Google Nest Learning Thermostat & Smart Plugs User Manual

Uvod

This manual provides comprehensive instructions for the installation, operation, and maintenance of your Google Nest T3019US Learning Thermostat 3rd Gen and the accompanying Deco Gear WiFi Smart Plugs. Please read this manual thoroughly before using the devices to ensure proper functionality and safety.

Image: The Google Nest Learning Thermostat (top) and two Deco Gear WiFi Smart Plugs (bottom).

Važne informacije o sigurnosti

Always adhere to the following safety guidelines to prevent damage to the devices or personal injury:

• Ensure power to your HVAC system is turned off at the circuit breaker before installing the thermostat.
• The Google Nest Thermostat operates on 24 volti (AC). Verify your system's compatibility before installation.
• Do not attempt to open or modify the devices. Refer all servicing to qualified personnel.
• Keep smart plugs away from water or damp okruženja.
• Do not overload the smart plugs beyond their rated electrical capacity.

Sadržaj paketa

Provjerite da li se sve stavke nalaze u vašem paketu:

• 1 x Google Nest Learning Thermostat (3rd Gen)
• 2 x Deco Gear WiFi Smart Plugs
• 1 x Wiring plate (for Nest Thermostat installation)

Image: Google Nest Learning Thermostat (left) and Deco Gear WiFi Smart Plugs (right).

Vodič za postavljanje

Google Nest Learning Thermostat Installation

1. Isključite napajanje: Locate your circuit breaker and turn off the power to your heating and cooling system.
2. Uklonite stari termostat: Carefully remove your old thermostat from the wall. Take a picture of the wiring before disconnecting any wires.
3. Install Nest Base: Mount the Nest wiring plate to the wall using the provided screws. Ensure it is level.
4. Spojite žice: Connect the wires from your HVAC system to the corresponding terminals on the Nest base. Refer to the wiring diagram provided with your Nest Thermostat for specific connections. A C-wire is generally recommended for consistent power.
5. Priloži ekran: Pričvrstite Nest ekran na bazu.
6. Vrati snagu: Ponovo uključite struju na prekidaču.
7. Početno podešavanje: Follow the on-screen instructions on the Nest display to connect to your Wi-Fi network and set up your preferences. Download the Google Home or Nest app to complete the setup and control your thermostat remotely.

Image: Dimensions of the Google Nest Learning Thermostat: 3.3 inches (width) x 3.3 inches (depth) x 1.1 inches (height).

Deco Gear WiFi Smart Plug Setup

1. Priključak: Plug the Deco Gear Smart Plug into a standard wall outlet.
2. Preuzmi aplikaciju: Download the appropriate smart home app (e.g., Tuya Smart or a compatible app) from your device's app store.
3. Registracija/Prijava: Otvorite aplikaciju i registrujte novi račun ili se prijavite ako ga već imate.
4. Dodaj uređaj: Follow the in-app instructions to add a new device. The smart plug will typically enter pairing mode automatically (indicated by a blinking light).
5. Povežite se na Wi-Fi: Select your 2.4GHz Wi-Fi network and enter the password. The app will then connect to the smart plug.
6. Integrate with Voice Assistant: To use voice control, link your smart home app account to your Google Assistant or Amazon Alexa account through their respective apps.

Operacija

Google Nest Learning Thermostat Operation

• Podešavanje temperature: Rotate the outer ring of the thermostat to adjust the target temperature. The display will show the current and target temperatures.
• Načini rada: Press the display to access the main menu. Here you can switch between heating, cooling, or eco modes.
• Funkcija učenja: The Nest Thermostat learns your preferred temperatures and schedules over time, automatically adjusting to your habits.
• daljinski upravljač: Use the Google Home or Nest app on your smartphone to control the thermostat from anywhere.
• upravljanje glasom: Integrate with Google Assistant or Amazon Alexa to control your thermostat using voice commands.

Image: The Nest Thermostat display showing 'COOLING' mode with a target temperature of 75 degrees Fahrenheit.

Deco Gear WiFi Smart Plug Operation

• ručna kontrola: Press the power button on the side of the smart plug to manually turn connected devices on or off.
• Kontrola aplikacije: Use the smart home app to remotely turn devices on/off, set schedules, and create automation routines.
• Zakazivanje: Set daily or weekly schedules for devices plugged into the smart plugs to turn on or off automatically.
• upravljanje glasom: Once integrated, use voice commands with Google Assistant or Amazon Alexa to control the smart plugs (e.g., "Hey Google, turn on the lamp").

Održavanje

• čišćenje: Wipe the surfaces of the thermostat and smart plugs with a soft, dry cloth. Do not use abrasive cleaners or solvents.
• Ažuriranja softvera: Ensure your Nest Thermostat and smart home apps are updated to the latest software versions for optimal performance and security. Updates for the Nest Thermostat are typically automatic when connected to Wi-Fi.
• Wi-Fi veza: Periodically check that both devices maintain a stable Wi-Fi connection.

Rješavanje problema

Tehničke specifikacije

Garancija i podrška

For warranty information and detailed support, please refer to the official Google Nest website or contact Google customer service. Keep your proof of purchase for any warranty claims.

Most products come with a standard return policy, typically allowing returns within 30 dana of purchase. Please check the retailer's specific return policy at the time of purchase.