Einhell TC-SM 2131/1 Radijalna ugaona pila i MSS 1610 stalak Uputstvo za upotrebu

1. Uvod

This manual provides essential information for the safe and effective operation, maintenance, and troubleshooting of your Einhell TC-SM 2131/1 Radial Miter Saw and MSS 1610 Stationary Stand. Please read this manual thoroughly before initial use and keep it for future reference.

The Einhell TC-SM 2131/1 radial miter saw is designed for cutting wood, laminated panels, and plastic. It enables clean miter cuts and precise length cuts. The integrated sliding function allows for cutting particularly wide workpieces. The MSS 1610 stand provides a stable and ergonomic base for the miter saw, with adjustable workpiece supports for larger materials.

2. Sigurnosna uputstva

Opća sigurnosna upozorenja:

• Uvijek nosite odgovarajuću ličnu zaštitnu opremu (LZO), uključujući zaštitne naočale, zaštitu za sluh i masku za prašinu.
• Osigurajte da je radni prostor čist, dobro osvijetljen i bez prepreka.
• Držite podalje djecu i osobe u blizini dok radite s testerom.
• Nemojte koristiti električne alate u eksplozivnoj atmosferi, kao što je prisustvo zapaljivih tečnosti, gasova ili prašine.
• Always disconnect the saw from the power source before making any adjustments, changing accessories, or performing maintenance.
• Prije rezanja čvrsto pričvrstite radni komad.
• Never reach into the cutting area while the saw is running.
• Use only sharp and correctly sized saw blades.

Sigurnost pri radu s ugaonom pilom:

• Ensure the blade guard is functioning correctly before each use.
• Ne pokušavajte rezati materijale koji su premali da bi se mogli sigurno pričvrstiti.amped.
• Prije početka rezanja, pustite da sečivo dostigne punu brzinu.
• Maintain a firm grip on the handle and guide the saw smoothly through the material.

3. Komponente proizvoda

Familiarize yourself with the main components of your Einhell TC-SM 2131/1 Radial Miter Saw and MSS 1610 Stand.

Slika 3.1: Einhell TC-SM 2131/1 Radial Miter Saw. This image shows the complete miter saw unit, highlighting its main body, saw blade, motor housing, handle, and base with angle adjustments.

Slika 3.2: Einhell MSS 1610 Stationary Stand. This image displays the foldable stand with its adjustable legs and extendable workpiece supports, designed to provide a stable platform for the miter saw.

Slika 3.3: Close-up of Miter Saw Blade and Laser Guide. This detailed view focuses on the saw blade, transparent blade guard, and the integrated laser guide, which projects a line onto the workpiece for precise alignment.

Slika 3.4: Einhell MSS 1610 Stand with Miter Saw Mounted. This image illustrates the miter saw securely attached to the MSS 1610 stand, demonstrating how the two components integrate for stable operation.

Slika 3.5: User Operating Einhell Miter Saw on Stand Outdoors. This image shows a user wearing safety glasses, operating the miter saw mounted on the MSS 1610 stand in an outdoor setting, demonstrating practical use.

4. Postavljanje i montaža

Follow these steps to set up your Einhell TC-SM 2131/1 Miter Saw and assemble the MSS 1610 Stand.

4.1 Assembling the MSS 1610 Stand

1. Unpack all components of the MSS 1610 stand.
2. Extend the legs of the stand and lock them into position. Ensure all four legs are stable and level.
3. Attach the extendable workpiece supports to the main frame of the stand. Adjust their height as needed for your working comfort.

4.2 Mounting the TC-SM 2131/1 Miter Saw

1. Place the TC-SM 2131/1 miter saw onto the mounting brackets of the MSS 1610 stand.
2. Secure the saw to the stand using the provided fasteners. Ensure it is firmly attached and does not wobble.
3. Connect the saw to a suitable power outlet (230V AC).

5. Uputstvo za upotrebu

This section details the proper procedures for operating your miter saw.

5.1 Osnovni rad

1. Pripremite radni komad: Ensure the material to be cut is clean and free of foreign objects.
2. Osigurajte radni komad: Place the workpiece firmly against the fence and clamp it securely using the integrated clamping device.
3. Podesite uglove: For miter cuts, adjust the turntable to the desired angle (left or right). For bevel cuts, tilt the saw head to the desired angle (left or right). The saw head can be continuously tilted for flexibility.
4. Activate Laser Guide: Turn on the laser guide to project the cutting line onto the workpiece for precise alignment.
5. Pokrenite pilu: Press the power switch to start the motor. Allow the blade to reach full operating speed before beginning the cut.
6. Izvršite rezanje: Slowly and steadily lower the saw blade through the workpiece. For wide workpieces, utilize the integrated sliding function by pulling the saw head towards you, lowering it, and pushing it through the material.
7. Završite rez: Nakon što je rez završen, otpustite prekidač za napajanje i pričekajte da se list pile potpuno zaustavi prije nego što podignete glavu pile.
8. Uklonite radni komad: Carefully remove the cut workpiece.

5.2 Adjusting the Depth of Cut

The TC-SM 2131/1 features a depth adjustment function. To adjust the cutting depth, locate the depth stop mechanism, typically a screw or lever, and set it to the desired depth. This is useful for making grooves or partial cuts.

5.3 Using the Workpiece Supports

The MSS 1610 stand includes extendable workpiece supports. These can be extended outwards to support longer materials, ensuring stability and accuracy during cuts. Adjust the height of these supports to match the height of the saw's cutting surface.

6. Održavanje i njega

Regular maintenance ensures the longevity and optimal performance of your Einhell miter saw and stand.

6.1 Čišćenje

• After each use, disconnect the saw from power and clean off sawdust and debris using a brush or compressed air.
• Pay special attention to the blade guard, motor vents, and sliding mechanisms.
• Oglasom obrišite vanjske površineamp tkanina. Nemojte koristiti jake hemikalije ili rastvarače.

6.2 Zamjena oštrice

1. Sigurnost na prvom mjestu: Always disconnect the saw from the power supply.
2. Pristupna oštrica: Lift the blade guard and locate the blade retaining bolt.
3. Loosen Bolt: Use the appropriate wrench to loosen the blade retaining bolt while holding the blade stationary with the spindle lock button.
4. Uklonite staru oštricu: Pažljivo uklonite staru oštricu, vodeći računa o smjeru njene rotacije.
5. Instalirajte novu oštricu: Place the new blade onto the arbor, ensuring the teeth are oriented correctly for cutting (usually indicated by an arrow on the blade and saw).
6. Zategnite vijak: Re-tighten the blade retaining bolt securely.
7. Provjeri zaštitu: Ensure the blade guard moves freely and covers the blade properly.

6.3 Podmazivanje

Periodically apply a light lubricant to the sliding rails of the saw to ensure smooth operation of the integrated sliding function.

6.4 Skladištenje

Store the saw and stand in a dry, secure location, away from moisture and extreme temperatures. The MSS 1610 stand is foldable for compact storage.

7. Otkrivanje problema

Ovaj odjeljak pruža rješenja za uobičajene probleme s kojima se možete susresti.

8. Tehničke specifikacije

Einhell TC-SM 2131/1 Radial Miter Saw

• Model: TC-SM 2131/1
• Ulazna snaga: 1800 W (maks.)
• Brzina bez opterećenja: 4900 RPM
• Voltage: 230 V AC
• Prečnik oštrice: 210 mm (Tungsten Carbide-tipped blade included)
• Posebne karakteristike: Integrated sliding function, Laser guide, Depth adjustment
• Preporučena površina: Wood, Laminated panels, Plastic

Einhell MSS 1610 Stationary Stand

• Model: MSS 1610
• Materijal: Aluminijum
• Karakteristike: Extendable workpiece supports, Height adjustable, Foldable design

9. Garancija i podrška

For warranty information and customer support, please refer to the warranty card included with your product or visit the official Einhell webSačuvajte dokaz o kupovini za eventualne reklamacije.

Einhell Official Webstranica: www.einhell.com