Intelbras IVP 2000 SF Wireless Passive Infrared Sensor Instruction Manual

1. Uvod

This manual provides comprehensive instructions for the installation, operation, and maintenance of the Intelbras IVP 2000 SF Wireless Passive Infrared Sensor. This device is designed to detect motion by sensing infrared radiation emitted by moving objects, providing an essential component for security systems.

2. Sigurnosne informacije

• Prije instalacije i rada pažljivo pročitajte sva uputstva.
• Do not expose the sensor to direct sunlight, extreme temperatures, or high humidity.
• Osigurajte da je uređaj instaliran na stabilnoj lokaciji kako biste spriječili slučajne padove.
• Only use the specified battery type. Incorrect battery usage may cause damage or malfunction.
• Držite uređaj van domašaja djece.

3. Sadržaj paketa

Provjerite da li su sve stavke prisutne u paketu:

• 1x Intelbras IVP 2000 SF Wireless Passive Infrared Sensor
• 1x nosač za montiranje
• 1x Set of Screws and Wall Plugs
• 1x Battery (Alkaline)
• 1x Quick Start Guide (this manual)

4. Proizvod je gotovview

The Intelbras IVP 2000 SF is a wireless passive infrared sensor designed for indoor use. It features advanced detection technology to minimize false alarms and ensure reliable security monitoring.

Slika 1: Front view of the Intelbras IVP 2000 SF sensor. This image displays the white casing of the sensor with the Intelbras logo and "IVP 2000 SF" model designation clearly visible on the top front. The translucent detection lens is prominent on the lower front section.

Ključne komponente:

• PIR Lens: Detects infrared radiation from moving bodies.
• LED indikator: Provides status feedback (e.g., detection, low battery).
• Pretinac za baterije: Sadrži izvor napajanja.
• Tačke montaže: For secure installation on a wall.
• TampPrebaci prekidač: Triggers an alarm if the sensor cover is opened.

5. Podešavanje

5.1. Instalacija baterije

1. Open the sensor's front cover by gently prying it open from the bottom notch.
2. Insert the provided alkaline battery into the battery compartment, observing the correct polarity (+/-).
3. Close the front cover, ensuring it clicks securely into place.

5.2. Montiranje senzora

The sensor is designed for wall mounting. Choose a location that provides optimal coverage of the area to be protected, avoiding direct heat sources or air conditioning vents.

1. Select a mounting height between 2.0 to 2.2 meters (6.5 to 7.2 feet) from the floor.
2. Koristite montažni držač kao šablon za označavanje položaja vijaka na zidu.
3. Izbušite rupe na označenim mjestima i umetnite tiple u zid.
4. Pričvrstite nosač za montažu na zid pomoću priloženih vijaka.
5. Attach the sensor unit to the mounting bracket, ensuring it is firmly seated.

5.3. Pairing with a Security System

Refer to your Intelbras security system or smart hub manual for specific instructions on how to add a new wireless sensor. Generally, the process involves:

1. Putting your security system into "pairing" or "enrollment" mode.
2. Activating the sensor (e.g., by triggering it or pressing a specific button, if available, or by installing the battery for the first time).
3. Confirming successful pairing through the system's interface or LED indicators.

6. Upravljanje senzorom

6.1. Detection Principle

The IVP 2000 SF sensor operates on the principle of passive infrared (PIR) detection. It detects changes in infrared energy within its field of view, which are typically caused by the movement of a warm body. When a significant change is detected, the sensor transmits a signal to the connected security system.

6.2. Status LED indikatora

• Brief Flash: Indicates motion detection.
• Continuous Flash: May indicate low battery or a fault. Refer to the troubleshooting section.
• bez svjetla: Normal standby mode, or battery is completely depleted.

6.3. Detection Range and Coverage

The sensor typically offers a detection range of up to 12 meters (39 feet) with a coverage angle of approximately 90 degrees. Optimal performance is achieved when movement occurs across the sensor's field of view rather than directly towards it.

7. Održavanje

7.1. Čišćenje

Periodically clean the sensor's lens and casing with a soft, dry cloth. Do not use abrasive cleaners or solvents, as these can damage the device.

7.2. Zamjena baterije

When the LED indicator signals a low battery (e.g., continuous flashing or specific system notification), replace the battery promptly. Follow the battery installation steps outlined in section 5.1. Dispose of old batteries according to local regulations.

7.3. Redovne provjere

Test the sensor's functionality regularly (e.g., monthly) by walking through its detection zone to ensure it triggers an alarm or notification on your security system.

8. Otkrivanje problema

9. Specifikacije

• Brand: Intelbras
• Model: IVP2000SF
• Izvor napajanja: Napaja se baterijama
• Vrsta baterije: Alkalna
• Vrsta montaže: Zidni nosač
• Kompatibilni uređaji: Intelbras security systems and smart home hubs
• Dimenzije proizvoda: Približno 17 x 10 x 9 cm (6.7 x 3.9 x 3.5 inča)
• Metoda detekcije: Pasivni infracrveni (PIR)
• Raspon detekcije: Do 12 metara (39 stope)
• Ugao detekcije: Otprilike 90 stepeni
• Radno okruženje: Samo za unutrašnju upotrebu

10. Informacije o garanciji

Intelbras products are covered by a limited warranty. For detailed warranty terms and conditions, please refer to the official Intelbras webweb-mjesto ili kontaktirajte njihovu korisničku podršku. Sačuvajte dokaz o kupovini za slučaj reklamacije.

11. Podrška

If you encounter any issues or have questions regarding your Intelbras IVP 2000 SF sensor that are not covered in this manual, please contact Intelbras customer support through their official channels:

• Webstranica: Visit the official Intelbras webstranica za resurse podrške, često postavljana pitanja i kontakt informacije.
• Telefon: Refer to the contact section on the Intelbras webstranica za lokalne brojeve podrške.