1. Sigurnosne informacije
Please read all safety instructions carefully before installing or operating this product. Failure to follow these instructions may result in electric shock, fire, or other hazards.
- Izvor napajanja: Koristite samo priloženi adapter za napajanje. Provjerite jačinu napajanja.tage odgovara zahtjevima proizvoda.
- Voda i vlaga: Do not expose this product to water, moisture, or extreme humidity. Avoid installation in areas where water contact is possible.
- toplina: Do not install near heat sources such as radiators, heat registers, stoves, or other apparatus that produce heat.
- ventilacija: Osigurajte odgovarajuću ventilaciju oko amplifier unit. Do not block any ventilation openings.
- Instalacija: Installation should be performed by qualified personnel following local electrical codes. Ensure all wiring is secure and properly insulated.
- čišćenje: Disconnect power before cleaning. Use a dry cloth only. Do not use liquid cleaners or aerosol cleaners.
- servisiranje: Ne pokušavajte sami servisirati ovaj proizvod. Sve servise prepustite kvalificiranom servisnom osoblju.
2. Proizvod je gotovview
The Herdio 5.25'' Home Audio Package provides a versatile sound solution for various indoor environments. It includes a wall-mount Bluetooth amplifier receiver and two 5.25-inch in-ceiling passive speakers. The system supports multiple audio input options, including Bluetooth, AUX, and USB, along with a microphone input for paging or announcements.
2.1. Wall Mount Bluetooth AmpLifier Receiver
Ovaj kompakt amplifier unit is designed to fit into a standard wall plate, offering convenient access to controls and connectivity. It features a master volume knob, input selection switch, USB port for media playback and device charging, a 3.5mm AUX-in jack, and a 1/4'' MIC-in jack.
Slika 1: Zidni nosač Amplifier Controls. This image displays the front panel of the wall-mount amplifier, detailing the power LED, input selection switch (AUX, BT, MIC), USB port, master volume/power knob, MIC IN jack, and AUX IN jack.
Figure 2: USB Interface. This image shows a USB flash drive inserted into the USB input port on the wall-mount amplifier, illustrating its function for media playback or device charging.
2.2. 5.25-inch In-Ceiling Passive Speakers
The system includes two 5.25-inch passive speakers designed for flush mounting in ceilings or walls. These speakers are engineered to reproduce clear sound with good responsiveness, suitable for various audio applications.
Figure 3: In-Ceiling Speaker Design. This image highlights the speaker's design, emphasizing its powerful bass capabilities and integrated coaxial tweeter for balanced audio output.
3. Šta se nalazi u kutiji
Pažljivo raspakujte sadržaj i provjerite da li su svi predmeti prisutni:
- 1x Bluetooth In-Wall Audio Receiver Wall Plate
- 1x 12V napajanje
- 2x Screws for Wall Plate Installation
- 2x 5.25-inch In-Ceiling Speakers (Model HCS-528)
- 2x Speaker Wires
- 1x User Manual for Amplifier
- 1x User Manual for Speakers
- 2x Gaskets for Speakers
- 1x Cutout Template for Speakers
Figure 4: Package Contents. This image displays all components included in the Herdio 5.25'' Home Audio Package, laid out for verification.
Video 1: Herdio Home Audio Package Unboxing. This video demonstrates the unboxing process and shows all included components of the Herdio audio package.
4. Podešavanje
4.1. Zidni nosač Ampinstalacija podizača
- Pripremite zid: Ensure you have a standard electrical wall box available for installation.
- Povežite kabl za napajanje: Connect the 12V DC power cable (red positive, black negative) to the two-pin connector on the back of the ampmodul za podizanje.
- Spojite audio kabel: Connect the stereo input audio cable to the three-pin connector on the back of the ampmodul za podizanje.
- Montirajte Ampdizalica: Pažljivo umetnite amplifier module into the wall box. Secure it using the provided screws.
- Pričvrstite prednju ploču: Place the decorative faceplate over the amplifier and secure it.
Slika 5: Zidni nosač Amplifier Installation. This image illustrates the process of installing the wall-mount amplifier into a standard electrical box.
Video 2: Herdio Wall Mount Amplifier Installation. This video provides a step-by-step guide on how to install the wall-mount ampLifier sistem.
4.2. Ceiling Speaker Installation
- Odredite lokaciju: Choose appropriate locations in the ceiling or wall for the speakers, ensuring no obstructions behind the surface.
- Otvaranje rezanja: Use the provided cutout template to mark and cut a circular opening in the ceiling/wall. The cutout diameter is 7.3 inches (18.5 cm).
- Remove Speaker Grille: Gently remove the speaker grille using a small tool or screwdriver.
- Umetni zvučnik: Umetnite zvučnik u izrezani otvor.
- Sigurni govornik: Tighten the speaker clips with screws to firmly secure the speaker in place.
- Replace Grille: Carefully place the speaker grille back onto the speaker.
Figure 6: Installation Dimensions. This diagram provides the total speaker diameter (8.46 inches / 21.5 cm), cutout diameter (7.3 inches / 18.5 cm), speaker depth (4.33 inches / 11 cm), and wall plate dimensions (4.5 inches / 11.43 cm height, 2.75 inches / 6.89 cm width).
Figure 7: Removing Speaker Grille. This image shows how to carefully remove the speaker's protective grille.
Figure 8: Securing Speaker Clips. This image demonstrates tightening the speaker clips with screws to ensure a secure fit in the ceiling or wall.
Figure 9: Replacing Speaker Grille. This image shows the final step of placing the speaker grille back onto the installed speaker.
4.3. Ožičenje sistema
- Connect Speaker Wires to Speakers: Connect the provided speaker wires to the terminals on the back of each speaker. Ensure red wire connects to positive (+) and black wire to negative (-).
- Connect Speaker Wires to Ampdizalica: Connect the other end of the speaker wires to the speaker output terminals on the back of the wall-mount amplifier. Use a screwdriver to loosen the terminal screws, insert the wires (red to SPK+, black to SPK-), and tighten the screws to secure the connection.
- Povežite napajanje: Plug the 12V power supply into a standard electrical outlet and connect its DC plug to the 12V DC input jack on the wall-mount amplifier.
Video 3: Wiring and Bluetooth Pairing. This video demonstrates how to connect the speaker cables to the amplifier and speakers, and then how to pair a Bluetooth device.
5. Uputstvo za upotrebu
5.1. Uključivanje/isključivanje i kontrola jačine zvuka
To power on the system, turn the master volume knob clockwise. You will hear an audible 'drop' sound, and the power LED (PWR) will illuminate. Continue turning the knob clockwise to increase the volume. To power off, turn the knob counter-clockwise until it clicks.
5.2. Izbor ulaza
Use the input selection switch on the amplifier's front panel to choose between AUX, BT (Bluetooth), or MIC inputs.
5.3. Bluetooth uparivanje
- Switch the input selector to 'BT'. The Bluetooth LED will flash, indicating it is in pairing mode.
- Na svom mobilnom uređaju (pametnom telefonu, tabletu itd.) omogućite Bluetooth i potražite dostupne uređaje.
- Select 'Herdio' from the list of available devices to pair.
- Once successfully paired, the Bluetooth LED on the amplifier will remain steadily lit.
- You can now play audio from your device through the Herdio speaker system.
5.4. Using USB Input
Insert a USB flash drive into the USB INPUT port for media playback. The ampLiferier će automatski detektovati i reprodukovati zvuk files. This port also functions as a charging port for compatible devices (5V/1A).
5.5. Using AUX-In
Connect an external audio device (e.g., MP3 player, TV) to the 3.5mm AUX IN jack using a stereo audio cable. Switch the input selector to 'AUX' to play audio from the connected device.
5.6. Using MIC-In
Connect a microphone to the 1/4'' MIC IN jack. Switch the input selector to 'MIC' for microphone input. This feature is suitable for paging or making announcements.
6. Održavanje
To ensure the longevity and optimal performance of your Herdio audio system, follow these maintenance guidelines:
- čišćenje: Za čišćenje koristite meku, suhu krpu amplifier faceplate and speaker grilles. Avoid abrasive cleaners, solvents, or harsh chemicals.
- Uklanjanje prašine: Redovno brišite prašinu sa rešetki zvučnika kako biste spriječili nakupljanje prašine koje bi moglo utjecati na kvalitetu zvuka.
- Uslovi okoline: Keep the system in a dry environment, away from direct sunlight, extreme temperatures, and excessive dust.
- Inspekcija ožičenja: Periodically check all wiring connections for tightness and signs of wear. Loose connections can lead to poor sound quality or intermittent operation.
7. Otkrivanje problema
If you encounter issues with your Herdio audio system, refer to the following common problems and solutions:
| Problem | Mogući uzrok | Rješenje |
|---|---|---|
| Nema zvuka iz zvučnika |
|
|
| Bluetooth se ne povezuje |
|
|
| Izobličen zvuk |
|
|
| USB reprodukcija ne radi |
|
|
8. Specifikacije
| Feature | Detalj |
|---|---|
| Naziv modela | HCS 528-16BT |
| Vrsta montaže | Ceiling Mount (Speakers), Wall Mount (Ampdizalica) |
| Vrsta zvučnika | Surround Sound, 2-Way In-Ceiling Passive Speakers |
| Veličina zvučnika | 5.25 inča (niskotonski zvučnik), 1 inč (visokotonski zvučnik) |
| Maksimalna izlazna snaga zvučnika | 300 Watts |
| Frekvencijski odziv | 20 KHz |
| Tehnologija povezivanja | Bluetooth |
| Bežična komunikacijska tehnologija | Bluetooth |
| Bluetooth domet | 30 metara |
| Posebne karakteristike | AUX Input, USB Input (Media Playback/Charging), MIC Input |
| Izvor napajanja | Električni sa kablom (12V DC) |
| Dimenzije proizvoda (Ampdizalica) | 4.5"H x 2.75"W (Wall Plate) |
| Product Dimensions (Speakers) | 8.46"D x 7.3"W x 4.33"H (Total Diameter x Cutout Diameter x Depth) |
| Materijal | akrilonitril butadien stiren (ABS) |
| Težina artikla | 7.04 funti (ukupno pakovanje) |
| Unutrašnja/vanjska upotreba | Indoor |
9. Garancija i podrška
This Herdio product is covered by a 1-godišnja garancija na servis od datuma kupovine. Ova garancija pokriva nedostatke u proizvodnji i izradi pri normalnoj upotrebi.
Garancija ne pokriva štetu uzrokovanu:
- Nepravilna instalacija ili rad.
- Accidents, misuse, abuse, or negligence.
- Neovlaštene popravke ili modifikacije.
- Prenaponi ili udari groma.
For warranty claims, technical support, or customer service, please contact Herdio customer support through your retailer or visit the official Herdio webstranica za kontakt informacije.
