Canarm Unity 36-inch 4-Blade White Ceiling Fan with Light

1. Sigurnosne informacije

Read all instructions carefully before beginning installation. Failure to follow these instructions may result in electrical shock, fire, or personal injury.

• Uvijek isključite napajanje na prekidaču ili razvodnoj kutiji prije instalacije ili servisiranja.
• Sve instalacije moraju biti u skladu s nacionalnim i lokalnim električnim propisima. Ako niste upoznati s instalacijama, obratite se kvalificiranom električaru.
• Osigurajte da mjesto instalacije može podnijeti težinu ventilatora (približno 3.53 kg).
• Ne koristite ventilator s oštećenim lopaticama ili kućištem.
• Maintain a minimum clearance of 7 feet (2.1 meters) from the floor to the bottom edge of the fan blades.
• Ne stavljajte predmete u putanju lopatica ventilatora.

2. Sadržaj paketa

Verify that all components listed below are present before beginning installation. If any parts are missing or damaged, do not proceed with installation and contact customer support.

• Sklop kućišta motora
• Fan Blades (4) - Reversible white/bleached oak
• Nosači oštrica (4)
• Downrod
• Nadstrešnica
• Montažni nosač
• Light Kit Assembly
• Mushroom Globe Glass
• Pull Chains (2)
• Paket hardvera (vijci, podloške, matice)

Slika 2.1: Gotovoview of the Canarm Unity Ceiling Fan with Light, displaying the motor housing, four blades, and the central mushroom globe light.

3. Postavljanje i instalacija

Preporučuje se profesionalna instalacija. Prije nego što nastavite, provjerite je li napajanje isključeno na prekidaču.

3.1 Montiranje ventilatora

1. Pričvrstite nosač za montažu na razvodnu kutiju na plafonu. Provjerite da je razvodna kutija sigurno pričvršćena za konstrukciju zgrade i da može podnijeti težinu ventilatora.
2. Feed the electrical wires from the junction box through the center hole of the mounting bracket.
3. Attach the downrod to the motor housing, ensuring all screws are tightened.
4. Carefully lift the fan assembly and hang it from the mounting bracket using the hook provided on the downrod.

3.2 Električne veze

Connect the fan's electrical wires to the household wiring according to the following:

• Connect the green/bare copper wire (ground) from the fan to the ground wire from the junction box.
• Connect the white wire (neutral) from the fan to the white wire from the junction box.
• Connect the black wire (hot for fan) from the fan to the black wire from the junction box.
• Connect the blue wire (hot for light) from the fan to the black or blue wire from the junction box (if separate light switch).
• Secure all connections with wire nuts and ensure no loose strands of wire are exposed.

3.3 Pričvršćivanje lopatica ventilatora

1. Attach each blade to a blade bracket using the provided screws. Ensure the desired blade finish (white or bleached oak) is facing downwards.
2. Secure each blade assembly to the motor housing using the screws provided. Ensure all screws are tight.

Figure 3.3: Images showing the blade attachment points on the motor housing (left) and the assembled blades from a top-down perspective (right).

3.4 Instaliranje kompleta rasvjete

1. Connect the light kit wires to the corresponding wires from the fan motor housing (usually white to white, blue to black).
2. Secure the light kit assembly to the bottom of the motor housing with the provided screws.
3. Install the appropriate light bulb(s) (not included) into the sockets.
4. Carefully attach the mushroom globe glass to the light kit by twisting or securing with screws, depending on the design.

Slika 3.4: Krupni plan view of the fan's light kit with the mushroom globe glass.

3.5 Završnih koraka

1. Carefully slide the canopy up against the ceiling and secure it with the provided screws.
2. Vratite napajanje na prekidač.

4. Uputstvo za upotrebu

The Canarm Unity ceiling fan is operated by two pull chains.

• Kontrola brzine ventilatora: One pull chain controls the fan speed. Pull the chain repeatedly to cycle through the three available speeds (High, Medium, Low) and Off.
• Kontrola svjetla: The second pull chain controls the light. Pull the chain to turn the light On or Off.
• Obrtanje oštrice: To change the direction of the fan blades (e.g., for summer cooling or winter heat circulation), locate the slide switch on the motor housing. With the fan off, slide the switch to the opposite position. This fan features reversible white/bleached oak blades.

Figure 4.1: The Canarm Unity fan installed, demonstrating its function within a living space.

5. Održavanje

Redovno održavanje osigurava optimalne performanse i produžava vijek trajanja vašeg stropnog ventilatora.

• čišćenje: Povremeno čistite lopatice ventilatora i kućište motora mekom krpomamp tkanina. Nemojte koristiti abrazivna sredstva za čišćenje ili rastvarače.
• Vijci za pritezanje: Check all screws on the blade attachments and mounting hardware annually. Tighten any loose screws to prevent wobbling or noise.
• Zamjena sijalice: Disconnect power before replacing light bulbs. Allow bulbs to cool before handling. Use bulbs of the correct wattage and type as specified in the fan's electrical ratings.

6. Otkrivanje problema

Before attempting any repairs, ensure power is disconnected at the circuit breaker.

7. Specifikacije

8. Garancija i podrška

This product is covered by the manufacturer's standard warranty. Please refer to the warranty card included in your original packaging for specific terms and conditions.

For technical assistance, missing parts, or warranty claims, please contact Canarm customer support. Contact information can typically be found on the manufacturer's webweb-mjestu ili na ambalaži proizvoda.

Molimo sačuvajte ovaj priručnik za buduću upotrebu.