1. Uvod
This manual provides essential information for the safe and efficient operation, setup, and maintenance of your Einhell TE-CC 250 UF Table Saw. Please read these instructions carefully before using the machine for the first time. Keep this manual in a safe place for future reference.
The Einhell TE-CC 250 UF table saw is designed for precise cutting and trimming of various workpieces. It features a durable aluminum table, a precision tungsten carbide saw blade, and a powerful 2000 W motor with soft start functionality. Its design includes features for enhanced safety, precision, and mobility.
2. Opća sigurnosna uputstva
UPOZORENJE: Pročitajte sva sigurnosna upozorenja, upute, ilustracije i specifikacije koje ste dobili uz ovaj električni alat. Nepoštivanje svih dolje navedenih uputstava može dovesti do strujnog udara, požara i/ili teških ozljeda.
- Sigurnost radnog područja: Radno područje održavajte čistim i dobro osvijetljenim. Nered ili tamna područja mogu uzrokovati nesreće. Ne koristite električne alate u eksplozivnim atmosferama, kao što je prisustvo zapaljivih tekućina, plinova ili prašine.
- električna sigurnost: Utikači električnih alata moraju odgovarati utičnici. Nikada ne modificirajte utikač ni na koji način. Izbjegavajte kontakt tijela sa uzemljenim površinama.
- Lična sigurnost: Always wear eye protection, hearing protection, and a dust mask when operating the saw. Do not overreach. Keep proper footing and balance at all times. Dress properly; avoid loose clothing or jewelry.
- Upotreba i održavanje električnog alata: Ne forsirajte električni alat. Koristite odgovarajući električni alat za vašu primjenu. Isključite utikač iz izvora napajanja i/ili izvadite bateriju, ako se može odvojiti, iz električnog alata prije bilo kakvih podešavanja, promjene pribora ili skladištenja električnog alata.
- Sigurnost pri radu sa stolnim pilama: Always use the push stick when cutting small pieces. Ensure the saw blade guard is in place and functioning correctly. Never remove cut-off material while the blade is rotating.
3. Komponente i karakteristike proizvoda
Familiarize yourself with the key components and features of your Einhell TE-CC 250 UF Table Saw.
Ključne karakteristike:
- Precision Tungsten Carbide Saw Blade: Ensures clean and accurate cuts.
- Aluminijski sto: Flat and durable with excellent sliding properties for precise workpiece guidance.
- Proširenja tabela: Extendable to the rear and right side for processing wider workpieces.
- Sliding Carriage: Facilitates long and precise cuts.
- 2-in-1 Saw Blade Adjustment: Allows quick adjustment of saw blade height and inclination.
- Paralelno zaustavljanje: Equipped with double-sided fastening for stable and precise parallel cuts.
- Cross Stop: Features an angle scale for accurate miter cuts.
- Transparent Saw Blade Guard: Improves visibility of the cutting process while maintaining safety.
- Chip Extraction Connection: For connecting a dust extractor to keep the workplace clean.
- Foldable Stand with Wheels (Trolley Function): Provides mobility and easy transport.
- Držač za pribor: For organized storage of tools.
- Overload Switch: Protects the motor from damage due to overvoltage.
- Integrated Soft Start: Protects the motor and electrical fuses during startup.
4. Upute za postavljanje
Before operating the table saw, ensure it is properly assembled and secured.
- Raspakivanje: Pažljivo izvadite sve komponente iz ambalaže. Provjerite da li je došlo do oštećenja tokom transporta.
- Montaža štanda: Assemble the foldable stand according to the diagrams in the separate assembly guide. Ensure all locking mechanisms are securely engaged.
- Mounting the Saw Unit: Securely attach the saw unit to the assembled stand. Verify all bolts and fasteners are tightened.
- Proširenja tabela: Install the table extensions. The main aluminum table can be extended rearwards by 65 mm and to the right by 150 mm. Ensure they slide smoothly and lock into position.
- Parallel Stop Installation: Attach the parallel stop. It features double-sided fastening for stability. Calibrate the scale for accurate measurements.
- Cross Stop Installation: Install the cross stop. This stop includes an angle scale for miter cuts.
- Saw Blade Guard: Ensure the transparent saw blade guard is correctly installed and moves freely.
- Niveliranje: Use the adjustable feet on the stand to ensure the table saw is stable and level on your work surface.
- Usisavanje prašine: Connect a suitable dust extraction system to the chip extraction port for a cleaner and safer working environment.
5. Uputstvo za upotrebu
Slijedite ove korake za siguran i efikasan rad vaše stolne pile.
- Priključak za napajanje: Connect the saw to a suitable 230 Volt power supply. The integrated soft start feature will manage the initial power surge.
- Podešavanje visine oštrice: Use the 2-in-1 adjustment mechanism to set the saw blade height. The blade should extend slightly above the workpiece for optimal cutting.
- Blade Angle Adjustment: Adjust the saw blade inclination for miter cuts using the same 2-in-1 adjustment. The cross stop has an angle scale to guide you.
- Setting Stops: Position the parallel stop for rip cuts or the cross stop for cross-cuts and miter cuts. Ensure they are securely fastened and aligned with your desired measurement.
- Postavljanje radnog komada: Place the workpiece firmly against the fence and the table. Ensure it is stable and will not shift during the cut.
- Using the Push Stick: Always use the provided push stick when cutting narrow or short workpieces to keep your hands safely away from the blade.
- Pokretanje testere: Press the green 'ON' button (Figure 6) to start the saw. Allow the blade to reach full speed before beginning the cut.
- Pravljenje reza: Feed the workpiece slowly and steadily into the blade. Maintain firm pressure against the fence and the table.
- Zaustavljanje pile: After completing the cut, press the red 'OFF' button (Figure 6). Wait for the blade to come to a complete stop before removing the workpiece or any cut-off material.
- Zaštita od preopterećenja: If the motor experiences an overload, the overload switch will activate to protect the motor. If this occurs, turn off the saw, allow it to cool, and reduce the load before restarting.
6. Održavanje
Redovno održavanje osigurava dugotrajnost i siguran rad vaše stolne pile.
- čišćenje: After each use, disconnect the power and clean the saw. Remove sawdust and debris from the table, blade guard, and motor housing. Use a brush or compressed air.
- Inspekcija oštrice: Redovno provjeravajte oštrinu pile da li je oštrica oštećena ili da li nedostaju zubi. Odmah zamijenite tupe ili oštećene listove.
- podmazivanje: Povremeno podmazujte pokretne dijelove kako je navedeno u detaljnom priručniku za proizvod (nije ovdje priložen).
- Provjera pričvršćivača: Check all bolts, nuts, and screws regularly to ensure they are tight. Tighten any loose fasteners.
- Sistem za usisavanje prašine: Ensure the dust extraction port and connected system are clear of blockages.
- Skladištenje: When not in use, store the table saw in a dry, secure location. The foldable stand and trolley function (Figure 3) make it easier to move and store.
7. Otkrivanje problema
Ovaj odjeljak se bavi uobičajenim problemima s kojima se možete susresti.
| Problem | Mogući uzrok | Rješenje |
|---|---|---|
| Testera se ne pokreće | No power supply; Overload switch tripped; Faulty switch | Check power connection; Reset overload switch; Contact customer support |
| Loš kvalitet reza (grub, cijepanje) | Dull or incorrect blade; Incorrect blade height; Workpiece not secured | Replace blade; Adjust blade height; Secure workpiece firmly |
| Motor overheats or stops | Overload; Insufficient ventilation; Dull blade | Reduce feed rate; Ensure clear ventilation; Replace blade |
| Pretjerane vibracije | Loose blade; Unstable setup; Damaged blade | Check blade mounting; Ensure saw is level and stable; Replace blade |
8. Tehničke specifikacije
| Specifikacija | Vrijednost |
|---|---|
| Broj modela | 4340539 |
| Snaga | 2000 Watts |
| Voltage | 230 Volts |
| Dužina / prečnik oštrice | 250 milimetara |
| Materijal oštrice | Karbid |
| Broj zuba | 48 |
| Brzina | 6000 o/min |
| Max. Dubina rezanja na 90° | 78 mm |
| Max. Dubina rezanja na 45° | 53 mm |
| Dimenzije proizvoda (D x Š x V) | 89 x 84 x 105 cm |
| Težina artikla | 34.91 kilograma |
| Materijal ručke/poluge | Aluminijum |
| Posebne karakteristike | Depth Adjustment, Soft Start, Trolley Function |
9. Informacije o garanciji
Einhell products are designed for quality and durability. This product comes with a standard warranty. Additionally, Einhell offers extended warranty services for certain products, such as a 3-year warranty on Power X-Change batteries upon online registration.
To activate any extended warranty services, products must be registered on the official Einhell website within 30 days of purchase. Please refer to the official Einhell website or your purchase documentation for specific warranty terms and conditions applicable to your product.
10. Korisnička podrška
For further assistance, spare parts, or service inquiries, please contact Einhell customer support or visit their official website.
Više informacija i kontakt podatke možete pronaći posjetom Prodavnica robne marke Einhell.
