ANENG V01B 4000 Counts digitalni multimetar korisnički priručnik

1. Uvod

This manual provides detailed instructions for the safe and effective use of the ANENG V01B Digital Multimeter. This device is a battery-powered, true-RMS, auto-ranging digital multimeter featuring a 4000-count LCD display with backlight and flashlight functions. It is designed for measuring various electrical parameters in automotive and general electrical applications.

2. Sigurnosne informacije

Read all safety warnings and instructions carefully before using this multimeter. Failure to follow these instructions may result in electric shock, fire, or damage to the instrument.

• Ne unos voltage u strujnom režimu, režimu otpora, režimu diode, režimu kontinuiteta ili režimu temperature.
• Ne unos voltage exceeding 36V DC or 25V AC when you are in the setting of measuring current.
• Uvijek se uvjerite da su mjerni kablovi pravilno spojeni i da je funkcijski prekidač postavljen na ispravan raspon prije bilo kakvog mjerenja.
• Isključite napajanje strujnog kola i ispraznite sve visokonaponsketagkondenzatore prije mjerenja otpora, kontinuiteta, dioda ili kapacitivnosti.
• Budite oprezni kada radite sa voltagiznad 30V AC RMS, 42V peak ili 60V DC. Ovi volumenitagpredstavljaju opasnost od strujnog udara.
• Zamijenite baterije kada se pojavi indikator slabe baterije kako biste osigurali tačna očitavanja.
• Ne koristite mjerač ako izgleda oštećeno ili ako je kućište otvoreno.

3. Proizvod je gotovview

The ANENG V01B is a compact and versatile digital multimeter.

3.1. Dimenzije proizvoda

The multimeter measures approximately 119.5mm (4.70in) in length, 61.7mm (2.43in) in width, and 31.9mm (1.25in) in thickness. Note: Manual measurement may have an error of 10-20 mm.

3.2. Karakteristike stražnje ploče

The back of the multimeter features a battery slot for easy access and a retractable bracket for convenient positioning. It also includes a high-brightness flashlight to assist in measurements in low-light conditions.

The back of the product also houses the NCV (Non-Contact Voltage) sensing point and the LED lighting for the flashlight function.

4. Podešavanje

4.1. Instalacija baterije

The ANENG V01B multimeter requires batteries for operation.

1. Locate the battery slot cover on the back of the multimeter.
2. Koristite odvijač da biste odvrnuli vijak koji pričvršćuje poklopac baterije.
3. Pažljivo uklonite poklopac baterije.
4. Insert the required batteries (typically AAA, refer to the battery compartment for specific type and polarity) ensuring correct polarity.
5. Vratite poklopac baterije i pričvrstite ga vijkom.

5. Uputstvo za upotrebu

5.1. Panel Function Introduction

The front panel of the ANENG V01B multimeter features a rotary switch for function selection, an LCD display, and various input jacks.

• Prikaz: 4000 counts LCD for reading measurements.
• On-off detection/Buzzer: For continuity testing.
• Function conversion button (SEL): Used to switch between different functions within a single rotary switch position (e.g., AC/DC voltage, dioda/kontinuitet).
• AD/DC millivolt voltage (hertz): Measures small AC/DC voltages and frequency.
• ISKLJUČENO: Isključuje multimetar.
• AD/DC voltage (hertz): Standardne mjere AC/DC jačinetages and frequency.
• Uključivanje/isključivanje: Glavni prekidač za napajanje.
• "10A" Input: Input jack for high current measurements (up to 10A).
• "COM" Input: Common (negative) input jack for all measurements.
• "VΩHz" Input: Ulazni priključak za jačinu zvukatage, mjerenja otpora, frekvencije, kapaciteta, diode i kontinuiteta.
• AD/DC current (mA): Measures small AC/DC currents (milliamperes).
• AD/DC current (amperes): Measures standard AC/DC currents (amperes).
• NCV non-contact power alarm: Otkriva AC voltage bez direktnog kontakta.
• Data retention/Backlight (HOLD/*): Holds the current reading on the display and activates/deactivates the backlight.
• Resistance detection: Mjeri električni otpor.

5.2. Measuring Current Safely

Važno sigurnosno upozorenje: Incorrect current measurement can damage the instrument.

Do not directly contact a live circuit to measure current like measuring voltage. Direct contact will burn out the instrument. This drawing is for reference only to illustrate an incorrect method.

To measure current correctly, the multimeter must be connected in serije with the circuit. This means the circuit must be broken, and the multimeter inserted into the break so that the current flows through the multimeter.

Steps for Current Measurement:

1. Isključite strujno kolo.
2. Prekinite strujni krug tamo gdje želite izmjeriti struju.
3. Connect the red test lead to the appropriate current input jack (e.g., "10A" or "mA") on the multimeter.
4. Connect the black test lead to the "COM" input jack.
5. Connect the test leads in series with the circuit, ensuring the current flows through the multimeter.
6. Select the appropriate current range on the rotary switch.
7. Restore power to the circuit and read the measurement.
8. After measurement, turn off power, disconnect the multimeter, and restore the circuit.

6. Održavanje

6.1. Opća njega

Održavajte multimetar suvim. Ako se pokvasi, odmah je obrišite.

Koristite i čuvajte multimetar u normalnim temperaturnim okruženjima. Ekstremne temperature mogu skratiti vijek trajanja elektroničkih uređaja.

Pažljivo i pažljivo rukujte multimetrom. Ispuštanje može oštetiti štampane ploče i kućišta.

Držite multimetar dalje od prašine i prljavštine, koji mogu uzrokovati koroziju elektroničkih komponenti.

Obrišite multimetar oglasomamp povremeno krpu kako bi izgledala kao nova. Ne koristite jake kemikalije, otapala za čišćenje ili jake deterdžente.

6.2. Zamjena baterije

When the low battery indicator appears on the display, replace the batteries promptly to ensure accurate readings and proper operation. Refer to the "Battery Installation" section for instructions.

7. Otkrivanje problema

7.1. Skok vrijednosti u milivoltima

A "millivolt value jump" (non-zero reading) when the multimeter is set to the mV range and no input is connected is a normal phenomenon.

This can occur due to:

1. Excessive changes in ambient temperature and humidity in the air, leading to a non-return to zero.
2. Jaka interferencija električnog polja ili magnetskog polja.

If the multimeter does not return to zero in the mV file, you can short the red and black test leads together. The display should then show zero or a very small, stable value. If the issue persists, ensure the environment is free from strong interference.

8. Specifikacije

9. Garancija i podrška

Information regarding warranty coverage and customer support for the ANENG V01B Digital Multimeter is not available in this document. Please refer to the product packaging or contact the retailer/manufacturer directly for details.