1. Uvod
This manual provides essential information for the proper installation, operation, and maintenance of your FAAC TM XT1 433-1 Channel Transmitter. This device is designed for radio applications, including integrated radio control systems such as the N1D SENSO KIT. Please read these instructions carefully before using the product to ensure safe and efficient operation.
2. Proizvod je gotovview
The FAAC TM XT1 433-1 Channel Transmitter is a compact, white remote control designed for radio applications. It features a prominent black circular button at the top, and a central circular control pad with a home icon, flanked by up and down arrow buttons. The FAAC brand logo is located at the bottom of the device.
Image 1: FAAC TM XT1 433-1 Channel Transmitter
3. Podešavanje i uparivanje
To ensure proper functionality, the transmitter must be paired with your existing radio receiver system (e.g., gate opener, garage door opener). The pairing process typically involves activating a programming mode on your receiver and then transmitting a signal from the new remote.
3.1 Initial Pairing Procedure
- Access Receiver: Locate the control unit or receiver for your gate/door system. This often requires opening the control box.
- Aktivirajte način rada za programiranje: Press and hold the programming button on your receiver. Refer to your receiver's specific manual for the exact button and duration. An indicator light (LED) on the receiver may change state to confirm programming mode is active.
- Transmit from Transmitter: While the receiver is in programming mode, press and hold the desired button on your new FAAC TM XT1 transmitter (e.g., the home button or one of the directional arrows).
- Potvrdite uparivanje: The receiver's indicator light should change again (e.g., flash rapidly, turn solid, or turn off) to confirm successful pairing. Release the button on the transmitter.
- Probni rad: After pairing, test the transmitter by pressing the programmed button to ensure it operates the gate/door correctly.
Note: If you encounter difficulties, consult the specific manual for your FAAC receiver or gate system, as programming steps can vary.
4. Uputstvo za upotrebu
The FAAC TM XT1 433-1 Channel Transmitter is designed for straightforward operation of a single function (e.g., opening/closing a gate).
4.1 Osnovni rad
- Activating the Function: Press the programmed button (typically the central home button or one of the directional arrows) once to send the command to the receiver.
- Raspon: Ensure you are within the operational range of your receiver. Obstructions and environmental factors can affect signal strength.
The black circular button at the top is generally an indicator or a secondary function button depending on the specific system configuration. The directional arrows may be used for specific movements (e.g., partial opening) if supported by your receiver.
5. Održavanje
Regular maintenance ensures the longevity and reliable performance of your transmitter.
5.1 Zamjena baterije
The transmitter requires one CR2 battery. When the transmitter's range decreases significantly or it stops responding, the battery likely needs replacement.
- Otvorite Casing: Pažljivo otvorite odašiljač casing. This may involve removing a small screw or prying open a designated slot.
- Uklonite staru bateriju: Izvadite staru CR2 bateriju, pazeći na njen polaritet (+/-).
- Umetnite novu bateriju: Umetnite novu CR2 bateriju, vodeći računa o ispravnom polaritetu.
- Zatvori Casing: Čvrsto zatvorite predajnik casing.
Stare baterije odlažite odgovorno u skladu sa lokalnim propisima.
5.2 Čišćenje
Wipe the transmitter with a soft, dry cloth. Avoid using abrasive cleaners or solvents, as these can damage the casing ili unutrašnjih komponenti.
6. Otkrivanje problema
If you experience issues with your FAAC TM XT1 433-1 Channel Transmitter, refer to the following common problems and solutions:
| Problem | Mogući uzrok | Rješenje |
|---|---|---|
| Predajnik ne reaguje. | Dead or low battery. Not paired correctly. Out of range. | Replace battery. Re-perform pairing procedure. Move closer to the receiver. |
| Smanjen radni domet. | Slaba baterija. Smetnje signala. Prepreke. | Replace battery. Check for sources of interference (e.g., other radio devices). Ensure clear line of sight to receiver. |
| Transmitter activates wrong function. | Incorrect button pressed. Mis-programmed. | Ensure correct button is pressed. Re-program the transmitter to the desired function. |
7. Specifikacije
- Proizvođač: Faac
- Model: TM XT1 433-1
- Učestalost: 433 MHz
- Kanali: 1
- Dimenzije (paket): 14.2 x 4.9 x 2.4 cm
- Težina: 80 grama
- Vrsta baterije: 1 x CR2 (nije uključena)
- ASIN: B07TPS6HT2
8. Garancija i podrška
For warranty information, please refer to the documentation provided at the time of purchase or contact your FAAC dealer. FAAC products are designed for reliability, and proper installation and maintenance are key to their long-term performance.
8.1 Tehnička podrška
If you require technical assistance or have questions not covered in this manual, please contact your authorized FAAC distributor or visit the official FAAC website for support resources. When contacting support, please have your product model (TM XT1 433-1) and any relevant purchase information ready.
