Scheppach DP16VLS Uputstvo za upotrebu stubne bušilice

1. Uvod

This manual provides essential information for the safe and efficient operation, assembly, maintenance, and troubleshooting of your Scheppach DP16VLS Pillar Drill. Please read these instructions carefully before using the machine to ensure proper function and to prevent injury or damage.

Image 1: Scheppach DP16VLS Pillar Drill with included vice.

2. Sigurnosna uputstva

Uvijek se pridržavajte općih sigurnosnih propisa pri radu s električnim alatima. Nepoštivanje ovih uputa može dovesti do strujnog udara, požara i/ili ozbiljnih ozljeda.

Opća sigurnosna upozorenja:

• Sigurnost radnog područja: Radno područje održavajte čistim i dobro osvijetljenim. Nered ili tamna područja mogu uzrokovati nesreće. Ne koristite električne alate u eksplozivnim atmosferama, kao što je prisustvo zapaljivih tekućina, plinova ili prašine.
• električna sigurnost: Utikači električnih alata moraju odgovarati utičnici. Nikada ne modificirajte utikač ni na koji način. Izbjegavajte kontakt tijela sa uzemljenim površinama.
• Lična sigurnost: Always wear eye protection. Use hearing protection when operating the drill. Wear appropriate clothing; avoid loose clothing or jewelry that can get caught in moving parts. Secure long hair.
• Upotreba i njega alata: Ne forsirajte električni alat. Koristite odgovarajući električni alat za vašu primjenu. Isključite utikač iz izvora napajanja prije bilo kakvih podešavanja, promjene pribora ili skladištenja električnog alata.

Specific Pillar Drill Safety:

• Always secure the workpiece firmly to the drill table using the included vice or clamps. Never hold the workpiece by hand.
• Ensure the drill bit is correctly installed and tightened in the chuck before operation.
• Adjust the drilling depth stop to prevent drilling into the drill table.
• Keep hands clear of the rotating drill bit and all moving parts.
• Allow the motor to reach full speed before beginning to drill.
• Do not attempt to clear chips or debris while the drill is operating.

3. Proizvod je gotovview i karakteristike

The Scheppach DP16VLS is a robust pillar drill designed for precise drilling in various materials including wood, metal, aluminum, and plastic. It features a powerful 500W motor and a variable speed system.

Ključne karakteristike:

• motor: Powerful 500 Watt motor.
• brzina: 5 adjustable speeds ranging from 600 to 2650 revolutions per minute (rpm).
• chuck: Keyed chuck with a capacity of 1.5 to 13 mm.
• Dubina bušenja: Maximum drilling stroke of 50 mm.
• Radni sto: Robust steel structure, height-adjustable, and inclinable up to 45 degrees.
• Vice: Includes a vice with a maximum clamping capacity of 62 mm.
• Laser: Integrated positioning laser for precise drilling point alignment.
• Outreach: 105 mm outreach from the column to the chuck center.

Image 2: Diagram illustrating ergonomic handle, precision laser, variable speed, and belt drive.

Image 3: Diagram illustrating adjustable drilling table, chuck capacity, heavy base, and 500W motor.

4. Montaža

The Scheppach DP16VLS Pillar Drill is typically supplied partially disassembled. Follow these general steps for assembly. Refer to the detailed assembly diagrams in your product packaging for specific instructions.

1. Sastavljanje baze i stuba: Secure the main column to the stable base using the provided fasteners. Ensure all connections are tight.
2. Montaža stola: Attach the work table to the column, ensuring it can be adjusted vertically and rotated freely.
3. Sklop glave bušilice: Mount the drill head assembly onto the top of the column. Connect any necessary electrical components as per the wiring diagram.
4. Ugradnja stezne glave: Install the drill chuck onto the spindle. Ensure it is seated correctly and securely.
5. Handle and Vice: Attach the feed handles and the included vice to the work table.
6. Instalacija remena: If not pre-installed, install the drive belt between the motor and spindle pulleys. Adjust belt tension as needed (refer to Maintenance section).

Important: Before first use, verify all fasteners are securely tightened and all components are correctly aligned.

5. Uputstvo za upotrebu

5.1 Preparing for Drilling

• Odaberite svrdlo: Choose the appropriate drill bit for the material and hole size. Insert it into the chuck and tighten securely with the chuck key.
• Podesite brzinu: Open the belt cover and adjust the belt position on the pulleys to select the desired speed. Higher speeds are generally for smaller bits and softer materials, while lower speeds are for larger bits and harder materials. Close the belt cover before operation.
• Adjust Work Table: Loosen the table lock and adjust the work table height and angle as required for your workpiece. Re-tighten the lock securely. The table can be tilted from +45° to -45°.
• Osigurajte radni komad: Place the workpiece on the table and secure it firmly using the included vice or clamps. Ensure it cannot shift during drilling.
• Set Drilling Depth: Use the depth stop mechanism to set the desired drilling depth. This prevents drilling too deep.
• Activate Laser: Turn on the integrated laser guide to precisely align the drilling point.

Image 4: User drilling into a wooden beam, demonstrating proper workpiece securing.

Image 5: User drilling into a metal workpiece secured by the included vice.

Image 6: Close-up of the depth scale and laser guide for precise control.

5.2 Procedura bušenja

1. Osigurajte da se poštuju sve sigurnosne mjere.
2. Turn on the drill using the power switch. Allow the motor to reach its operating speed.
3. Polako spustite svrdlo u radni komad koristeći ručke za pomicanje. Primjenjujte stalan, ravnomjeran pritisak.
4. Do not force the drill. If the motor slows significantly, reduce feed pressure.
5. Periodically retract the drill bit to clear chips, especially when drilling deep holes in metal.
6. Once the desired depth is reached, retract the drill bit completely from the workpiece.
7. Turn off the drill and wait for the chuck and drill bit to stop rotating before removing the workpiece or making adjustments.

6. Održavanje

Redovno održavanje osigurava dugotrajnost i siguran rad vaše stubne bušilice.

• čišćenje: After each use, clean the machine of dust, chips, and debris. Use a brush or compressed air. Do not use solvents that may damage plastic parts.
• podmazivanje: Periodically lubricate moving parts such as the column, spindle, and feed mechanism with light machine oil.
• Zategnutost pojasa: Check the drive belt tension regularly. A properly tensioned belt should have slight give when pressed. Adjust if too loose or too tight to prevent slippage or excessive wear.
• Održavanje stezne glave: Keep the chuck jaws clean and free of debris. Lubricate the chuck mechanism occasionally.
• Elektroinspekcija: Regularly inspect the power cord and plug for damage. If damaged, have it replaced by a qualified technician.

7. Otkrivanje problema

This section addresses common issues you might encounter with your Scheppach DP16VLS Pillar Drill.

8. Specifikacije

Technical data for the Scheppach DP16VLS Pillar Drill.

• Broj modela: DP16VLS
• Proizvođač: Scheppach
• Šifra artikla: SCH5906810901
• Dimenzije proizvoda: 43.5 x 22 x 60 cm
• Težina artikla: 14 kg
• Materijal: Čelik
• Boja: Plava
• završiti: Sjajna završna obrada
• Izvor napajanja: Corded Electric
• Voltage: 230 Volt
• Wattage: 500 Watt
• Amperage: 16 Ampere
• Kapacitet stezne glave: 1.5 - 13 mm
• Max Drilling Depth: 50 mm
• Brzine: 5 (600-2650 rpm)
• Maksimalna brzina rotacije: 2650 o/min
• Nivo zvuka: 84 decibela
• Dužina kabla: 2000 mm
• Max Distance Chuck to Table: 170 mm
• Max Distance Chuck to Base: 250 mm
• Nagib stola: -45° do +45°
• Uključene komponente: Pillar Drill, Vice

Image 7: Diagram illustrating the 50 mm drilling depth capacity.

Image 8: Diagram showing suitable materials for drilling: wood, steel, metal, aluminum, plastic.

Image 9: Close-up of drill head showing 105 mm outreach from column to chuck center.

9. Garancija i podrška

For warranty information, please refer to the documentation included with your purchase or contact Scheppach customer service directly. Keep your proof of purchase for any warranty claims.

For technical support, spare parts, or service inquiries, please contact your authorized Scheppach dealer or visit the official Scheppach webweb mjesto za kontakt detalje.