Maiwo KT037B2 4-portni Micro SD na SATA adapter za karticu Korisnički priručnik

1. Uvod

This user manual provides comprehensive instructions for the Maiwo KT037B2 4-Port Micro SD to SATA Adapter Card. It covers product features, specifications, installation procedures, operating guidelines, maintenance tips, and troubleshooting information. Please read this manual carefully before using the product to ensure proper functionality and longevity.

2. Proizvod je gotovview

The Maiwo KT037B2 is an adapter card designed to convert up to four Micro SD (TF) cards into a standard SATA hard drive interface. This allows Micro SD cards to be utilized as a storage solution in devices that support SATA, such as desktop PCs or external hard drive enclosures. It supports RAID0 configuration for enhanced data transfer speeds.

Ključne karakteristike:

• Converts TF (Micro SD) cards into a SATA hard drive equivalent.
• Equipped with 4-port TF card slots.
• Supports RAID0 configuration using two or four TF cards for increased speed.
• Utilizes an advanced chip for faster and more stable data transmission.
• Compatible with Windows, Mac OS, and Linux operating systems.

3. Sadržaj paketa

Molimo Vas da provjerite da li se u paketu nalaze svi artikli:

• 1 x Maiwo KT037B2 4-Port Micro SD / TF to SATA Adapter Card

4. Specifikacije

5. Upute za postavljanje

5.1 Inserting Micro SD Cards

1. Carefully open the adapter casing to expose the circuit board with the Micro SD card slots.
2. Insert your Micro SD cards into the designated slots. Ensure they are fully seated. For RAID0 configuration, use either two or four cards of the same capacity and speed for optimal performance.
3. Close the adapter casing sigurno.

Image: Maiwo KT037B2 adapter with top cover removed, showing the circuit board with four Micro SD card slots. This view illustrates where the Micro SD cards are inserted.

Slika: Krupni plan view of the Maiwo KT037B2 circuit board, highlighting the four Micro SD card slots. This image provides a detailed look at the card insertion points.

5.2 Spajanje adaptera

1. Locate an available SATA data port and a SATA power connector inside your desktop PC or hard drive enclosure.
2. Connect the SATA data cable from your motherboard to the data port on the Maiwo KT037B2 adapter.
3. Connect a SATA power cable from your power supply unit (PSU) to the power port on the Maiwo KT037B2 adapter.
4. Secure the adapter in a 2.5-inch drive bay if installing in a PC or enclosure.

Image: Maiwo KT037B2 adapter assembled, showing the SATA data and power connectors on the side. This illustrates the connection points for integration into a system.

Image: Maiwo KT037B2 adapter with bottom cover removed, showing the circuit board and the SATA connector. This view highlights the internal SATA connection.

6. Uputstvo za upotrebu

6.1 Initial Recognition by Operating System

After connecting the Maiwo KT037B2 adapter to your system and powering it on, your operating system (Windows, Mac OS, or Linux) should recognize it as a standard SATA storage device. If using multiple Micro SD cards for RAID0, the system will detect a single logical drive.

6.2 Formatting and Partitioning

For first-time use, you may need to initialize, partition, and format the detected drive through your operating system's disk management utility. Refer to your OS documentation for specific steps on disk management.

6.3 Prijenos podataka

Once formatted, the adapter will function like any other hard drive, allowing you to store, retrieve, and transfer data to and from the Micro SD cards at speeds enhanced by the RAID0 configuration (if applicable).

Image: Maiwo KT037B2 4-Port Micro SD to SATA Adapter Card, fully assembled and ready for use. This shows the complete product as it would appear when installed.

7. Održavanje

• čišćenje: Keep the adapter clean and free from dust. Use a soft, dry cloth for cleaning. Avoid liquid cleaners.
• Okruženje: Operate the device in a cool, dry environment. Avoid extreme temperatures and humidity.
• Rukovanje: Handle the adapter with care to prevent physical damage. Avoid dropping or subjecting it to strong impacts.
• Micro SD Cards: Ensure Micro SD cards are inserted and removed properly to prevent damage to the card slots or the cards themselves.

8. Otkrivanje problema

8.1 Adapter nije otkriven

• Provjerite veze: Ensure both the SATA data cable and SATA power cable are securely connected to the adapter and the system.
• Napajanje: Verify that your system's power supply unit (PSU) is functioning correctly and providing adequate power.
• SATA Port: Try connecting the adapter to a different SATA port on your motherboard.
• Micro SD Cards: Ensure Micro SD cards are properly inserted. Try testing with a single known-good Micro SD card.

8.2 Spore performanse

• Micro SD Card Quality: Performance is highly dependent on the speed class of the Micro SD cards used. Use high-speed cards for better results.
• RAID0 Configuration: Ensure that if you are using RAID0, all cards are of the same type and capacity. Discrepancies can affect performance.
• SATA Port Speed: Verify that the SATA port on your motherboard supports the expected speed (e.g., SATA III for maximum performance).

8.3 Korupcija podataka

• Sigurno uklanjanje: Always safely eject or unmount the drive from your operating system before powering down or disconnecting the adapter.
• Stabilnost snage: Ensure a stable power supply to prevent sudden power loss, which can lead to data corruption.
• Card Integrity: Periodically check the health of your Micro SD cards. Faulty cards can cause data issues.

9. Garancija i podrška

Za informacije o garanciji i tehničkoj podršci, molimo pogledajte dokumentaciju koja je priložena uz kupovinu ili se obratite prodavaču. Sačuvajte dokaz o kupovini za potrebe reklamacije.