ANVIZ VF10 Biometric and PIN Access Control Device User Manual

1. Uvod

The ANVIZ VF10 is a compact and versatile biometric access control and time attendance terminal designed for efficient security and workforce management. It integrates fingerprint recognition and PIN authentication methods, offering robust security with ease of use. The device supports multiple communication interfaces, including TCP/IP, Mini USB, RS485, and Wiegand Out, allowing for flexible integration into various security systems.

This manual provides detailed instructions for the installation, configuration, and operation of your ANVIZ VF10 device. Please read this manual thoroughly before using the product to ensure proper functionality and safety.

2. Sigurnosne informacije

• Ensure the power supply used is DC12V and meets the device's power requirements. An incorrect power supply can damage the device.
• Do not expose the device to extreme temperatures, humidity, or direct sunlight unless protected by an optional waterproof casing (IP53 rated).
• Avoid installing the device in areas with strong electromagnetic interference.
• Ne pokušavajte sami rastavljati ili popravljati uređaj. Za sve servisne radove obratite se kvalifikovanom osoblju.
• Održavajte senzor otiska prsta čistim i suhim za optimalne performanse.

3. Sadržaj paketa

Upon opening the package, please verify that all items are present and in good condition. The standard package typically includes:

• ANVIZ VF10 Biometric Terminal
• Pribor za montažu (vijci, tiple za zid)
• Connection cables (e.g., for power, network, door lock)
• Vodič za brzi početak (ako je primjenjivo)
• Note: The DC12V power supply is not included and must be purchased separately.

4. Device Overview

Familiarize yourself with the main components of the ANVIZ VF10 device.

4.1 Prednji View

The front panel includes the LCD display, keypad, and fingerprint sensor. The LCD shows operational status, time, date, and menu options. The keypad is used for PIN entry and menu navigation. The fingerprint sensor is for biometric authentication.

4.2 Ugao View

4.3 Strana View

4.4 Portovi i veze

The ANVIZ VF10 features various ports for communication and integration:

• TCP/IP (Ethernet): For network connectivity and communication with management software.
• Mini-USB: For local data transfer and firmware updates.
• RS485: For connecting to external slave readers (e.g., ANVIZ T5S biometric or RFID readers) or other compatible devices.
• Wiegand Out: For connecting to a remote relay (e.g., ANVIZ SC011) or third-party access control panels.
• Relejni izlaz: For direct control of a door lock or gate.
• Ulazna snaga: For DC12V power supply.

5. Instalacija

Proper installation is crucial for the device's performance and longevity. It is recommended to have a qualified technician perform the installation.

5.1 Montaža uređaja

1. Choose a suitable location on a wall, ensuring it is at an appropriate height for all users to comfortably access the fingerprint sensor and keypad.
2. Use the provided mounting template (if available) to mark the drilling points on the wall.
3. Izbušite rupe i umetnite zidne čepove.
4. Secure the mounting bracket (if separate) or the device directly to the wall using the screws.

5.2 Ožičenje

Prije bilo kakvog povezivanja, provjerite je li napajanje isključeno.

• Priključak za napajanje: Connect the DC12V power supply to the designated power input terminals. Observe polarity.
• Mrežna veza (TCP/IP): Connect an Ethernet cable from your network switch/router to the device's RJ45 port.
• Door Lock Connection: Connect the device's relay output to your electric door lock. Consult the door lock's manual for specific wiring diagrams (e.g., NO/NC connections).
• RS485 veza: If connecting a slave reader (e.g., T5S), connect the RS485 A and B terminals of the VF10 to the corresponding A and B terminals of the slave reader.
• Wiegand Out Connection: If connecting to a remote relay (e.g., SC011) or an access control panel, connect the Wiegand Data 0, Data 1, and Ground terminals.

Always refer to the detailed wiring diagram provided in the full product manual for precise connections.

6. Početno podešavanje

After successful installation and wiring, power on the device using the power button. The device will boot up and display the main interface.

6.1 Osnovna konfiguracija

1. Odabir jezika: Navigate through the menu to select your preferred language (Italian, German, English, Turkish).
2. Datum i vrijeme: Podesite tačan datum i vrijeme za tačnu evidenciju prisustva.
3. Mrežne postavke: Configure the device's IP address, subnet mask, and gateway if using TCP/IP communication. This can be done manually or via DHCP.
4. Administratorska postavka: It is highly recommended to register at least one administrator fingerprint and/or PIN immediately to secure the device and access advanced settings.

7. Upravljanje korisnicima

The VF10 can store up to 1000 users and 1000 fingerprints. User management is typically performed through the device's menu or via the CrossChex software.

7.1 Adding a New User

1. Access the main menu (usually by pressing 'M' or 'OK' and entering administrator credentials).
2. Navigate to "User Management" or "Add User".
3. Unesite jedinstveni korisnički ID.
4. Register Fingerprint: Place the user's finger on the sensor three times, lifting it slightly between each scan, until successful registration is confirmed.
5. Set PIN (Password): Enter a numeric PIN for the user.
6. Assign user roles (e.g., normal user, administrator).
7. Sačuvajte korisničke podatke.

7.2 Brisanje korisnika

From the "User Management" menu, select "Delete User", choose the User ID, and confirm the deletion.

8. Operacija

The ANVIZ VF10 supports fingerprint and ID+PIN authentication for access control and time attendance.

8.1 Fingerprint Authentication

1. Place a registered finger flat on the fingerprint sensor.
2. The device will verify the fingerprint. A successful verification will be indicated by a visual and/or audible prompt, and the door will unlock (if connected).

8.2 ID + PIN Authentication

1. Enter your User ID using the keypad.
2. Press the 'OK' button.
3. Enter your registered PIN.
4. Press the 'OK' button. A successful verification will be indicated, and the door will unlock.

8.3 Upisivanje/odjavljivanje

Use the 'IN' and 'OUT' buttons on the keypad before performing authentication to record attendance events. For example, press 'IN', then authenticate with fingerprint or PIN.

8.4 Viewing Records

The device allows viewing of attendance records directly on the LCD screen. Navigate through the menu to "View Records" or "Attendance Logs". The device can store up to 50,000 log records.

9. Software Integration (CrossChex)

The ANVIZ VF10 integrates with ANVIZ CrossChex software for comprehensive management of users, devices, attendance data, and reporting.

9.1 CrossChex Standard Software

CrossChex Standard provides advanced features for managing multiple devices, complex shift schedules, access rules, and detailed attendance reports. It allows for centralized user enrollment and data synchronization.

9.2 CrossChex Lite Software

CrossChex Lite is a streamlined version for basic time attendance and access control functions. It is suitable for smaller installations or simpler requirements.

9.3 Data Download and Reporting

Connect the VF10 to the CrossChex software via TCP/IP or Mini USB to download attendance logs and user data. The software can then generate various reports, including daily, weekly, and monthly attendance summaries, late arrivals, early departures, and overtime.

10. Održavanje

• čišćenje: Gently wipe the fingerprint sensor and LCD screen with a soft, dry, lint-free cloth. Do not use abrasive cleaners or solvents.
• Sigurnosna kopija podataka: Regularly back up attendance records and user data using the CrossChex software to prevent data loss. The device has a lithium battery for data storage during power outages, but regular backups are still recommended.
• Ažuriranja firmvera: Check the ANVIZ official website for available firmware updates to ensure optimal performance and access to new features. Follow the provided instructions carefully for firmware upgrades.

11. Otkrivanje problema

12. Specifikacije

13. Garancija i podrška

For warranty information, please refer to the warranty card included with your product or visit the official ANVIZ website. Technical support is available through ANVIZ authorized distributors and service centers. Please have your product model and serial number ready when contacting support.

Za dodatnu pomoć, možete posjetiti Službenik ANVIZ-a Website ili kontaktirajte svog lokalnog distributera.