VisionTek VT2000 USB-C MST 3x Monitor Docking Station Instruction Manual

1. Uvod

The VisionTek VT2000 Triple Display USB-C Dock is designed to expand the connectivity and display capabilities of your laptop, creating a versatile and efficient workstation. This plug-and-play docking station supports up to three external displays and offers a wide array of ports for peripherals, networking, and data transfer.

2. Sadržaj paketa

Provjerite da li su sve stavke prisutne u kutiji:

• VT2000 - Triple Display USB-C Docking Station with Power Passthrough
• USB-C na USB-C kabel (1 m)
• Uputstvo za upotrebu

3. Proizvod je gotovview

The VT2000 docking station provides a comprehensive set of ports to enhance your productivity.

Portovi na prednjoj ploči:

• Svjetlo indikatora napajanja: Označava status napajanja.
• 3.5mm Combo In/Out Audio Jack: Za slušalice ili slušalice s mikrofonom.
• USB 3.0 (5Gbps) Ports: Two USB-C ports and one USB-A port for high-speed data transfer and device connectivity.
• MicroSD Reader: For reading MicroSD cards.
• SD Reader: For reading standard SD cards.

Portovi na zadnjoj ploči:

• Gigabitni Ethernet: RJ45 port for wired network connectivity.
• USB 2.0 (480Mbps) Ports: Two USB-A ports for peripherals like keyboards and mice.
• DisplayPort: Two DisplayPort outputs for connecting external monitors.
• HDMI: One HDMI output for connecting an external monitor.
• USB-C napajanje: Input for the external power adapter (not included).
• USB-C to Host: Povezuje se na USB-C port vašeg laptopa.
• Utor za Kensington Lock: Za osiguranje uređaja.

4. Sistemski zahtjevi

To ensure optimal performance, your system must meet the following requirements:

• Operativni sistem: Windows 11, 10, 8.1, 7 | macOS 10.10 and later
• Hardverski zahtjevi:
  • USB-C Port with DisplayPort Alt Mode
  • USB-C podrška za isporuku napajanja
  • Up to 100W USB-C Power Supply for charging (Note: Power supply not included with the dock)
  • Host System must support DP 1.3 HBR3 for 2 displays @ 4K 30Hz.
  • Host System must support DP 1.3 and have onboard graphics that supports MST for 3 external displays at 1080p.

5. Podešavanje

The VisionTek VT2000 is designed for simple plug-and-play functionality.

1. Priključite napajanje: Plug the external power adapter (not included) into the USB-C Power Supply port on the rear of the docking station and then into a wall outlet.
2. Poveži se s hostom: Use the provided USB-C to USB-C cable to connect the "USB-C to Host" port on the docking station to your laptop's USB-C port.
3. Povežite periferne uređaje: Attach your keyboard, mouse, external storage, and other USB devices to the available USB 3.0 and USB 2.0 ports on the front and rear panels.
4. Povežite monitore: Connect your external monitors to the DisplayPort and HDMI outputs on the rear panel. Refer to the "Display Configuration & Resolutions" section for optimal setup.
5. Mrežna veza: For a wired network connection, plug an Ethernet cable into the Gigabit Ethernet port on the rear panel.
6. Audio uređaji: Connect your headphones or headset to the 3.5mm combo audio jack on the front panel.

6. Operativni

Once connected, your operating system should automatically detect the docking station and connected devices. No additional drivers are typically required for basic functionality.

• Uključivanje/isključivanje: The docking station powers on automatically when connected to a powered laptop.
• Načini prikaza: Utilize your laptop's display settings to configure extended, mirrored, or primary display modes across your connected monitors. The Multi-Stream Transport (MST) technology allows for flexible display arrangements.
• Prijenos podataka: Use the USB 3.0 ports for high-speed data transfer with compatible devices.
• Isporuka struje: The USB-C Power Passthrough port delivers up to 85W to charge your laptop if connected to a compatible power supply.

7. Display Configuration & Resolutions

The VT2000 supports various display configurations and resolutions, depending on your host system's capabilities.

*For Triple Display Output, Host System must have Dedicated Graphics with DP 1.4 and MST Support.

Napomena: Performance and maximum resolutions are dependent on host system's onboard video capabilities. macOS supports one external display extended up to 3840 x 2160 @ 60Hz or one external display mirrored.

8. Održavanje

To ensure the longevity and optimal performance of your VisionTek VT2000 docking station, follow these maintenance guidelines:

• čišćenje: Use a soft, dry cloth to wipe the exterior of the docking station. Avoid using liquid cleaners or aerosol sprays, which may damage the device.
• ventilacija: Osigurajte da je priključna stanica postavljena u dobro prozračenom prostoru kako biste spriječili pregrijavanje. Ne blokirajte ventilacijske otvore.
• Skladištenje: Kada se ne koristi duži period, priključnu stanicu čuvajte na hladnom i suhom mjestu, dalje od direktne sunčeve svjetlosti i ekstremnih temperatura.
• Upravljanje kablovima: Držite kablove organiziranim i ne zapetljanim kako biste spriječili oštećenje priključaka i samih kablova.

9. Otkrivanje problema

If you encounter issues with your VisionTek VT2000 docking station, try the following steps:

• Nema napajanja: Ensure the external power adapter is securely connected to the docking station and a working power outlet.
• Bez prikaza:
  • Verify that the USB-C to Host cable is securely connected to both the laptop and the docking station.
  • Check that monitor cables (DisplayPort, HDMI) are firmly connected to both the docking station and the monitors.
  • Ensure your laptop's display settings are configured correctly for extended or mirrored displays.
  • Confirm your laptop supports DisplayPort Alt Mode via its USB-C port.
• USB uređaji ne rade:
  • Pokušajte spojiti USB uređaj na drugi USB priključak na priključnoj stanici.
  • Connect the USB device directly to your laptop to rule out device issues.
  • Ensure the docking station has sufficient power.
• Problemi s Ethernet vezom:
  • Provjerite Ethernet kabelsku vezu i sa priključnom stanicom i sa ruterom/modemom.
  • Provjerite mrežne postavke na vašem laptopu.
• Zvuk ne radi:
  • Ensure your audio device is correctly plugged into the 3.5mm combo jack.
  • Check your laptop's audio output settings to ensure the docking station's audio is selected.

If problems persist, please contact VisionTek Customer Support for further assistance.

10. Specifikacije

11. Jamstvo i podrška

The VisionTek VT2000 USB-C MST 3x Monitor Docking Station comes with a 2 godine ograničene garancije. To activate your warranty and receive full customer support, please register your product within 30 days of purchase.

For technical assistance, troubleshooting, or warranty claims, please visit the official VisionTek website or contact their customer support team directly. Keep your proof of purchase for warranty validation.