MPC B-3744-105

MPC Complete Factory Remote Activated Remote Start Kit User Manual

Model: B-3744-105

1. Uvod i krajview

This manual provides comprehensive instructions for the installation, operation, and maintenance of your MPC Complete Factory Remote Activated Remote Start Kit for 2011-2015 Acura RDX. This kit allows you to remotely start, warm, or cool your vehicle using your existing factory key fobs.

The kit includes a Crimestopper RS0 Add-on Remote Start module, a Fortin EVO-ALL Data Bypass Module, and a T-Harness. The firmware is preloaded, ready for programming to your specific vehicle. This system is designed for 2011-2015 Acura RDX C1-D2 models with Key-to-Start ignition and gas engines. It is compatible with automatic transmission vehicles only.

Please read this manual thoroughly before beginning installation or operation to ensure proper functionality and safety.

MPC Complete Remote Start Kit components

Slika 1.1: Gotovoview of the MPC Complete Remote Start Kit components, including the main module, bypass module, wiring harnesses, and installation tip sheet.

2. Vehicle Requirements and Compatibility

Before proceeding with installation, ensure your vehicle meets the following requirements:

Vehicle compatibility chart showing key-start ignition is compatible and push-to-start is not

Figure 2.1: Visual representation of vehicle compatibility, emphasizing that only conventional key-start ignition systems are supported, not push-to-start or hybrid vehicles.

3. Postavljanje i instalacija

This kit features a semi plug-and-play installation with a T-Harness, significantly reducing the number of required wiring connections compared to typical systems. However, some wiring connections will still be necessary. Detailed, step-by-step instructions with wire colors and locations are provided via a downloadable tip sheet.

3.1 Potrebni alati (nisu uključeni)

Žuti plastični alat za polugu s MPC logotipom

Slika 3.1: Prample of a plastic pry tool, useful for safely removing interior trim panels during installation.

3.2 Proces instalacije je završenview

  1. Priprema: Disconnect the vehicle's battery. Access the necessary wiring harnesses and modules in your vehicle, typically behind the dashboard or steering column.
  2. Povezivanje modula: Connect the T-Harness to the vehicle's wiring and the remote start and bypass modules.
  3. Ožičenje: Make any necessary hardwired connections as specified in the detailed tip sheet. These connections are crucial for proper system operation.
  4. Programiranje modula: Follow the specific programming steps for the Fortin EVO-ALL Data Bypass Module and the Crimestopper RS0 Add-on Remote Start. This typically involves a sequence of key turns and button presses.
  5. testiranje: Ponovo spojite akumulator i temeljito testirajte sistem daljinskog pokretanja prije ponovnog sastavljanja unutrašnjosti vozila.
  6. Ponovno sastavljanje: Secure all modules and wiring, then reassemble the vehicle's interior trim.

A person with basic knowledge of car electronics wiring should be able to install this product successfully. For detailed instructions, refer to the exclusive copyrighted step-by-step installation tip sheet provided by MPC's professional technicians. A link to download this sheet will be provided with your purchase.

Gauge indicating ease of installation, with the needle pointing towards 'Easier'

Figure 3.2: An illustration suggesting the semi plug-and-play nature of the installation makes it easier than fully hardwired systems.

4. Uputstvo za upotrebu

This remote start system utilizes your vehicle's existing factory key fobs, eliminating the need for additional remotes.

4.1 Starting Your Vehicle Remotely

To activate the remote start function, press the "lock" button three times on your factory key fob within a short succession. The vehicle's parking lights will flash, and the engine will start.

Various OEM factory key fobs for remote vehicle starting

Slika 4.1: Prample of various OEM factory key fobs that can be used to activate the remote start system.

4.2 Remote Start Features

5. Održavanje

The MPC Remote Start Kit is designed for long-term reliability and typically requires minimal maintenance. However, periodic checks can ensure optimal performance.

6. Otkrivanje problema

If you encounter issues with your MPC Remote Start Kit, refer to the following common problems and solutions:

ProblemMogući uzrokRješenje
Vehicle does not start remotely.
  • Incorrect key fob sequence.
  • Hood pin switch engaged.
  • Slab akumulator vozila.
  • Door/trunk/hood ajar.
  • Brake pedal pressed.
  • System not programmed correctly.
  • Problem sa ožičenjem.
  • Ensure "lock" button is pressed three times quickly.
  • Check that the hood is fully closed.
  • Provjerite zapreminu akumulatora vozilatage.
  • Ensure all doors, trunk, and hood are closed.
  • Ensure no pedals are pressed.
  • Re-verify programming steps.
  • Inspect all wiring connections.
Remote start activates but vehicle shuts off immediately.
  • Bypass module not programmed or faulty.
  • Incorrect wiring connection (e.g., tach signal).
  • Re-program the bypass module.
  • Verify all wiring connections, especially those related to ignition and engine status.
Remote start range is poor.
  • Interferencija.
  • Weak key fob battery.
  • Move to an area with less radio frequency interference.
  • Replace the battery in your factory key fob.

Ako ovi koraci ne riješe problem, obratite se tehničkoj podršci MPC-a za daljnju pomoć.

7. Specifikacije

FeatureDetalj
Naziv proizvodaComplete Factory Remote Activated Remote Start Kit
BrandMPC
Broj modelaB-3744-105
Kompatibilno vozilo2011-2015 Acura RDX C1-D2 (Key-to-Start, Gas, Automatic Transmission)
Daljinski upravljačUses existing factory key fobs (3x lock press)
Run Time Options5, 10, 20, or 30 minutes (programmable)
Auto-Start Options2, 3, or 4 hourly (programmable)
Dimenzije20.32 x 12.7 x 5.08 cm (Proizvod)
Težina1.36 kg
ProizvođačMPC proizvodi

8. Tehnička podrška i garancija

8.1 Tehnička podrška

MPC provides U.S. based technical support for this product. If you have questions about installation, programming, or troubleshooting, assistance is available.

MPC Technical Support banner with a person wearing a headset smiling

Figure 8.1: MPC offers free expert technical support from Monday to Friday, 9am to 5pm MST.

8.2 Informacije o garanciji

Specific warranty details are typically provided with your product purchase or can be found on the manufacturer's official website. It is recommended to retain your proof of purchase for warranty claims. The warranty generally covers defects in materials and workmanship under normal use.

For detailed warranty terms and conditions, please refer to the documentation included with your kit or visit the MPC Products website.

Povezani dokumenti - B-3744-105

Preview Vodič za podešavanje Akai MPC-a: Instalacija i aktivacija
Sveobuhvatan vodič za podešavanje Akai MPC hardvera i softvera, koji obuhvata kreiranje računa, registraciju proizvoda, instalaciju softvera i upravljanje iLok licencama.
Preview Akai Professional MPC korisnički priručnik: MPC X, Live, One, Key, Studio, Touch
Sveobuhvatno korisničko uputstvo za Akai Professional MPC seriju, koje pokriva podešavanje, rad i funkcije za MPC X, MPC X Special Edition, MPC Live, MPC Live II, MPC One, MPC One+, MPC Key 61, MPC Key 37, MPC Studio mk2 i MPC Touch.
Preview Moxa MPC-3000 serija - Kratki vodič za instalaciju
Sveobuhvatan vodič za brzu instalaciju industrijskih panelnih računara Moxa MPC-3000 serije, koji pokriva prekoview, kontrolna lista pakovanja, izgled, dimenzije, instalacija hardvera (montaža na ploču i VESA), opisi konektora i postupci napajanja/uzemljenja.
Preview Crestron MPC-M10/20/25 Vodič za upotrebu i instalaciju | Kontroler medijske prezentacije
Detaljan vodič za rukovanje i instalaciju Crestron MPC-M10/20/25 Media Presentation Controllera. Saznajte više o funkcijama, podešavanju, programiranju i rješavanju problema za profesionalna AV okruženja.
Preview Akai Professional MPC ONE Kratki vodič
Sažet vodič za početak korištenja Akai Professional MPC ONE-a, koji pokriva njegove karakteristike, sadržaj kutije, dijagram povezivanja i osnovne kontrole za muzičku produkciju.
Preview ORTEC Alpha/Beta ručni sistemi za brojanje: MPC serija - Vodič za proizvode
ORTEC-ovi ručni sistemi za brojanje alfa/beta zračenja, uključujući modele MPC serije kao što su MPC-900-DP i MPC-1000-GF, nude visokoučinkovitu detekciju zračenja s naprednim scintilacijskim i proporcionalnim detektorima protoka plina za laboratorijske primjene.