Hayward W3T-Cell-3 TurboCell Salt Chlorination Cell Instruction Manual

1. Proizvod je gotovview

The Hayward W3T-Cell-3 TurboCell Salt Chlorination Cell is designed for in-ground swimming pools up to 15,000 gallons. It provides naturally sanitized water, reducing the need for traditional chlorine methods and offering a more comfortable swimming experience.

Image: The Hayward W3T-Cell-3 TurboCell Salt Chlorination Cell, a key component for pool sanitization.

Ključne karakteristike:

• Delivers silky smooth, naturally sanitized water that won’t irritate eyes, dry out skin, or cause fabrics to fade.
• Reduces chlorine costs by up to 50%.
• Nezavisno certificirano od strane Nacionalne sanitarne fondacije (NSF) za pouzdane performanse.
• Compatible with Hayward AquaRite, AquaRite Pro, SwimPure Plus salt chlorination systems.
• Compatible with Hayward OmniLogic, OmniHub, ProLogic, and AquaPlus automation and control systems.

2. Postavljanje i instalacija

Proper installation is crucial for the optimal performance and longevity of your TurboCell. Always ensure the pool pump is off and power to the chlorinator is disconnected before beginning installation.

2.1 Sigurnosne mjere

• Always disconnect power to the pool pump and chlorinator before handling the salt cell.
• Ensure proper ventilation if working with chemicals.
• Nosite odgovarajuću ličnu zaštitnu opremu (LZO) kao što su rukavice i zaštita za oči.

2.2 Koraci instalacije

1. Isključite napajanje: Disconnect power to the pool pump and the salt chlorination system at the circuit breaker.
2. Unplug Salt Cell: Unplug the salt cell connector from the chlorinator control unit.
3. Odvod vode: Open the strainer lid on the pool pump to allow air into the system, helping to drain water from the salt cell for easier removal.
4. Uklonite staru ćeliju: Loosen the unions on both ends of the existing salt cell and carefully remove it from the plumbing.
5. Instaliraj novu ćeliju: Position the new Hayward W3T-Cell-3 TurboCell, ensuring the water flow indicator on the cell aligns with the direction of water flow in your plumbing.
6. Zategnite veze: Securely tighten the unions on both ends of the salt cell to prevent leaks.
7. Ponovo priključite napajanje: Plug the salt cell connector back into the chlorinator control unit. Close the strainer lid on the pump.
8. Vrati snagu: Turn on the pool pump and the salt chlorination system at the circuit breaker.
9. Check Salt Levels: After powering on, press the "Diagnostics" button on your chlorinator to check the salt level readings. The system will calibrate, and the correct reading should appear.

Slika: Front view of the Hayward W3T-Cell-3 TurboCell Salt Chlorination Cell, showing its design and connections.

Image: Diagram illustrating the dimensions (length, height, width, cord length, weight) of the Hayward W3T-Cell-3 TurboCell.

3. Operacija

The Hayward TurboCell works by converting salt in your pool water into chlorine, providing continuous sanitization. This process is managed by your compatible Hayward chlorination or automation system.

3.1 How Salt Chlorination Works

1. Pool salt (NaCl) is added to the water.
2. Water dissolves salt into a low, teardrop-level salinity.
3. The chlorinator adjusts chlorine production for perfect balance.
4. The salt conversion cell turns salt into chlorine gas (Cl₂).
5. Chlorine gas (Cl₂) reacts with pool water to form a sanitizing compound (HOCl).

Image: Diagram illustrating the five-step process of how Hayward salt chlorination systems convert salt into chlorine for pool sanitization.

Image: Illustrates the natural sanitization process, creating a virtually endless supply of chlorine from salt.

4. Održavanje

Regular maintenance ensures the longevity and efficiency of your TurboCell. Inspect and clean the cell every 3 months or as needed.

4.1 Cleaning the Salt Cell

1. Isključite napajanje: Turn off the chlorinator and pool pump, and unplug the salt cell.
2. Ukloni ćeliju: Remove the salt cell from the plumbing as described in the installation steps.
3. Pripremite rastvor za čišćenje: Use a salt cell cleaning holder (if available) or a suitable container. Fill the cell with a solution of 1/3 muriatic acid and 2/3 clean water.
4. Natapanje: Allow the cell to soak for approximately 15 minutes to dissolve mineral deposits on the titanium plates. Do not exceed 15 minutes to avoid damage.
5. Ispiranje: Pour out the cleaning solution and thoroughly rinse the salt cell with clean water.
6. Ponovo instaliraj: Reinstall the cleaned salt cell into the plumbing, ensuring secure connections. Reconnect the salt cell plug and restore power to the system.

Napomena: Always follow safety guidelines when handling muriatic acid. Refer to your chlorinator's manual for specific cleaning instructions and recommended pool chemistry levels.

5. Otkrivanje problema

If your Hayward W3T-Cell-3 TurboCell is not performing as expected, consult the following common issues and solutions:

For detailed diagnostic codes and advanced troubleshooting, refer to your specific Hayward chlorinator control unit's manual.

6. Specifikacije

7. Podrška

For further assistance, technical support, or warranty inquiries, please contact Hayward customer service. You can also visit the official Hayward webstranicu za dodatne resurse i informacije o proizvodu.

• Hayward Webstranica: hayward.com
• Služba za korisnike: Refer to your product packaging or the Hayward webstranicu za najnovije kontakt informacije.