Zinus EU-MBBF-10D Metal Bed Frame Instruction Manual

1. Proizvod je gotovview

This manual provides detailed instructions for the assembly, use, and maintenance of your Zinus EU-MBBF-10D Metal Bed Frame. This low-profile bed frame features a durable metal construction and a slatted base, designed for stability and support.

Image 1.1: The Zinus EU-MBBF-10D Metal Bed Frame with a mattress.

2. Sigurnosne informacije

Važno: Please read and understand all safety warnings and assembly instructions before beginning assembly. Failure to follow these instructions may result in injury or product damage.

• Do not exceed the maximum weight capacity. For single sizes, the capacity is 159 kg (350 lbs). For all other sizes, the capacity is 318 kg (700 lbs).
• Follow the assembly instructions precisely to prevent instability or collapse of the bed frame.
• Držite sve sitne dijelove i materijale za pakovanje dalje od djece i kućnih ljubimaca kako biste izbjegli opasnost od gušenja.
• Prije upotrebe provjerite jesu li svi spojevi sigurno zategnuti. Povremeno provjeravajte i ponovo zategnite pričvršćivače.

3. Sadržaj paketa

Verify that all components are present before starting assembly. If any parts are missing or damaged, contact Zinus customer support.

Image 3.1: All components included in the Zinus bed frame package.

Paket obično uključuje:

• Metal frame components (side rails, end rails, support beams)
• Drvene letvice
• Hardware kit (bolts, washers, nuts)
• Assembly tool (ratchet wrench)
• Uputstvo za upotrebu

Image 3.2: The assembly tool provided for convenient setup.

4. Upute za postavljanje i montažu

Assembly typically requires two people. Follow the numbered steps in the included instruction manual for best results. Ensure you have enough clear space for assembly.

4.1. Priprema

1. Raspakujte sve komponente i položite ih na meku, čistu površinu kako biste spriječili ogrebotine.
2. Identify each part by comparing it to the parts list in your manual.
3. Locate the hardware kit and assembly tool.

4.2. Sklop okvira

1. Connect the side rails to the end rails using the provided bolts and the assembly tool. Do not fully tighten bolts until the entire frame is assembled.
2. Attach the middle support beams to the frame.
3. Once the main frame is assembled, fully tighten all bolts.

Slika 4.1: Primjerample of frame components and their arrangement for assembly.

4.3. Ugradnja letvica

1. Place the wooden slats evenly across the support beams.
2. Secure the slats according to the instructions, typically by pressing them into place or using provided fasteners.

Image 4.2: Detail of the steel frame and wooden slats.

Image 4.3: Slats are designed to provide optimal mattress support and prevent sagging.

5. Upute za upotrebu (Upotreba)

Your Zinus bed frame is designed to provide a stable and supportive foundation for your mattress.

• Place your mattress directly onto the wooden slats. A box spring is not required.
• Ensure the mattress size matches the bed frame dimensions (180 x 200 cm).
• Low-profile design offers approximately 25.5 cm of clearance underneath, suitable for under-bed storage.

Image 5.1: Dimensions of the Zinus EU-MBBF-10D bed frame.

6. Održavanje

Redovno održavanje će pomoći produžiti vijek trajanja okvira vašeg kreveta.

• čišćenje: Obrišite metalni okvir oglasomamp krpom i blagim deterdžentom. Izbjegavajte abrazivna sredstva za čišćenje.
• Provjera pričvršćivača: Periodically (every 3-6 months) check all bolts and connections to ensure they are tight. Re-tighten as necessary.
• Zaštita poda: To prevent scratches on your floor, consider applying felt pads or other protective material to the bottom of the bed frame legs.

7. Otkrivanje problema

If you encounter issues with your bed frame, refer to the following common problems and solutions.

7.1. Škripavi zvukovi

• Uzrok: Labavi spojevi ili trenje između metalnih dijelova.
• Rješenje: Re-tighten all bolts and fasteners. Ensure all wooden slats are properly seated and not rubbing against the frame. The design includes closely spaced wooden slats to minimize noise.

7.2. Nestabilnost ili klimanje

• Uzrok: Improper assembly or loose fasteners.
• Rješenje: Review the assembly instructions carefully. Ensure all parts are correctly oriented and all bolts are fully tightened. Verify the bed frame is on a level surface.

7.3. Poteškoće sastavljanja

• Uzrok: Parts not correctly aligned, or instructions misunderstood.
• Rješenje: Ensure you have identified all parts correctly. Refer to the diagrams in the manual. It is recommended to have two people for assembly. Do not force parts together; if they don't fit, recheck the orientation.

8. Specifikacije

9. Garancija i podrška

Your Zinus EU-MBBF-10D Metal Bed Frame is covered by a 5 godine ograničene garancije. This warranty covers manufacturing defects and material flaws under normal use.

Image 9.1: Your product includes a 5-year limited warranty.

Za reklamacije u vezi s garancijom, nedostajućim dijelovima ili bilo koja druga pitanja vezana za proizvod, obratite se korisničkoj podršci kompanije Zinus putem njihovog službenog website or the retailer where the product was purchased. Please have your model number (EU-MBBF-10D) and proof of purchase ready.