BLS T401

BLS T401 LED Motion Sensor Closet Light User Manual

Model: T401

1. Sigurnosne informacije

Please read all instructions carefully before using the BLS T401 LED Motion Sensor Closet Light. Retain this manual for future reference.

  • Ne izlažite uređaj ekstremnim temperaturama ili direktnoj sunčevoj svjetlosti.
  • Držite uređaj dalje od vode i visoke vlažnosti.
  • Ne pokušavajte rastavljati ili modificirati uređaj. To može poništiti garanciju i predstavljati sigurnosni rizik.
  • Za punjenje koristite samo priloženi kabel za punjenje ili certificirani USB-C kabel.
  • Ensure the installation surface is clean and dry before attaching the light using adhesive methods.

2. Proizvod je gotovview

The BLS T401 LED Motion Sensor Closet Light is a versatile, rechargeable lighting solution designed for various indoor applications. It features a motion sensor for automatic illumination and a long-lasting battery.

BLS T401 LED Motion Sensor Closet Light

Figure 2.1: The BLS T401 LED Motion Sensor Closet Light, a sleek silver bar with a central motion sensor and light strip.

Ključne karakteristike:

  • Super jarko osvetljenje: 200 lumens with 6000K Clean White Glow.
  • Bežična instalacija: No hard wiring required.
  • Senzor pokreta: Automatically turns on when motion is detected in dark or low-light conditions.
  • Punjiva baterija: Built-in 4500mAh UL certified battery for extended use.
  • Više opcija montaže: Magnetic attachment, 3M adhesive tape, or screws.
  • Prekidač sa 3 načina rada: OFF, ON, and AUTO modes for flexible operation.
BLS T401 LED Motion Sensor Closet Light dimensions and motion detection range

Figure 2.2: Diagram illustrating the dimensions of the BLS T401 light (15.1 inches long, 0.9 inches wide, 0.98 inches high) and its 120-degree motion detection range up to 10 feet.

3. Podešavanje

The BLS T401 offers flexible installation options to suit various surfaces.

Metode instalacije:

  1. Magnetni dodatak: The light has built-in strong magnets. It can be directly attached to any iron surface without additional mounting hardware.
  2. ljepljiva traka: For non-magnetic surfaces, use the included 3M adhesive tape. Clean the desired surface thoroughly, peel off the protective film from the adhesive pads, attach them to the metal mounting brackets, and then firmly press the brackets onto the surface. Once the brackets are secure, the light can be magnetically attached to them.
  3. Montaža vijcima: For a more permanent installation, use the included screws. Mark the positions for the screws through the holes on the metal mounting brackets. Drill pilot holes if necessary, then secure the brackets with screws. Finally, attach the light magnetically to the installed brackets.
Four-step diagram showing installation of BLS T401 LED light using adhesive tape and magnetic attachment

Figure 3.1: Step-by-step guide for installing the light using adhesive tape and magnetic brackets, including an example of magnetic attachment to a refrigerator and under-cabinet placement.

4. Uputstvo za upotrebu

The BLS T401 features a sliding switch with three modes: OFF, ON, and AUTO.

Odabir načina rada:

  • ISKLJUČENO: The light remains off regardless of motion or ambient light.
  • ON: The light stays continuously on.
  • AUTOMATSKI: In this mode, the motion sensor activates the light. The light will turn on when it senses motion in both dark and low-light environments. It stays on as long as motion is detected nearby and automatically turns off 18 seconds after motion ceases. A built-in light sensor ensures the light stays off when the ambient environment is bright to conserve battery.

Podešavanje senzora pokreta:

The sensitivity of the motion sensor can be adjusted by rotating the light on its magnetic base. Adjust the angle to achieve optimal lighting and motion detection for your specific environment.

Video 4.1: An official BLS LED video demonstrating the light's features, including its battery and motion sensor functionality.

5. Punjenje

The BLS T401 is equipped with a 4500mAh rechargeable lithium-ion battery.

Proces punjenja:

  1. Locate the USB-C charging port on one end of the light.
  2. Connect the provided USB-C charging cable to the light and to a compatible USB power source (e.g., wall adapter, computer USB port).
  3. The charging indicator light will illuminate to show the charging status. Refer to the indicator light guide for specific details (usually red for charging, green for fully charged).
  4. A full charge can last up to 180 days in AUTO mode, based on 10 activations per day, 20 seconds each time.
Comparison of BLS T401 battery life with other LED lights

Figure 5.1: Visual comparison highlighting the BLS T401's 180-day run time with its large 4500mAh rechargeable battery versus other lights with smaller batteries requiring frequent charging.

6. Održavanje

To ensure optimal performance and longevity of your BLS T401 LED Motion Sensor Closet Light, follow these maintenance guidelines:

  • čišćenje: Wipe the light's surface with a soft, dry cloth. Do not use abrasive cleaners or solvents, as these can damage the finish or electronic components.
  • Održavanje baterije: For best battery life, avoid completely draining the battery frequently. Recharge the light when the brightness noticeably diminishes.
  • Skladištenje: If storing the light for an extended period, charge it fully and store it in a cool, dry place. Recharge every 3-6 months to maintain battery health.

7. Otkrivanje problema

If you encounter any issues with your BLS T401, refer to the following common problems and solutions:

ProblemMogući uzrokRješenje
Svjetlo se ne pali u AUTO režimu.Insufficient ambient light (too bright), no motion detected, or low battery.Ensure the environment is dark enough for AUTO mode. Check for motion within the sensor's range. Recharge the battery.
Svjetlo se prebrzo gasi ili predugo ostaje upaljeno.Motion sensor sensitivity or placement.Adjust the angle of the light on its magnetic base to optimize sensor detection. Ensure no constant motion is within range if it stays on too long.
Svjetlo je slabo ili treperi.Niska baterija.U potpunosti napunite bateriju.
Svjetlo se ne puni.Neispravan kabel za punjenje ili izvor napajanja.Try a different USB-C cable and/or a different USB power source.

8. Specifikacije

FeatureDetalj
BrandBLS
Broj modelaT401
Vrsta izvora svjetlostiLED
Osvetljenost200 lumena
Temperatura boje6000 Kelvin (Clean White)
Kapacitet baterije4500mAh Lithium Ion (UL Certified)
Izvor napajanjaBattery Powered
Dimenzije proizvoda15.1 cm D x 0.9 cm Š x 0.98 cm V
Težina artikla8 unce
MaterijalAkrilonitril Butadien Stiren, Aluminij
Kontrolni metodSlide Switch (OFF/ON/AUTO)
Domet senzora pokretaUp to 10 feet, 120° detection angle
Vrsta instalacijeMagnetic, Adhesive, Screw Mount
Unutrašnja/vanjska upotrebaIndoor

9. Garancija i podrška

BLS nudi a One Year Warranty & Lifelong Service for this product. Should you encounter any issues or have questions regarding your BLS T401 LED Motion Sensor Closet Light, please contact customer service via email at cuscare.blscollection@gmail.com. Please provide your order ID for efficient support. The manufacturer is committed to providing worry-free service.

Povezani dokumenti - T401

Preview BLS HV25 Visor with Integrated Helmet - Technical Specification
Detailed technical specifications for the BLS HV25 visor, a high-protection helmet compatible with BLS 2700next and 2800next PAPRs, designed for industrial safety.
Preview BLS 400/3 Celoobličejová maska: Technické údaje a vlastnosti
Podrobný přehled celoobličejové masky BLS 400/3, včetně jejích materiálů, technických specifikací, certifikací a vlastností pro bezpečnostní složky. Univerzální připojení RD-40 a vysoký ochranný faktor.
Preview Forest Master BLS-3H Priručnik za piljenje trupaca
Sveobuhvatni vodič za Forest Master BLS-3H stolarsku pilu za velike trupce, koji obuhvata informacije o montaži, upotrebi, sigurnosti i garanciji. Naučite kako sigurno i efikasno piliti više trupaca.
Preview Shenzhen Bo Lian Sheng BLS-B55 Bluetooth odašiljač/prijemnik USB Korisnički priručnik
Sveobuhvatno korisničko uputstvo za Shenzhen Bo Lian Sheng BLS-B55, svestrani 3-u-1 Bluetooth odašiljač, prijemnik i USB audio adapter. Saznajte više o podešavanju, načinima rada, specifikacijama i FCC usklađenosti.
Preview Stageworx BLS-315 Pro Lighting Stand B Kit Korisnički priručnik
Uputstvo za upotrebu za Stageworx BLS-315 Pro Lighting Stand B Kit, s detaljnim sigurnosnim uputama, karakteristikama, rukovanjem, postavljanjem, rastavljanjem, tehničkim specifikacijama i odlaganjem u skladu s propisima o zaštiti okoliša.
Preview SpeedyBee F405 Mini BLS 35A 20x20 Stack Uputstvo za upotrebu
User manual for the SpeedyBee F405 Mini BLS 35A 20x20 Stack, detailing specifications, connections, configuration, and firmware updates for the flight controller and 4-in-1 ESC. Includes setup guides for drone builders.