g., masonry for concrete, wood bit for studs), drill pilot holes at the marked locations. If drilling into drywall without a stud, insert wall anchors into the drilled holes.
- Osigurajte nosač: Align the bracket with the drilled holes and secure it to the wall using the provided mounting screws. Ensure the bracket is level and firmly attached.

4.2. Attaching the Phone to the Bracket
The Fanvil WB101 bracket is compatible with Fanvil X1S, X1SP, X3S, X3SP, X3SG, and X3U phones.
- Remove Phone Stand: If your Fanvil phone has a desktop stand attached, remove it according to your phone's instructions.
- Align Phone: Carefully align the mounting points on the back of your Fanvil phone with the corresponding clips and slots on the WB101 wallmount bracket.
- Secure Phone: Gently slide the phone onto the bracket until it clicks into place or is firmly seated. Ensure all clips engage properly. Some phone models may require a screw to further secure the phone to the bracket (refer to your phone's manual for specific details).
- Upravljanje kablovima: Route any necessary cables (e.g., Ethernet, power) through the designated openings on the bracket or phone to maintain a tidy appearance.
5. Upotreba
Once installed, the Fanvil WB101 bracket securely holds your compatible Fanvil IP phone on the wall. This frees up desk space and positions the phone for convenient use in various environments such as offices, reception areas, or common spaces. Ensure all cables are properly connected to the phone for full functionality.
6. Održavanje
- čišćenje: To clean the bracket, gently wipe it with a soft, dry cloth. Avoid using abrasive cleaners or solvents, as these may damage the finish.
- inspekcija: Periodically check the mounting screws and the phone's attachment to the bracket to ensure they remain secure.
7. Otkrivanje problema
- Bracket feels loose on the wall: Ensure mounting screws are tightened sufficiently and wall anchors (if used) are properly installed. The wall surface must be capable of supporting the weight.
- Phone does not fit the bracket: Verify that your phone model is listed as compatible (Fanvil X1S, X1SP, X3S, X3SP, X3SG, X3U). Ensure the phone's desktop stand has been removed.
- Phone is not secure on the bracket: Make sure the phone is correctly aligned with the bracket's clips and slots and fully engaged. Apply gentle pressure until it locks into place.
8. Specifikacije
| Model | Fanvil WB101 |
| Brand | Fanvil |
| Kompatibilni uređaji | Fanvil X1S, X1SP, X3S, X3SP, X3SG, X3U IP Phones |
| Vrsta montaže | Zidna montaža, površinska montaža |
| Boja | Crna |
| Težina artikla | 4.6 unce (130 grama) |
| Dimenzije paketa | 5.51 x 5.35 x 2.13 inča |
| Posebne karakteristike | Space Saving |
9. Garancija i podrška
For warranty information and technical support, please refer to the documentation provided with your Fanvil phone or visit the official Fanvil website. Contact your vendor or Fanvil customer service for assistance with product-related inquiries or issues.





