Nobsound T3 MM Phono Preamplifier

1. Uvod

The Nobsound T3 is a Moving Magnet (MM) phono preamplifier designed to convert phono signals from a turntable to line-level signals. This device is essential for connecting a turntable to audio systems that lack a dedicated phono input, such as stereo amplifiers or active speakers. It features a volume control to adjust the output level.

Image: The Nobsound T3 phono preamplifier integrated into a home audio setup with a turntable and speakers.

2. Sigurnosne informacije

• Provjerite jačinu adaptera za napajanjetage odgovara vašem lokalnom izvoru napajanja.
• Ne izlažite uređaj vlazi ili ekstremnim temperaturama.
• Avoid disassembling the unit; refer servicing to qualified personnel.
• Place the unit on a stable, flat surface to prevent accidental falls.
• Čuvati van domašaja djece.

3. Sadržaj paketa

• Nobsound T3 MM Phono Preamplifier
• DC 12V adapter za napajanje

Image: The Nobsound T3 phono preamplifier and its included DC 12V power adapter.

4. Proizvod je gotovview

The Nobsound T3 features a compact design with essential controls and connections for seamless integration into your audio system.

Prednja ploča

• Prekidač: Toggles the unit on/off. Features a red indicator light when active.
• Dugme za jačinu zvuka: Adjusts the output level of the preamplifier.

Zadnja ploča

• GND terminal: Ground connection for the turntable to reduce hum and noise.
• MM INPUT (R/L): RCA inputs for connecting your Moving Magnet (MM) turntable.
• AUDIO OUTPUT (R/L): RCA izlazi za povezivanje s vašim amplifier ili aktivni zvučnici.
• DC 12V: Power input for the included 12V DC adapter.

Slika: Detaljna view of the Nobsound T3's front panel (Power switch, Volume knob) and rear panel (GND, MM Input, Audio Output, DC 12V).

5. Podešavanje

Follow these steps to connect your Nobsound T3 phono preamplifier to your audio system:

1. Connect Turntable to MM Input: Use RCA cables to connect the audio output of your MM turntable to the MM INPUT (R/L) jacks on the rear panel of the Nobsound T3. Ensure left (white) and right (red) channels are matched.
2. Povežite žicu za uzemljenje: Attach the ground wire from your turntable to the GND terminal on the Nobsound T3. This helps to minimize hum and noise.
3. Povežite se na AmpZvučnici/Zvučnici: Use another set of RCA cables to connect the AUDIO OUTPUT (R/L) jacks of the Nobsound T3 to an available line-level input (e.g., AUX, CD, LINE IN) on your amplifier or active speakers. Do not connect to a phono input on your amplifier, as this unit already provides phono pre-amplifikacija.
4. Priključite napajanje: Plug the DC 12V power adapter into the DC 12V input on the rear panel of the Nobsound T3, then plug the adapter into a power outlet.
5. Uključeno: Pritisnite POWER switch on the front panel to turn on the unit. The red indicator light will illuminate.

Image: Connection diagram illustrating how to integrate the Nobsound T3 into an audio system.

6. Uputstvo za upotrebu

Once the Nobsound T3 is properly set up, operating it is straightforward:

1. Ensure all connections are secure and the unit is powered on.
2. Start playing a record on your turntable.
3. Podesite VOLUME knob on the front panel of the Nobsound T3 to achieve the desired output level.
4. Further volume adjustments can be made using your amplifier or active speakers' volume control.

7. Održavanje

• Čistite uređaj mekom, suhom krpom. Ne koristite tekuća sredstva za čišćenje ili rastvarače.
• Keep the unit free from dust and debris to ensure proper ventilation.
• Povremeno provjeravajte sve kablovske spojeve na čvrstoću i istrošenost.

8. Otkrivanje problema

Nema izlaza zvuka

• Ensure the Nobsound T3 is powered on (red indicator light is lit).
• Verify all RCA cables are securely connected to the correct input/output jacks.
• Check the volume level on both the Nobsound T3 and your ampLifier/aktivni zvučnici.
• Potvrdite svoje amplifier/active speakers are set to the correct input source.

Brujanje ili šum

• Ensure the turntable's ground wire is properly connected to the GND terminal on the Nobsound T3.
• Provjerite ima li labavih kablovskih veza.
• Udaljite uređaj od drugih elektronskih uređaja koji mogu uzrokovati smetnje.
• Try using different RCA cables, as faulty shielding can cause hum.

9. Specifikacije

Image: The Nobsound T3 phono preamplifier shown in hand, highlighting its compact dimensions.

10. Garancija i podrška

For warranty information and technical support, please refer to the documentation provided with your purchase or contact Douk Audio customer service. Keep your purchase receipt for warranty claims.