1. Uvod
This manual provides essential information for the safe and efficient installation, operation, and maintenance of your DAB FEKA 600 MA submersible pump. Please read this manual thoroughly before using the pump and keep it for future reference.
The DAB FEKA 600 MA is a robust submersible pump designed for draining and lifting light wastewater, greywater, and rainwater in domestic and residential environments. It is suitable for both fixed and mobile installations.
2. Sigurnosne informacije
Always observe the following safety precautions to prevent personal injury and damage to the pump.
- električna sigurnost: Ensure the power supply matches the pump's specifications. Always disconnect power before performing any maintenance or installation. Do not operate the pump with a damaged power cord.
- Sigurnost vode: Never touch the pump or the water it is pumping while it is connected to power. This pump is designed for water only; do not use it for flammable, corrosive, or explosive liquids.
- Instalacija: Install the pump in a well-ventilated area. Ensure the pump is stable and cannot tip over. Do not lift the pump by its power cable.
- Djeca i kućni ljubimci: Držite djecu i kućne ljubimce dalje od pumpe i njenog radnog područja.
- Održavanje: Only qualified personnel should perform repairs. Use only genuine replacement parts.
3. Proizvod je gotovview
The DAB FEKA 600 MA pump is engineered for reliability and durability, featuring high-quality materials and a robust design.
Figure 3.1: DAB FEKA 600 MA Submersible Pump - Front View.
Figure 3.2: Key Features of the DAB FEKA 600 MA Pump. This diagram highlights the automatic start/stop float arm, durable construction materials, a flow rate of 15,000 liters per hour, a maximum head of 9 meters, and the ability to handle solids up to 25mm. Note: Official specifications for flow rate and head are provided in Section 8.
3.1 Ključne komponente
- Tijelo pumpe: Constructed from technopolymer for durability.
- Suction Grille: Designed for efficient intake and handling of solids.
- motor: Asynchronous submersible motor for continuous duty, with integrated thermal protection for single-phase versions. Made of AISI 304 stainless steel with an AISI 431 steel shaft for corrosion resistance.
- Plutajući prekidač: Integrated float switch for automatic operation (in automatic versions).
- Triple Seal System: Oil bath triple seal for enhanced reliability.
3.2 Aplikacije
The FEKA 600 MA pump is suitable for various applications, including:
Figure 3.3: Common Applications for the DAB FEKA 600 MA Pump. This image illustrates its use for emptying crawl spaces, pumping dirty water, dewatering construction sites, and managing rainwater.
- Draining crawl spaces
- Pumping dirty water and greywater
- Dewatering construction sites
- Managing rainwater
4. Postavljanje i instalacija
Pravilna instalacija je ključna za performanse i dugotrajnost pumpe. Pažljivo slijedite ove korake.
4.1 Kontrolna lista pred instalaciju
- Ensure the installation site is clear of debris and has adequate space.
- Proverite voltage and frequency match the pump's requirements.
- Prepare the discharge pipe and any necessary fittings.
4.2 Koraci instalacije
- Postavljanje pumpe: Place the pump on a stable, flat surface in the lowest part of the area to be drained. Ensure the suction grille is not obstructed. The minimum admission level is 38 mm.
- Connecting the Discharge Pipe: Attach a suitable discharge pipe to the pump's outlet. Ensure all connections are watertight. The pump has a 1 1/4" G threaded outlet.
- Float Switch Adjustment (for automatic versions): Adjust the float switch cable length to set the desired ON/OFF levels. Ensure the float can move freely without obstruction.
- Priključak za napajanje: Connect the pump to a grounded electrical outlet. Ensure the circuit is protected by a residual current device (RCD).
- testiranje: Before full operation, perform a test run to ensure the pump activates and deactivates correctly and that there are no leaks.
For detailed technical specifications and installation diagrams, refer to the official technical sheet: DAB FEKA Technical Sheet.
5. Uputstvo za upotrebu
The DAB FEKA 600 MA pump is designed for straightforward operation.
5.1 Automatic Operation (with float switch)
- Ensure the pump is properly installed and connected to power.
- Pumpa će se automatski pokrenuti kada nivo vode poraste i podigne plovak.
- The pump will automatically stop when the water level drops and the float switch returns to its lower position.
5.2 Manual Operation (without float switch or for specific tasks)
For manual versions or when bypassing the float switch:
- Connect the pump to power. The pump will begin operating immediately.
- Monitor the water level to prevent the pump from running dry for extended periods. The pump can run dry for up to 1 minute without damage.
- Disconnect the pump from power to stop operation.
Važno: Do not allow the pump to run dry for more than 1 minute. Prolonged dry running can cause damage.
6. Održavanje
Regular maintenance ensures optimal performance and extends the pump's lifespan. Always disconnect the pump from the power supply before any maintenance.
6.1 Cleaning the Pump
- Periodically inspect the suction grille for blockages from debris, leaves, or other solids. Clean as necessary.
- Rinse the pump with clean water after use, especially if pumping heavily contaminated liquids.
6.2 Zimsko skladištenje
If the pump will not be used for an extended period or during freezing temperatures:
- Drain all water from the pump and discharge pipe.
- Temeljno očistite pumpu.
- Pumpu čuvajte na suhom mjestu, zaštićenom od mraza.
6.3 Profesionalno servisiranje
For internal components, motor, or seal inspection, it is recommended to contact a qualified service technician. Do not attempt to disassemble the motor housing.
7. Otkrivanje problema
Prije nego što kontaktirate podršku, ponovoview sljedeći uobičajeni problemi i njihova rješenja.
| Problem | Mogući uzrok | Rješenje |
|---|---|---|
| Pumpa se ne pokreće. | Nema napajanja. Float switch stuck (automatic version). Aktivirana je termička zaštita od preopterećenja. | Provjerite priključak za napajanje i prekidač. Clear any obstructions around the float switch. Allow pump to cool down; it should reset automatically. |
| Pumpa radi, ali voda se ne ispušta. | Suction grille blocked. Discharge pipe blocked or kinked. Air lock in the pump. | Disconnect power and clear the suction grille. Check and clear the discharge pipe. Submerge the pump completely and shake gently to release air. |
| Pumpa se često uključuje i isključuje. | Float switch incorrectly adjusted. Insufficient water volume. | Adjust float switch to allow for a larger water level differential. Ensure adequate water volume for continuous operation. |
| Reduced flow rate. | Partial blockage in suction or discharge. Pump wear. | Clean suction grille and check discharge pipe. Obratite se kvalifikovanom servisnom osoblju radi pregleda. |
8. Tehničke specifikacije
Detailed specifications for the DAB FEKA 600 MA pump.
| Parametar | Vrijednost |
|---|---|
| Model | FEKA 600 MA |
| Snaga | 0.70 HP |
| Voltage | 230 V (2.3E+2 Volts) |
| Max Flow Rate | 16 m³/h (16,000 liters/hour) |
| Max Head | 7.5 m |
| Maksimalna dubina uranjanja | 7 m |
| Pumped Liquid Type | Wastewater and Rainwater |
| Free Passage of Solids | 25 mm |
| Min Admission Level | 38 mm |
| Raspon temperature tekućine | +0°C to +35°C (domestic use) +0°C to +50°C (other uses) |
| Zaštitna klasa | IP 68 |
| Materijal | Technopolymer body, Stainless Steel motor (AISI 304), Steel shaft (AISI 431) |
| Dimenzije (cca.) | 43.4 x 26 x 19.8 cm (pakovanje) 43 x 21 x 29 cm (Pump) |
| Težina (cca.) | 6.24 kg |
For complete technical details, please refer to the official product documentation provided by DAB PUMPS.
9. Garancija i podrška
Information regarding product warranty and customer support.
9.1 Informacije o garanciji
Specific warranty terms and conditions are typically provided with your purchase documentation or can be found on the manufacturer's official webMolimo sačuvajte dokaz o kupovini za potrebe reklamacije.
9.2 Korisnička podrška
For technical assistance, spare parts, or service inquiries, please contact your authorized DAB PUMPS dealer or visit the official DAB PUMPS webstranica za kontakt informacije.
Official commercial profile of the Feka range: DAB FEKA Commercial Profile.
