1. Uvod
Thank you for choosing the Kingdom Professional Wireless Microphone System SYSV54. This system is designed to provide clear and reliable audio for various applications, including speech, singing, presentations, and events. It features a 1000-channel UHF design, ensuring stable signal transmission and minimizing interference. This manual provides detailed instructions for setting up, operating, and maintaining your wireless microphone system.
The system includes a metal UHF receiver, two handheld microphones, two bodypack transmitters, and two lavalier/lapel microphones, offering versatile audio capture options.
2. Sigurnosne informacije
Please read and understand all safety instructions before operating this device. Keep this manual for future reference.
- električna sigurnost: Use only the provided power adapter. Ensure the power source matches the voltage zahtjeve.
- Rizik od strujnog udara: Ne otvarajte uređaj casing. Opening the device may result in serious injury and voids the warranty. Refer all servicing to qualified personnel.
- Voda i vlaga: Do not expose the system to water, rain, or excessive moisture. Avoid using the system in high-humidity environments.
- Izvori toplote: Keep the system away from heat sources such as radiators, heat registers, stoves, or other heat-producing appliances.
- ventilacija: Ensure proper ventilation around the receiver. Do not block any ventilation openings.
- baterije: Use the correct type and size of batteries for the handheld microphones and bodypack transmitters. Do not mix old and new batteries, or different types of batteries. Dispose of used batteries responsibly.
- čišćenje: Disconnect the power before cleaning. Use a dry cloth for cleaning. Do not use liquid cleaners or aerosol cleaners.
3. Sadržaj paketa
Provjerite da li su sve stavke prisutne u paketu:
- 1 × 1000-channel UHF Metal Receiver
- 2 × Handheld Microphones
- 2 × Bodypack Transmitters
- 2 × Lavalier/Lapel Microphones
- 2 × Antene
- 1 × Korisnički priručnik (ovaj dokument)
- 1 × audio kabl
- 1 × External Wall Wart Power Supply
4. Upute za postavljanje
4.1 Podešavanje prijemnika
- plasman: Place the receiver on a stable, flat surface, ensuring adequate ventilation. Position it within the desired operating range of the microphones, ideally with a clear line of sight.
- Povežite antene: Screw the two included antennas onto the ANT A-B and ANT C-D connectors on the rear panel of the receiver. Ensure they are securely tightened and positioned vertically for optimal signal reception.
- Priključite napajanje: Connect the external wall wart power supply to the DC INPUT port on the rear of the receiver, then plug the power supply into a suitable electrical outlet.
- Audio izlazna veza: Connect the receiver to your audio mixer, amplifier, or sound system using the provided audio cable. You can use the MIX OUT (1/4" unbalanced) for a combined output, or the individual BALANCED A, B, C, D (XLR) outputs for separate channel control.

4.2 Microphone Setup (Handheld & Bodypack)
- Instalirajte baterije: Open the battery compartment of each handheld microphone and bodypack transmitter. Insert two AA batteries (not included), ensuring correct polarity.
- Attach Lapel Microphones: For bodypack transmitters, plug the lavalier/lapel microphone into the input jack on the bodypack. Secure the lapel microphone to clothing, approximately 6-8 inches from the speaker's mouth.
- Uključeno: Press and hold the power button on each handheld microphone and bodypack transmitter to turn them on. The display will illuminate.



4.3 Frequency Synchronization (IR Sync)
To establish a wireless connection, the microphones/bodypacks must be synchronized with the receiver.
- Prijemnik po uključenju: Turn on the receiver using the POWER button on the front panel.
- Odaberite kanal: On the receiver, select the desired channel (CH A, CH B, CH C, or CH D) for the microphone you wish to sync.
- Initiate Scan (Optional but Recommended): Press the 'SCAN' button on the receiver for the selected channel. The receiver will automatically search for an available, clear frequency.
- Activate IR Sync on Receiver: Press the 'IR SYNC' button on the receiver for the selected channel. The IR indicator on the receiver will flash.
- Align Transmitters: Hold the handheld microphone or bodypack transmitter with its IR window facing the IR window on the receiver, typically within a few inches.
- Confirm Sync: The display on the microphone/bodypack will show the synchronized frequency, and the RF indicator on the receiver will illuminate steadily, indicating a successful connection.
- Repeat this process for each microphone/bodypack.

5. Uputstvo za upotrebu
5.1 Uključivanje/isključivanje napajanja
- Prijemnik: Press the 'POWER' button on the front panel.
- Handheld Microphones/Bodypacks: Press and hold the 'POWER' button on the device until the display illuminates (for ON) or turns off (for OFF).
5.2 Kontrola jačine zvuka
Each channel on the receiver has an independent volume control knob. Adjust these knobs to achieve the desired audio level for each microphone. Start with the volume low and gradually increase it to avoid sudden loud sounds.
5.3 Funkcija isključivanja zvuka
Both handheld microphones and bodypack transmitters feature a MUTE function. Press the 'MUTE' button on the microphone/bodypack to temporarily silence the audio transmission without turning off the device. Press it again to unmute.
5.4 Channel Selection and Auto Scan
The system offers 1000 channels. If you experience interference, you can change the operating frequency:
- On the receiver, press the 'SCAN' button for the desired channel. The receiver will automatically find and select a clear frequency.
- Once a new frequency is displayed, perform an IR Sync (as described in Section 4.3) to synchronize the corresponding microphone/bodypack to the new frequency.
5.5 Savjeti za korištenje
- Radna udaljenost: Maintain a line of sight between the microphones/bodypacks and the receiver for optimal performance. The system has a working distance of up to approximately 200 feet.
- Izbjegavajte prepreke: Walls, metal objects, and large crowds can reduce the effective range and cause signal drops.
- Trajanje baterije: Monitor the battery indicators on the microphones/bodypacks. Replace batteries promptly when they are low to avoid interruptions during use.
- Prevencija povratnih informacija: Position microphones away from speakers to prevent audio feedback. Adjust microphone gain and speaker volume carefully.
6. Održavanje
- čišćenje: Use a soft, dry cloth to clean the exterior of the receiver and microphones. Do not use abrasive cleaners or solvents.
- Zamjena baterije: Replace AA batteries in handheld microphones and bodypacks as needed. Always use fresh batteries for best performance.
- Skladištenje: When not in use for extended periods, remove batteries from microphones/bodypacks and store the system in a cool, dry place, away from direct sunlight and extreme temperatures.
- Antene: Ensure antennas are not bent or damaged. Handle them carefully.
7. Otkrivanje problema
If you encounter issues with your wireless microphone system, refer to the following common problems and solutions:
| Problem | Mogući uzrok | Rješenje |
|---|---|---|
| Nema zvuka iz mikrofona | Microphone/bodypack not powered on Slabe ili prazne baterije Microphone/bodypack muted Not synchronized with receiver Receiver volume too low Audio kabel je isključen | Ensure microphone/bodypack is on Zamijenite baterije Unmute microphone/bodypack Perform IR Sync (Section 4.3) Increase receiver channel volume Check audio cable connections |
| Interferencija ili statički elektricitet | Drugi bežični uređaji u blizini Operating on a crowded frequency Obstructions between transmitter and receiver | Odmaknite se od drugih bežičnih uređaja Use Auto Scan to find a clear frequency and re-sync Ensure clear line of sight; reposition receiver/transmitters |
| Kratak radni domet | Slabe baterije Antennas not properly positioned Excessive obstructions Faktori okoline | Zamijenite baterije Ensure antennas are vertical and unobstructed Minimize obstructions; ensure line of sight Avoid areas with high RF noise |
| Microphone display not working | Slabe ili prazne baterije Uređaj nije uključen | Zamijenite baterije Ensure device is powered on |
8. Specifikacije
Key technical specifications for the Kingdom Professional Wireless Microphone System SYSV54:
- Naziv modela: SYSV54
- Opseg frekvencije nosećeg talasa: UHF 516.0 - 541.0 MHz
- Broj kanala: 1000 (per mic)
- radna udaljenost: Up to ~200 feet (line of sight)
- Snaga predajnika: Up to ~50mW
- Frequency Response (Handheld): 50Hz ~ 18KHz
- Prikaz: LCD (IR sync capable)
- Izvor napajanja: Corded Electric (Receiver), Battery Powered (Transmitters - AA batteries required, not included)
- Audio izlazi: 1/4" Mix Out, 4x XLR Balanced Outputs
- Težina artikla: Otprilike 10.08 funti
- Dimenzije paketa: 22.2 x 12.6 x 7.25 inča
- UPC: 617407927696
9. Informacije o garanciji
The Kingdom Professional Wireless Microphone System SYSV54 is warranted to be free of manufacturing defects for 1 year from the date of purchase. Additionally, a 30-day return policy is offered. This warranty covers defects in materials and workmanship under normal use. It does not cover damage caused by misuse, accident, unauthorized modification, or improper installation.
10. Korisnička podrška
If you have any questions, require assistance with setup, operation, or troubleshooting, or need to make a warranty claim, please contact Kingdom customer support. We are dedicated to ensuring your satisfaction and are always available to help.
Please refer to your purchase documentation or the official Kingdom webstranicu za najnovije kontakt informacije.





